LukeFF
-
Posts
400 -
Joined
-
Last visited
-
Days Won
3
Content Type
Profiles
Forums
Downloads
Posts posted by LukeFF
-
-
The click spot for the parking brake interferes with being able to swap radio frequencies, when the brakes are set. Would be nice to see this improved. 🙂
-
1
-
-
In all of A330 Driver's A300 videos you can see the wing icing probe but I am not seeing it right now. Was it accidentally removed?
-
When performing a go-around after a missed approach, I cannot seem to get the plane to hold a steady altitude, even though I've dialed in a low altitude per the missed approach instructions on the approach plate and engaged altitude hold. Is there a certain procedure I should follow in times like this?
-
Per this item in the update notes: Oil replenishes itself between flights.
It doesn't look like this is fixed - after I landed and shut down last night, the oil level went back up to what it was before we took off. This was after an approximately 60-minute flight. -
On the takeoff performance page, the altimeter setting is always in hPa, even after changing it to inHg on the Settings page.
-
The UPS parking positions 1R to 7R at the south cargo ramp are reversed - they should be oriented to the east instead of the west.
-
I just purchased GSX last night and so I wanted to see how it interacts with the A300 freighter. Overall it looks good, but I had a few questions:
- To not have containers automatically loaded, I should input the total weight of the freight I want to carry on the EFB but not click on "Apply Load" on the Weight and Balance page?
- Refueling: it looks like right now the only option is to use the blue popup screen when the truck parks next to the plane. Is that correct?
Any other tips for using GSX with the A300 would be much appreciated. 🙂
-
Are there any default MSFS commands to disconnect the autopilot, or would I need to use a 3rd party app like SPAD for that?
-
Well, unless there is confirmation from MS of this being a "micro-update" I'm going to assume that the A300 is using Navigraph data for the flight planner (or unless iniBuilds says something to the contrary).
-
5 hours ago, Crabby said:
Yes, you can see the charts/ofp on the EFB, however the plane itself uses the in-sim data for the FMC, currently. INI has said they will look to adding Navigraph FMC data, but no timeframe or commitment to actually do so.
Mmm...the FMS page on the MCDU says it is using the 25 January - 22 February AIRAC cycle, which is the current one.
-
The shape of the switches on the clock doesn't look right, plus they are missing labels on each one.
Additionally, the "DATE" label and the two flathead screws are missing, and the OFF label should be red:
-
1
-
-
My 2 cents as someone who's been a beta tester for other flight sims going on 10-plus years: no, it's not the customer's job to find out what is causing a bug/crash, etc., but it's very helpful if customers can at least provide some baseline information about how & when an issue is occurring. Otherwise, developers can end up spending an inordinate amount of time trying to chase down how and/or why a bug is occurring. I can only imagine how complex a plane like the A300 is to ensure everything is working as it should.
-
2
-
-
6 hours ago, Nico - Gumby said:
And this was with 1.0.3?
Yes
-
The last flight where this happened was from KONT to KABQ:
KONT/26L RAJEE3 AVRRY DCT LANCY J134 GUP LOWBO3 KABQ/08 -
To add to this as well, the flight plan should also be draggable. Right now it's a hassle to move through each page.
-
2
-
-
Had a ~90-minute flight yesterday where we consumed a few quarts of fuel on each engine, and the levels were showing about 98% Today, when I loaded up the plane each oil tank was topped off back to the default capacity while the EFB still showed them at the ~98% or so level.
-
As the title says - I put this at 1000 feet, but upon reload it goes back to 1500 feet.
-
Hmm, looks like this is an issue when trying runway starts. Any way this could be looked at and fixed? Sometimes I like to check things without doing a full startup sequence, but these constant CTDs prevent that.
-
Hmm, it looks like there is some sort of conflict between the KONT payware scenery and the A300. Loading up at a default airport like KSBD causes no problems.
-
After this latest update, the plane constantly crashes when trying to load a flight. For whatever reason, this will happen 2 or 3 times before it finally decides to load properly.
This never happens with the 310, so it makes me wonder what is different here.
-
The checklists should be able to be moved up and down by clicking and then dragging on them, instead of having to rely solely on the scrollbar.
-
3
-
-
4 hours ago, KorEl said:
After 4 flights with the passenger version, for my first with the freighter I realized that the maintenance effects are not airframe specific (had worn tires, required engine oil servicing). I think they should be.
Agreed, per-livery maintenance would be much better than what we have now.
-
2
-
-
The two little bugs on the oil quantity gauges take forever to move up and down, because once you start moving the scroll wheel over them the cursor loses focus and ends up zooming in or out the camera view. Some sort of better solution is needed.
-
1
-
-
Right now, the EFB just gives you the raw readout of METARS instead of translating them into plain English, like on the FBW A320 EFB. Similar deal with the terms on the Load & Balance page - it's a bunch of upper-case acronyms that - at least for those not well-versed in aviation terminology - can be difficult to decipher. A more readable option for things like this would be much appreciated.
Altimeter setting on EFB doesn't affect performance page
in Other
Posted
Alright, I'll check it again.