LukeFF
-
Posts
387 -
Joined
-
Last visited
-
Days Won
2
Content Type
Profiles
Forums
Downloads
Posts posted by LukeFF
-
-
Yes, it's been a problem since MSFS 2020. Very annoying.
-
In MSFS 2024 SU2, the jetways struggle to attach to the aircraft. They will come forward, stutter, then move back, and then repeat the process before it finally attaches on usually the third attempt. I experienced this with Gate 11.
This was with the Fenix A319.
-
Also, deleting the scenery indexes changed nothing.
-
There are doubled-up buildings at the northeast end of the airport. 2020 version is not installed.
-
-
In the main terminal area, there is vegetation growing on top of the roofs.
-
On 6/7/2025 at 2:02 AM, haza2 said:
@richboy2307 Will be able to advise. Thank you for your report.
Thank you. It also happened just now when taking off from 25R. Framerates dropped down to the single digits, causing me to veer all over the runway. TLOD and OLOD again at minimum.
-
Yes, I have the same problem here. FPS are nice and smooth coming in to land, and then about 2 miles out, the frame rates drop through the floor and thus make a proper landing impossible.
Something just isn't right with this scenery.
-
The ILS 04L localizer is entirely misaligned with the runway when trying to land with the A300. It's displaced far to the left of where it should be.
-
Would be nice to have this as an option.
-
Seconded. This is a great piece of hardware that needs to be made functional with the 320.
-
2
-
-
I changed my frame generation to FSR3, and so far that has yielded much more stable performance.
-
This is how close I have to get from Gate 34B to see all the details of the tower. Any further than that, and then the details start getting chopped off very quickly.
Zoom back to behind my plane, and this is what it looks like:
This is entirely unacceptable for an "Enhanced" airport:
-
2
-
-
.
Never mind, issue likely found.
-
You're talking to a spambot.
-
Per the thread originally started here, the clock is still missing a lot of details: https://forum.inibuilds.com/topic/21164-issues-with-the-clock/
-
Not so with 2024. With all other planes, once you set up your controller profile, it will remember your choices, so you don't have to manually choose them every time. With the A300 it's not doing that and reverting to default on every startup.
-
@Eddie, I just noticed in a recent announcement post that N692FE is shown in one of the images. However, if you type in "FedEx" in the app, the only one that shows up is N667FE.
Has this one not been uploaded yet? And please, again, we need PW liveries for FedEx too. 🙂
-
3 hours ago, Eddie said:
Hello,
Thank you. Forwarded to the team! 🙂
Thanks
Also, it looks like "Register" is misspelled as "Regisrer"-
1
-
-
Okay, thanks
-
9 hours ago, Eddie said:
Hello,
Would mind sending me your routing? I do feel this may have been due to a sudden weather change. Just to double check, what is your turbulence setting?
Thank you 🙂
Max turbulence setting
Route: DUCKZ5 HELAR DCT KOMMA J6 DWINE RIFFL3 -
Okay, good. Yes,it's been working as expected, then.
-
The clearance frequency comes up as "Clearance Clearance" on the radio in BATC. Their developers said they cannot do anything about it and it must be fixed by the scenery developer.
-
10 hours ago, Eddie said:
Hello,
Do you perhaps have any MSFS damage settings turned on? If so, which?
I've forwarded this to the team regardless. Thank you 🙂No, I have all damage settings turned off.
Flickering textures on jetways
in Support
Posted
On the part of the jetways that attach to the aircraft, there is a noticeable strip of texturing that flickers constantly.