LineDX

Same issue here.

that did not do the trick for me. Tried it few times, deleted the wasm folder. run sim as admin. No joy.

no battery issue here. but cant update the nav data(navigraph) stucks at 41.47mb.. screenshot attached.

While on the base leg to ILS 10R at OPIS, the aircraft failed to turn onto final when under autopilot. At that point, all instrument inputs ceased responding. The autopilot would not disengage, and no controls had any effect. This appears to be a typical WASM freeze. I had only encountered a couple of WASMs since purchasing the aircraft in February, but after updating to SU3 and version 1.1.4, I’m now experiencing them on almost every flight. Interestingly, the aircraft performed fine with all versions upto 1.1.3 and during the SU3 beta. Something seems off either with the ASOBO sim update or the iniBuilds aircraft version. It happened on VGHS-OPIS on A350-1000.

Had it a couple of times.

V1.1.4 SU3.. when open the doors you see across the fuselage.

Wasm shortly after landing when about to exit the runway. YYZ-IAH landing runway 8r.

Hi everyone, I've noticed that the terrain display on the ND is constantly sweeping from bottom to top. Is this expected behavior? I don't recall seeing this in previous builds. Regards, Microsoft Flight Simulator 2024 2025.mp4

I noticed it too. There is a switch in ois for arming and disarming the slide in ground operations tab.(blue and yellow) not sure what is normal sop?

Same issue when sending the v speeds from the OIS. It happened only on CYHZ-OPLA ofp from simbreif

That's right. I can't understand how testers miss some of the basic malfunctions before build release. Ini people are talented and dedicated to 350, getting rid of some basic errors will make a vast majority of simmers happy as they are mostly point a to b casual flyers.

Reinstall. Deleting the WASM files first. I had the same issue but after reinstall and wasm deletion did not see this issue.

Works in 1.1.4

Tested with 1.1.4. VGHS Rnp 14 worked normal.

Tested it in 1.1.4 on 900. Works!

still an issue in V1.1.4

Same issue after 1.1.3

Same issue with CYYC RNP 17L. Did not capture virtual glide path 3' slope at 4800ft on final approach point. The pfd shows ILS app whereas FMS shows RNP approach. It was fine before this update..

I haven't checked 1000 but for 900 it's quite annoying. Hope @iniBuilds can come up with a quick hotfix.

Here is another one where you loose LOD, textures, and HUD on zooming out. Microsoft Flight Simulator 2024 2025.mp4

This is initial loading. on initial load loose LOD and there is breif hammering noise as well. Microsoft Flight Simulator 2024 2025 (2).mp4

Hi team, I've just tested this in v1.1.3. The flickering issue when zooming out appears to be resolved, but there are still some problems: Texture quality is noticeably degraded, especially when zooming out and returns to normal on zooming in. Large gaps are visible on the glareshield, behind the LCDs, and behind the rudder pedals. Upon initial loading, textures appear degraded and there's a brief hammering noise for a second before things return to normal. However, the texture degradation issue still occurs when zooming out. I’ll upload a video later to illustrate these issues.

Same issue. Need to he fixed. It makes manual landing impossible in crosswinds in low ifr weather. @iniBuilds

Ini is looking into the hud rain issue. In the meantime you can use the windshield wipers that will fix the text blurring/distortion caused by rain.

Looks like its an Airbus issue. Tried with Fenix A320 OPIS-OPKC in FS2020. 59600kgs for the ZFW and 9400kgs for the fuel. Same thing, after FL180 climbing at around 500ft/min. Took about 270nm for TOC FL340. Most likely an ISA issue.