Other

Hello, I just noticed that if I want to fly to Stuttgart or to Belgrade or if I’m departing from them, none of them show the approaches and departures in the MCDU. It just says none, even if I scroll left,right, up and down. I hope you can fix it. Kind regards Harp0nAv

Perhaps I should not post this information on this forum, but I will try nonetheless. For more realism, I have found checklists for the A320Neo V2 aircraft from JAYDEE. These indicate landing in LOC mode, which I don't understand. I am unable to follow the landing procedure according to these instructions. Are there any manuals or video tutorials available on this topic?

Hello, I wanted to know why there are no stairs available on the a320 neo, if there are airports that do not have jetways, for example Liverpool airport. Greetings

I must say I really enjoy flying your planes especially A320 version 2, but the problem im having is my plane rocks back forth during all of my flights..any of my other planes it’s smooth sailing with an occasional turbulence…hoping it’s a easy fix.

Hi, Ini A320neo stuck during loading on my MSI laptop. The loading line reaches the end for a long time but never gets beyond that. I have no map mod installed, just the basic Steam install. Has anyone experienced this issue? Zoltan

Cant find it on Aircraft list after installation

Hello, I understand a new aircraft takes some time to load but I wanted to try out the neo a few nights ago and I was stuck on a loading screen that was seeming 100% loaded but it just wouldn’t go into the flight (as seen in picture). After over 15 minutes of it being stuck loading I just alt F4. Iv tried reinstalling and emptying the community folder but nothing so far. nny help would be greatly appreciated really want to put some hours into the plane. Thank You!

Hello. I try to map my Xtouch Mini with AAO software. I can handle almost everything what I need instead of one. I cannot found any propper input key, any Input Event, any Lvar for changing the frequency between standby and active. Could You help me with that? I have tried (L:INI_CPT_VHF_TRANSFER_SWITCH_COMMAND) (L:__RADIO_CPT_SEL_TRANSIsPressed) and several others

Hi, Hope someone can shed some light here in whats causing this. OK I have setup a flight plan through Simbrief and exported it into the aircraft. I can see the flight plan on the ND. Take off climb and the Aircraft settles down at the desired Altitude and speed and on line with the plan. Decreased my throttles back. Then all of sudden Aircraft gores into a steep climb turns off AP. And all hell is let loose. Question : Whats causes this?

I’m an Xbox Series X user and I own all the additions of MSFS 2020. I have a massive issue with trying to steer the A320 Neo V2 on the ground,I’ve tried it with the steer wheel on & off. Is this a bug or am I missing something. The aircraft its self is fantastic, hopefully I will eventually be able to get a full flight. Also can i ask about the simbrief, I’m currently on the free version of the app but this doesn’t work on this aircraft, but it does on other aircraft in the sim. Look forward to hearing from you. Geoff Hargreaves

Hello, Without activating FSUIPC I get arround 70-80 FPS with the A320 v2. However, when I start FSUIPC (to do online flying) my FPS immediately drop to around 35-45 FPS. Please note that I tried with several other airplanes like the PMDG, LVFR, Horizon to see if there is any kind of impact with/without FSUPIC but there isn't. I got the same FPS in both scenarios. Can you please help me to fix this issue with the A320? Perhaps this is due to a bad config setting or something like that? I'm on SU15. My PC if helps: Ryzen 7 7800X3D, 32GB DDR5, 7900XTX 24GB. Thanks for your help.

Hi all, I am having some really bad FPS/Performance on the ground. I'm not sure if this is a wider issue which is why I am posting on here. I have tried other comparable aircraft such as the FBW A320 and the performance is okay. If you need some figures or help with this please let me know, Robyn

I resolved that last issue, but I have a new issue where the ATC doesn't work. Sorry for the bad camera quality in the vid, I recorded it using my chromebook. inibuilds a320 support vid.mp4

Hello, Could anyone point in the direction of the aircraft.cfg file please? I would like to tweak a few thing to make it airline specific. Thanks in advance Dave

Seems it wont work? Please fix (same with A300 earlier)

I don't know if it's just me or the others have the same problem as mine, my first flight with a320neo was great, there's no performance issue, no significant FPS drop, but the next day( which is yesterday) when I wanna start another flight (By then my GPU utilization is almost 99%), after about couple min when i switch the elctric system on and importing the flight plan, my performance drop to about 5~10 FPS. However when I restart the flight, everything is back to normal, but the issue will appear after couple min. I do believe i have a decent PC spec. Note, I have turn all the AI traffic off and no GSX used.

Hi, Once I got my throttles sorted out, I'm realy enjoying flying the 320, however I have noticed one small thing and that is when coming into land I use my speed Brakes to help in bringing down my speed and noticed that these are not being animated outside, even thou the Speed Brake lever is indicating open the panel. Am I missing something here?. So any help will be greatly appreciated.

Hi. I am using MSFS2020-SU15 on my PC. Have been trying the new 320 Neo v2, and am having some issues with the ATC radio. I have switched the radio on, and volume up. Sometimes I can hear ATC, other times not. Also, when I am able to hear, it suddenly stops, and I only see the text but no voice. Also, selecting the ATC frequencies (Clearance, Tower, ATIS) from the ATC popup do not work. Is there something I could be doing wrong. I would be most pleased for assistance on this, and if it is an issue with the aircraft please let me know. Thanks /./ Jay

If anyone else have this problem you can try this. Before you read. I am on Xbox. This solution may not translate to PC. When trying to load my flight plan in to the EFB, the EFB says that I need to enter my pilot ID (even though I have done it). When spawning in Sweden the EFB settings are on metric. In SimBreif I have feet. I changed to imperial on the EFB and then it loaded in the flight plan just fine. Seems you have to have the same measurement systems in the A320 neo v2 EFB settings and SimBreif to make it work.

Hi all, loving the new Neo but every time I try to take off the aircraft veers off the runway uncontrollably. Everything is set up correctly. I think