LineDX

Hi @iniBuilds Managed vs selected speed ETA to TOD is the same whereas managed speed is M.85 compared to selected M.88. Technically, selected speed ETA to TOD should be earlier than managed but ETAs are the same for both managed vs selected speed. Looks like its a bug.

Hi @richboy2307 The taws logic, I made sure all the sound settings are on. Taking off from YYC and flying west towards the mountains at lower altitudes, without flaps, without gears many of the TAWS callouts are missing like Terrain ahead, too low flaps, too low gear. GPWS callouts come up like 2000. and so on.

@richboy2307 please review the autosave file with TO THS showing out of range with all batts on and external power connected. TOTHSoutofrange.bin

The TCAS does not generate any TA/RA even when traffic is visible. Even the aircrafts don't change the shape/color when comes in close proximity.

1.0.7 can hear the Taws sounds but some are missing or something wrong with logic. Don't hear *terrain ahead". No retard sound on landing as well.

Hi @iniBuilds, I really like the new flight planning tool in OIS. Please add the CI option on the form as currently it does not have the CI option and most of the flight plans generated it gives CI 15. Also UAL2018 output format does not generate any OFP. Gives an error. Please look into it. Regards

Hi @iniBuilds how about making engine and sensor covers an option in OIS. Many of the users like me, we start from the gate and in real life when you get the plane form gate engine and sensor covers are not there until or unless the plane is parked for extended duration of time. Please make it optional so that users who want to have the covers on they can do so from the OIS menu and people who don't want they can turn it off from the OIS menu. Regards

Hi team, updated to version 1.0.7 and many of the above reported bugs still exist. 1. In fs2020 T.O.THS is always out of range at cold and dark startup even after following the above mentioned instructions. 2-When open offset menu, the drop down list does not disappear after clicking the items. You have to press the ESC button after selections for lists to disappear. 6-The ac did not capture the ALT constraint during managed climb mode. Example, departing OPKC BADUL1 DEP. KC509 has an ALT cap FL070 but it did not capture and continued to climb just like OP climb when the AC was in fact in Managed CLB. It was maintaining the managed speed though. 7-Did not capture the STAR constraint ALT/FL during managed DES. VDEV more than 2500ft thus unable to capture the GS altitude of 3000ft set on FCU. Happening on MIMAL1 ARR and ILS36RZ for OPLA. New ones: 1-The TCAS does not generate any TA/RA even when traffic is visible. Even the aircrafts don't change the shape/color when comes in close proximity. 2-switch the TCAS from TA/RA mode to standby and then back to TA/RA mode does not clear ECAM notification. 3-When change the MACH speed in the CRZ mode from managed to selected. The ETA does not change in the CRZ tab in PERF section. It's bug. MACH.78 and M.88 has the same ETA for the T/D which is 94miles away. This can't be right. Regards

Hi @richboy2307 I tried cold and start, turned all 4 batteries to ON, but still T.O.THS shows out of range as shown in the screenshot. strange, its only in FS2020. FS2024 works as expected. Regarding the menu items, highlighted blue is very light and hard to see. If you guys can make it dark blue, it would be easy to see the selections. Have a look at the attached pic(edited in ms paint with little dark blue border) I see someone else on the forum had the same issue. Regards

Hi @richboy2307 thank you for your kind support. The headphone simulation was already turned off, still don't hear the TAWS warnings. RESET WASM, re-installed but no joy. Hope it gets addressed. Regards

Hi team, TCAS not giving any TA or RA when traffic in range even visible. TCAS and transponder both ON. set to TA/RA mode. GPWS does not generate any terrain callouts when flying low towards the mountains, gears up, flaps up. No terrain ahead, pull up, pull up, too low flaps, too low gear etc. GPWS system is selected on in SURV page as per FAQ section. Regards,

Thank you for looking into it Vrishabh, T.O.THS issue is present no matter what airport/gate the aircraft is at. Both variants, but only in FS2020. Example, OPKC gate 60, CYHZ gate 20. This bug only in FS2020. FS2024 works fine. Will keep you posted. any update on the OIS selected items border colors? Regards

@inibhulds @haza2 @richboy2307 can you please review my post. Also noticed, while enroute and zooming ND in for BTV setup it showes dep airport randomly. Using navigraph. FYI

Hi @iniBuilds team, love flying this plane but here and there. there are some random bugs which I would like to report. Using latest V1.0.6 1. In fs2020 T.O.THS is always out of range at cold and dark startup but gets normal after engine start. In FS2024 its always the normal and set to correct settings. Not sure if it is normal or not. 2-When open offset menu, the drop down list does not disappear after clicking the items. You have to press the ESC button after selections for lists to disappear. 3- Randomly the tab does not automatically change to correct segment of the flight. Happens rarely though. Noticed it today, it did not change from T/O to CLB when the ac was in climb mode. But after reselecting the PEFF menu it corrected. 4-FLEX temperature is always +67. Not sure if it is right? 5-Plane still takes off with nil or near to none input after V1. 6-The ac did not capture the ALT constraint during managed climb mode. Example, departing OPKC BADUL1 DEP. KC509 has an ALT cap FL070 but it did not capture and continued to climb just like OP climb when the AC was in fact in Managed CLB..It was maintaining the managed speed though. 7-Did not capture the STAR constraint ALT/FL during managed DES. VDEV more than 2500ft thus unable to capture the GS altitude of 3000ft set on FCU. Happening on MIMAL1 ARR and ILS36RZ for OPLA.. 8-OIS menu items on the right side of the OIS screen does not show a green border around them as used to be in previous updated. Its hard to see selected items. The left side of the menu shows the green borders correct. Hope all these bugs get fixed in the next updates. Regards

You are welcome. In the previous builds ap used to auto disconnect just like Fenix on rudder/nws input but with 1.0.6 rudder/nws input does not disconnect ap so you have to manually disconnect it.

Turn off the autopilot after landing.

Hi team, since update to 1.06. The OIS selected items are not highlighted green. The left side menu items are shown in proper border color but not the items on the right hand side. Please fix it. Thanks

Top up the engine oil in OIS maintenance page. That should fix the issue.

Top up the engine oil in maintenance page on OIS. The engines won't start without oil no matter how much you try. Lol

Yes not in 24.its only in 20. It goes away after engines start though. Not sure if it's normal behaviour or not? But with engines off ground power connected/apu running the arm/disarm/arm spoilers does not fix it. As said only starting the engines clear this message in 20.

+1

No one stopped Fenix developing 350. It was Amir's own decision. I like Fenix 320 but the way Amir made remarks about ini was very unprofessional. JUST AN FYI, FENIX IS BASED ON PROSIM AND PROSIM DOES NOT HAVE 350.

Agree! Very honest feedback.

Brightness and bloom issue in FS2024. There is no option or config file for adjustments in FS2024. ANF is fine in FS2020. Overall cockpit lighting is way better in 2020. Microsoft needs to give users and option to control bloom and brightness.

Hi ini team, please don't decrease the art quality for the sake of better fps. To be honest ini 350 visual model, VC and textures are leading edge and best ever art and texture work I have ever seen in the flight sim in past 2 decades. The art, modelling and textures give near to real look. Please keep it the same. For some people even with high end machines, they like to run 4k and want maximum fps(more than 40 is irrelevant I guess). What's the point of having 100+ fps by compromising the visual quality. Does not make any sense. My 2 cents