I moved from the Market Place to Inibuilds today. After downloading from the Inibuilds site and rebooting etc, I loaded up 2024 in the anticipation of doing a flight. However, that wasn't to be.

These are the problems I have encounted while parked at a gate;

• Nothing happens when I turn the two battery switches on. The aircraft is still completely unpowered.

• The strobe lights are flashing while the aircraft is parked, even with no power and all light switches are turn off.

• In the EFB, after clicking on "wheel chokes" the green confirmation appears at the top, but chokes are not visible.

• The throttle levers are stuck in Max Reverse and won't budge.

Is there something I've failed to do? I had no problems at all while the aircraft was with Market Place.

Bruce R

Taken from a post by Harsh on the Synaptic Discord:

"If you're having any issues after switching to the ini Store version of the Synaptic A220, reference the checklist below

1 - Uninstall the MS Marketplace version to avoid any conflicts, and disabled the Marketplace version in the in-game store. We strongly recommend deleting the A220 WASM/work folder as well, when switching to the iniManager version.

2 - Restart your flight, sometimes the sim doesn't load the WASM correctly on initial boot.

3 - Uninstall the CPDLC mod as it's not working with v1.0.7, that will require a community mod update that we don't support or oversee.

4 - Please also ensure you're installing the aircraft with the latest iniManager version (v2.6.0), as we require this version to avoid issues.

5 - Uninstall and reinstall iniManager and the Synaptic A220

We'd like to thank everyone for the amazing support over the past month, happy flying!"

Thank you for getting back. That’s something I missed. I’ll look at it tomorrow.

Bruce R

Have followed ALL of the above instructions with no luck - loads cold & dark. Must I delete the radar map module?

Did not have the CPDLC mod.

Edited 9 hours ago9 hr by Trevor

My apologies - problem solved - I did not realize that I had a 2020 AND a 2024 version streamed. I had only disabled the 2024 version 🤣

10 hours ago, Bruce R said:

I moved from the Market Place to Inibuilds today. After downloading from the Inibuilds site and rebooting etc, I loaded up 2024 in the anticipation of doing a flight. However, that wasn't to be.

These are the problems I have encounted while parked at a gate;

• Nothing happens when I turn the two battery switches on. The aircraft is still completely unpowered.

• The strobe lights are flashing while the aircraft is parked, even with no power and all light switches are turn off.

• In the EFB, after clicking on "wheel chokes" the green confirmation appears at the top, but chokes are not visible.

• The throttle levers are stuck in Max Reverse and won't budge.

Is there something I've failed to do? I had no problems at all while the aircraft was with Market Place.

Bruce R

I have the same issue and I purchased it from inibuilds, I never bought it until today when it came out for direct purchase. I have spent several hours trying to sort it out to no avail. This is for 2020

Edited 5 hours ago5 hr by mwa05

9 hours ago, noisytwit said:

Taken from a post by Harsh on the Synaptic Discord:

"If you're having any issues after switching to the ini Store version of the Synaptic A220, reference the checklist below

1 - Uninstall the MS Marketplace version to avoid any conflicts, and disabled the Marketplace version in the in-game store. We strongly recommend deleting the A220 WASM/work folder as well, when switching to the iniManager version.

2 - Restart your flight, sometimes the sim doesn't load the WASM correctly on initial boot.

3 - Uninstall the CPDLC mod as it's not working with v1.0.7, that will require a community mod update that we don't support or oversee.

4 - Please also ensure you're installing the aircraft with the latest iniManager version (v2.6.0), as we require this version to avoid issues.

5 - Uninstall and reinstall iniManager and the Synaptic A220

We'd like to thank everyone for the amazing support over the past month, happy flying!"

Thank you.

For those migrating (2024), I had 2 A220 folders in the WASM folder. Initially, I deleted only "synaptic-aircraft-a220". Still had the issue. Then, I found and deleted "inibuilds-aircraft-a220" from the same WASM folder. Plane works fine now.

Yep, your issues sound familiar with mine. First it looked okay when I downloaded it last night, but now since I disabled the automatic ground power (switched it back and forth)in the settings all is crazy.