Deleted Account
-
Posts
3422 -
Joined
-
Last visited
-
Days Won
176
Content Type
Profiles
Forums
Downloads
Posts posted by Deleted Account
-
-
Yeah, I can ask them to add a not on the page that it only downloads an installer 🙂
You were able to install the sceneries after all though?
-
It also is possible to completly retract the slats in flight. It is dependant on your AOA as it is in the real aircraft.
-
It wasn't solved because it is not a bug. It is intended to be in that configuration.
-
Heya :]
I asked around a bit and this might help you:
"he needs to make sure he’s installed the ‘common files’ both from inibuilds and also there’s a download (I think) you need on the FSLabs forum. Easiest way to install that is by downloading the FSLabs application" -
These two are not able to be manipulated with any insim command. Do you mean an LVAR?
-
I can put it on the wishlist, but no promises 🙂
-
I'm sorry, which slat issue are we talking about?
-
Heya!
It should be
AN225_MACH_COMMAND (LVAR) (1 = Trigger button) for the orange button and
AN225_AIRSPEED_COMMAND (LVAR) (1 = Trigger button) for the white one 🙂
-
1
-
-
Heya!
Can't confirm that the plane is already loaded when loading in.
The camera is a known issue, albeit a sim limitation. You'll need to set a key binding to "Decrease Cockpit View Height" to move the camera down manually.
-
Heya!
1) Not as a value I think, but there is this little gauge which tells you where the trim currently sits.
2) Nav2 currently isnt working, but it is already on our internal wishlist 🙂
-
On 3/8/2023 at 9:37 AM, No4124485 said:
Ok thanks for the information about that. And I would have another thing. My throttle quadrants are a little flickery and while the throttle lever is no problem if it jitters a bit, the crank for the propeller has big jitters (maybe tue to the ratio of axis input to crank revolutions) and also is permanently in view so it really affects the immersion. Is there a possibility to maybe add some filter so that not every little axis jitter gets translated into immediate movement of the crank? Or maybe to reduce the resulting movement so it does not flicker around 20 degrees or so? I have also seen in in videos on youtube that other people have some flickering in their controller axis and get these jitters of the crank. Or maybe tune the crank so that the entire axis range is covered with one revolution so a small jitter is less noticable.
Heya 🙂
Yeah, I´ve noticed that as well with my x56. I´ll put it onto our wishlist for consideration 🙂
-
Heya!
I´ve put it down for consideration, thanks 🙂
-
It´s a bit weird, because no one on our team can replicate this issue.
Please make a test where your community folder is completly empty except our NZQN, the default NZQN is uninstalled and the rolling cache got deleted. Then report back when the issue still persists.
-
Yes, I can confirm the issue. Will be rectified in a later patch 🙂
-
1
-
-
Heya!
You mean when using the drone cam and looking around the airport? I can't say I can reproduce this issue. Where exactly is it happening?
-
Heya 🙂
Sounds reasonable, I'll put it on our internal wishlist 🙂
-
oooh, I see whats happening here.
Both those sceneries we just download an installer, which then installs the scenery. Normally the Manager should open those installers on its own (maybe you have an UAC flashing in your taskbar that you didn't notice?); but if it does'nt here is the path the Manager downloads those installers to:
C:\Users\<USER>\AppData\Local\iniManager\app-2.1.3\resources\app\temp
The Manager will delete those upon closing, so you'll need to download them again 🙂
-
Heya!
Nothing special to do, you can just install again 🙂
Yes, that should work as well, just need to scan for path in the iniManager and it should detect it 🙂
-
1
-
-
Heya again!
Got an answer now, but you won't like it. It unfortunately isn't possible to do this with our plane 😕 Sorry for the inconvenience this causes.
-
Heya!
You can switch these two switches to disable the nose wheel steering 🙂 Then only the rudder moves.
-
Heya!
On which version of the iniManager are you?
This sounds to me like the Manager didn`t update the path to the folder you gave it. Cause if I understood you correctly, the folder stays empty even with LEIB/EGLL/KSAT installed?
-
Heya!
The FSLabs liveries should be placed in the corresponding folder in C:\Users\XXXX\Documents\Prepar3D v5 Add-ons\FSLabs\SimObjects\Airplanes. If you are trying to find a specific livery try typing out the registration in the vehicle selection menu and it should show up. -
Heya 🙂
I´ll bring it up with the team, thanks for the suggestion 🙂
-
Sounds good, thanks for getting back to me 🙂
AN-124 Ruslan
in Suggestions
Posted
Heya!
Yeah, you are correct, currently there are no plans for the Ruslan. But we will see what the future brings 🙂