I tried every combination of potential icing weather scenarios and was unable to achieve any visible icing effects what so ever. i got one very brief engine icing warning on the ecam which soon disappeared even though i did not turn on the engine icing switches on the over head, despite still being in icing conditions.

Is this a bug and can you confirm that icing effects are modelled in to both the systems and the graphics side, ice build up on windows and other areas etc?. Im not talking about the separate ice and snow feature that can be independently selected in the efb and does show ice on the wings and fuse if i use the slider.

thank you

another small observation:

On the rear cargo door frame there are several edges that have some substantial gaps between the outer skin and the inner paneling.

Thanks for checking!

MSFS24, Steam, Windows 11

BASIC is displayed correctly.

1. The 3d Model of the Pilot Avatar is positioned forward of the seat (similar to how the Co-Pilot was before the patch).

2. The 3D model of the Pilot Avatar is seated "into" the seat. This is causing the pilot figure too sit low in the cockpit visual model.

Hope these screens help! :)

Upon initial load, the lighting doesn't work. The tablet says the lighting is set to Deep Blue and at 100% brightness, but it remains dark. It is only when you click the colour again, does it begin to work.

This is also the same when launching at a gate, it says Deep Blue but you need to cycle again.

Looks like on first load the lighting or shaders are not working properly.

Videos attached demonstrating the issue.

https://drive.google.com/file/d/12b9eyytiUZCUuVdH8c16AqZs1MHPYOgT/view?usp=sharing

https://drive.google.com/file/d/1I_Myq7xkmxbEIaXz0h8AfYAv2dHzfvvb/view?usp=sharing

Also "No mobile" sign still does not illuminate in the cabin as I have mentioned already in a previous post.

Many thanks for your amazing work and support as always. :)

I'd like to thank you for taking care of all of our reports, the current visual state of the aircraft is close to perfection! ❤️

I've found two little spots on v1.0.3 that I'd like to pass on.

1. The left inner flap canoe has some issues with duplicated and cutoff decals. This is across all liveries.

   

   

2. The covers for the aileron actuators on both wings are clipping when drooped.

   

Thanks for checking!

I loaded up the Etihad paint last night to do a flight and noticed that the elevator and rudder were stuck into odd positions. The elevators showed full nose up deflection and the rudder full left. However they were simply cosmetic and the actual flight control page showed correct placement (neutral when not commanded to move). This persisted the entire flight and movement of the indicated surfaces did not seem to be visually showing anymore.

Wondering if I'm missing something, but can't seem to locate anywhere within the paintkit any textures for doors - either standalone decals or within the Fuse Main. Do we have to manually create door outlines or is there something I'm missing?

Thanks

Hello, little bug with the 3d model, one of the hose is not rotating with the wheels. Video for illustration.

Many thanks.

unfortunately I'm quite underwhelmed with the visual quality of the A380. It looks shiny from far away, but a closer look reveals a lot of flaws, sloppy work and lack of quality control.

Here's a list of what I've encountered so far:

1. Slats clip heavily into the engine pylons.

2. Engine pylons are not flush with the wing

3. Spoiler actuatory clip into flaps when extended during Flaps 0

   

4. There's a gap between the two MCP panels on both the Captain's and FO's side

   

6. Main gear bay doors are heavily bugged in their animation logic, remaining partly open in flight

   

7. On the both RR and EA engines, the blades in the rear of what I believe is the N2 stage are constantly moving very slowly. If they are intended to be static, why would they move? If they are intended to be animated, they don't move relative to their engine parameters.

8. Strobes and beacon are not in sync. Both do a free run and overlap with different timings, which is very atypical for Airbus aircraft and not something I've ever seen on an A380.

   https://cdn.discordapp.com/attachments/1549515224917213376/1549515230529200229/Microsoft_Flight_Simulator_2024_2026-09-15_21-59-29.mp4?ex=6aaafa03&is=6aa9a883&hm=a4e11b5adbb589151e1fe386e9f70753a0b93711e3c64bd393aaa6b429c3c139&

I understand this is a very complex aircraft and things can be missed, but there's definitely a lack of QA when obvious issues with slats and gear doors are missed.

While based on your track record I don't expect a lot to be fixed, can at least the obvious items be taken care of before you head over to your next project please?

Thank you.

first of all thanks for the first round of fixes, this is highly appreciated!

With v1.0.1 something seems to be going on with cargo door textures.

Currently they look like this for me:

Liveries have been updated via the iniManager and they all show the same glitch. The EFB says I'm on v.1.0.1 so not sure if it's on my side?

Cheers!