Marcocessna84

@Daniel Landucci Have you tried to use the optimal texture ? there have a lower resolution and might be able to improve the fps? Please see the picture for validation.

@berkkp Normally not, however there are several factors to take into consideration: Weight distribution, Center of gravity, winds and trims. There is so much more but the main ones are the ones mentioned unless I am forgetting something. Try setting trims to -0.4 or more to see if this will allow you to reach your VR,V1 speed. Cheers

@Daniel Landucci Have you tried to use the optimal texture ? there have a lower resolution and might be able to improve the fps? You can download the optimised Texture Resolution Pack on the Inibuidler app.

If you have not calibrated the Hardware in OS and updated it prior that would be of suggestion. Alot of times we think plug and play right of the bat is the way to go. Here are a few links to assist with getting everything properly calibrated ( noted only in MSFS2020 will the calibration not suffice). Hope this helps. 1. https://www.simvol.org/en/articles/tutorials/calibrate-thrustmaster-tca-airbus 2. https://support.thrustmaster.com/en/product/tca-quadrant-airbus-edition-en/ 3.https://support.thrustmaster.com/en/product/tca-quadrant-airbus-edition-en/ 4.https://www.google.com/search?client=opera&hs=u8e&sca_esv=594742070&sxsrf=AM9HkKlITJ2BvGIolwFZi1IGZ6_gQE1dYw:1704027644878&q=Thrustmaster+Airbus+throttle+calibration+MSFS+2020&sa=X&ved=2ahUKEwi0k9fT3bmDAxWuIEQIHaIiBqMQ1QJ6BAhHEAE&biw=1168&bih=900&dpr=1#kpvalbx=_Q2aRZZLGI5TBkPIPk6ms-A4_45

There is a configuration file for the TCA in the Airbus folder. I know there is a way to manually modify it little bit. Someone posted under the A310 info at one point.

@PotatoSalad Sir are you running your sim settings on? Have you tried to run an older version of gpu software? Try rolling it back a few cycles and see if this will eliminate that problem. I am not sure about Nvidia cards but shouldn't there be a settings that prevents screen tear and lagging? So e have stated the 8K texture might be the cause am not sure about it. I don't have those issues.

Just a few more after arrival and walk around.

@bert50 there are a few post on here how to proper callibrate the TCA Quadrant.

@theex0r the settings are under the controller settings top left look for sensitivity. There you can make adjustments to the X,Y axis. That should help with it. Cheers

@pizzamonster try do download the texture directly from the page and install them. Wonder if that might be the reason.

@theex0r have you tried to change your sensitivity settings under your controls? Please remember that. No plane will precisely move slowly and smooth unless you set the sensitivity according to your individual needs. Try that out and let us know how it works. Cheers

@MaxTurso that might be the thermal settings that's activated. There is a particular settings for that. You’re gonna have to google that settings to turn it off. Let me know if you were successfully able to find it and turn it off.

@CharlySeven are you running any programs (add on) parallel to starting the sim? Have you tried to reinstall the A300 newly and see if the same problem persist? I had FS Realistic starting and when cancelling it without proper uninstalling it caused my sim to crash now mind you I have a high end pc. Can you check your event viewer at the next CTD and let us know. Thanks

@scottie2950 are you running any programs (add on) parallel to starting the sim? Have you tried to reinstall the A300 newly and see if the same problem persist? I had FS Realistic starting and when cancelling it without proper uninstalling it caused my sim to crash now mind you I have a high end pc. Can you check your event viewer at the next CTD and let us know. Thanks

So, Turns out since I am using FS Realistic this program has caused my sim to crash when it was not loaded and I had the A300 loading. Not 100% sure if this was or was not the reason. I figured it should be shared just in case anyone else is running it in the backround. Cheers.

Am getting the same problem with UPS /KSDF/ HIGH END PC/ regular settings. Yesterday I had no problems

The cargo model and pax model for me are under to separately listings.

What I did was created a new profile and reassign it to the plane under a new name. If you use the same settings from another plane it will cause that issue. I found that out just by renaming the profile, recalibrate and save under a new name that helped me.

It’s could be a corrupt file there. Have you tried to do a fresh installment of the Add on?

Mate, if your using the same profile for another plane that would be why your reverse thrust is off. In order to eliminate that problem you need to reassign a new profile, rename it and recalibrate it to only the A300 settings. That worked for me.

Hello Captains, I have the TCA Capt set up. What I did to eliminate the problem was under controller settings changed the profile so it was directly assigned and renamed to A300 . This will allow the settings to identify your aircraft and not get it mixed up with another add on such as Fenix or Flybywire . Give that a shot and recalibrate it. Let me know if this resolves your problem.

Hello, I am not part of the team, but I wonder have you updated the Airrac for MSFS2020? What flight plan platform for flights do you use? warm regards