General Discussion

Hello, if i set the manual aircraft time this freeze if i change page, but updates again if i go back to the position/time page.

Hi All, Does anyone else has a problem with some of the ground being raised up higher than the other part of the taxiway by holding P1 of 23R? I have updated to SU4 and uninstalled and reinstalled the airport without success...

Hi Im on Xbox and have recently updated to version 1.18 for the A350 and when I go to external view I first get a message on my screen warning about shutting off avionics due to low memory and then shutting my entire plane off and making it sink into the ground. This all started happening after SU4 btw.

Jetways not reaching aircraft seems to happen quite regularly. This happened today at the new WSSS (TaiModels) bought through iniBuilds: https://imgur.com/a/J6nr576 Aircraft is parked properly.

As described in the title: if I change the flight direction and set a StepClimb in the FMS to descend from FL390 to FL380, can AutoStepClimb execute this operation automatically? Additionally, if I switch from metric RVSM to imperial RVSM and need to descend from FL371 to FL370, can AutoStepClimb complete this descent process?

If you fly PC, the you can enjoy, should you want to, a 35% discount on the A350 currently. However, if you’re Xbox, there is 0% discount. Why the discrepancy?

Hey y'all, i'm on the go switching from 2020 to 2024 and wondered if the iBlueYonder Dallas Love is available for MSFS 2024. The iniBuilds sales page says it's only for 2020, but other pages selling the scenery say otherwise. I bought the product via iniBuilds. Thanks

Anyone know why this is showing up for FS24. Obviously, we all know the story, so not sure where a FS2024 version came from.

Hi! very excited for the release of the A350, just was wondering as I haven't seen anything posted about this topic for a while but I was wondering if there will be any further development into integrating a shared cockpit system, either in house or through 3rd party developers (Yourcontrols)? Thanks for all the hard work!

Dear iniBuilds, I hope you’re doing great! I wanted to ask whether you might consider implementing a feature similar to the Fenix aircraft, where the MCDU and EFB can be accessed via a web browser. It’s such a fantastic way to use an iPad or phone during flight, and it would be amazing to have something like this in your aircraft — ideally sooner rather than later. I know there are some third-party web remote workarounds, but having an official and properly styled implementation would really elevate the experience. It shouldn’t be too difficult to add, right? 😉 Also, considering your aircraft are priced a bit higher than Fenix’s, this feature would…

Hello iniBuilds Team, After updating the A350 to version 1.1.8, I noticed an issue on the VSD during the final approach. The aircraft symbol draws a straight line toward the end of the runway instead of following the expected path. Could you please confirm whether this behavior is intentional or if it is a known bug? Thank you for your support.

Yesterday I tried doing a flight from OTHH to KLAX in the A35K. I turned in the electrical power of my plane. I then opened GSX. It said "simbrief OK" but then only loaded one passenger. I restarted couatl to quit GSX because it didnt seem to work. In the OIS I hit LOAD FUEL and set it to instand and the fuel loaded correctly. When I hit LOAD ZFW i could tell the airplane moved slightly but the OIS perf page when I automatically got the weights AND in the fmc when I automatically set them were like around 150 tons, I forget exaxt number, but it was equal to the zero fuel weight, meaning the ZFW didnt load correctly. I also made sure all my units were in kilograms or tons.

Good Day, i´ve got an WASM crash during my cruise from RCTP to YBBN without doing anything or pressing something, just cruising. Aircraft: A350-900 Simulator: FS2024 Navdata Method: NAVIGRAPH WASM Error: WASM: Error -239 / ffffff11 WASM: ERR_FATAL_FILE_ERROR (-239 / ffffff11) Specs: Intel Core i9-9900K, Nvidia GeForce RTX 4080 Super and 32GB Ram of your system. last autosave.bin

Hello, after I update my a340 and my a350 from 1.0.6-1.0.5 (A340) and 1.1.5-1.1.8 (A350) both aircrafts are static, the copit skreens are not working and there is no way to get these on. On the A350 the engines blades are not spinning and on the A340 the landing gear is alway in. At this time these aircrafts are not usuable for me (also all implementet ini aircrafts in mfs 2024). Thanks, Mr flight sim

Hello everyone! For two consecutive days, I have encountered a situation where the aircraft's LNAV malfunctions and keeps circling repeatedly between the ORAVA and UNSEK waypoints (as shown in the figure). Other pilots have also informed me that they have encountered the same issue. Could the cause of this problem be incorrect LNAV coding or something else? Everything in the aircraft cockpit is normal with no alarms whatsoever— the only issue is that the LNAV is not following the planned route.

The link to support for the TaiModels WSSS version brings me to the iniBuilds forum (I can't find one for them). So hopefully you can help on this issue. Landing on runway 02L at Taimodels WSSS and the ILS is set wrong, bringing me in like this on to the grass: https://ibb.co/hFZGKtws

Directly after the v118 intrasllation and right after the flight is started an annoying sound is present. Can someone identify it, mp3 attached Mats MSFS2020 A350_sound.mp3

Hi All, Can anybody confirm if there is a way to move/slide/remove the pilot seats in the A340? Running a triple monitor setup, to get the correct zoom level you need to move the pilots eye view a little further to the rear and unfortunatly the seat headrest is in the way. In the A350 and the Fenix airbuses the seat can slide backwards, but I don't see a way to do this in the A340? Can anybody confirm if there is a way to make it disappear or slide? Seems odd that iniBuilds would model the toilet flushing sound but not the pilot seats....perhaps thats a sign of the level of professionalism the product is pitched at. Cheers

Hi - Will the iniBuilds Cape Town (FACT) scenery be compatible the Landmarks Cape Town City Pack scenery from Orbx? Thanks

This is an interesting topic for literally nearly all simmers who don't touch the airliners because well we're to young or to old or just didn't do flying, but I would like to know if there have been any changes to flight model for a350 as I still find myself feeling a pitch up jerk as soon as raising the gear which is off putting and finding it a bit hard to control on the roll axis on final. I will add also the aircraft touches down as soon as 5 gets called out this was not present in initial versions. To also add does Ini at all source digital flight data recorder data from real world flights, I think this would actually aid in helping create flight models alongside…

Is this a known issue? This has been the case since a long time. It is only possible to interact with the cdu using a mouse when in VR and not with the vr controllers. When using VR controllers clicks aren't registered on the mcdu. The strange thing is that this works normally on the OIS. Can someone from ini builds please comment on this issue? It's been driving me mad since ages.

Since updating to the latest update for the A350, my cockpit just looks like this all the time... Like is the hud just perma glitched now or bugged?

Hi - Aircraft not visible (Livery SAS latest update), see mage - Positioning aircraft still not working. Why wasn't this fixed. it's a major bug!!! Had to go back to v1.1.6, then aircraft got visible again MSFS2020 Mats p.s. my previous post about this seem to be deleted, please notify me if there is something iInappropriate with this post

this happens in fs24 in a320 and a300 maybe others. most of the time just clicking on efb to do something yellow screen comes down behind it.

Hi, as you see, how can I fix it A350 FS 2024