pmplayer

I think you have the set the "Auto Import Step Climb" to ON aswell, thats what i have and it worked every time yet.. cheers 😉

Non plane ( airliners ) in MSFS2020 needs 205nm to climb to 33000ft, thats just not realistc - i do not belive a modern AC like the A350 does ?? cheers 😉

Until yet none CTD`s in V.1.1.2, all around no CTD´s now more than a year in MSFS2020. I would check my community and cache files from Nvidia and the Game - i do make a clean about every time something change, driver, updates and so on. Good luck ! cheers 😉

Something seems to happen with that setting ( Auto Derate-CLB ) it was other in the last build.. Had a climb ( A350-1000 ) to 33000ft from Honkong VHHH and this took with around 250000kg 205nm and this was with Auto Derate. So i did this twice than with CLB and had the same NM so my Question, should that be not much faster, i mean 200nm seems not realistic with CLB the plane wasen´t near full ?? cheers 😉

I have this: What does this Coherent GT says ? See no WASM crash error.. cheers 😉

The same, ( i think this was seen in V1.1.0 ) no not yet but i have some i think ? WASM ( V.1.1.1 now ) crashes at flight where i am see my plane away from the flightpln path and so i tried to bring the plane back to path for example with HDG setting, but nothing worked, the HDG did not change and most other i touched also did nothing but Flightsimulator 2020 was still working ? cheers 😉

OK, setting on low fixed this issue but to say i can use "middelway" with all other planes ( Fenix, MAX8, PMDG 737 series, PMDG 777 series for example and so you can see the wingflex feature ) inibuilds should have a look on this i would say, on this A350 it should not happen like this because other planes does work OK.. cheers 😉

Realy ?? This is a shame after so many build updates, where should this go until this plane flies well - a 100 updates more ???????????????? Sorry, have to.. cheers 😉

On newest A350 build ( 1.1 ) At a last flight landing at OMDB ( inibuild ) and traveled to my Gate and there goeing to shot of my engines. After reaching my gate i would goeing to shot of my engines which i did with the two cut off levers at the pedalstal but the engines did not go off so i tried to load a panel save ( APU and or at GPU ) but this didn`t work either - no engine shot down so what.. ?? 🤣 Bug or WASM crash ?? Help..🤪 cheers 😉

By the way: Turbulence in MSFS2020 does not show off - it says "low, middleway,realistic" so i will try low. So yours ( Chris3DX ) should at least have "low" ?? cheers 😉

OK, thanks, i will try the new 1.1 build with Turbulence off and see if the ILS path goes better than.. cheers 😉

OK Thank you, found it in the PREF page and this looks normal now to me.. About the Glideslope, what Turbulence settings are you using ( MSFS2020 ) as far as i know there three different one - Normal, middleway and realistic. I am using middleway and i saw on GL path strong and fast changes from the wind dir so could be better on "normal" but with this setting you see almost no wingflex and thats odd.. cheers 😉

Where can we set this ? Thanks.. cheers 😉

Furthermore I can't believe that such a new airplane needs 150nm at 31000ft altitude (and that with 195.000kg which is almost 100.000 less than max), so I think the climb performance is clearly too weak ! cheers 😉

Hi guys, That said I realy did a lot of flighs with older builds and the Autoland works realy well, but with this new build it dosent work as before ??? The story begins at around 1500 to 1000ft ( plus-minus ) before the landing Airport runway ( that sayed LOC seems fine ) the GS pointer goes down fast and the AP tries to catch the pointer what brings the speed of the plane up high so the plane goes up and down trying to hold GS what ends in a jumping bag and so the plane hits the runway like a stone and you just can`t do nothing if you don`t shut off AP and AT and handle it your self - but that could be the thing from an Autoland !! I did a same flight wtih a saved build 1.0.10 and had a beautful Autoland, so please inibuilds check that code something is wrong or changed somehow so no normal Autoland can be done with the new build.. If anyone has similar experiences with Autoland please post here - thank you ! cheers 😉

OK found thre Problem, it was a start from the Runway and therefor you have to look under the CDU Active - sec init page there you can import the plan and insert them. cheers 😉

Hi all, At my first flight today with the A350 i set up a flightplan at Simbrief, my Simbrief ID is showing in the EFB settings so this should be OK. Over the EFB i could do all what is needed to load the SIMBRIEF Flightplan into, so all was seen, OFP, Sync Simbrief, and so on.. But on my CDU ACTIVE at the init Page my CPNY F-PLN REQUEST was greyed out and so i could not load the PLN into the CDU. I tried serveral times with restart the flight and close the Sim and started new but i had no luck, the request always was greyed out so seems i need some help here. Someone else seeing this or do i forget some settings for that, so a bit confused here.. Any help would be nice !! cheers 🙂

But this Asobo weather Radar is better then none, at least for me.. cheers 😉

I have not seen or hear a loss of ATC Voices.. cheers 😉

So you can use the CDU over network with an Tablet or a Handy. Any chance of that ?? Would be great, i have that for the PMDG777, PMDG737, Leonardo MD82 ect. so a great Funfaktor more in Flightsimulation.. https://www.aviaworx.com/aviacdu cheers 😉

What build Version of the plane ? Do you use the newest V 1.1.2 ? cheers 🤔

Is there coming one soon for the A300-600 ? cheers 😉

Just to reply back, ( i had bad problems from Version 1.0 until to 1.1.0 ) i did three other flights ( 3 to 5h ) and all oft them went well, seems pretty stable now with V.1.1.1 ! cheers 😉

And on the last yards to the runway the LOC pointer move away to the right and the plane try to follow this pointer and steers away, you have to shut down fast the AP and do a hand fly landing, hopefully they look at this problem.. cheers 😉

Hi folks, I would also like to mention my last experience of four flights (with V.1.1.1) here because I have never been able to finish four flights in a row without a crash. The first flight was about 3 hours, flight 2 and 3 were about 4 hours and the longest was today from PANC to RKSI with 8 hours 20 minutes. I had 3 flights with version V1.1.0 and all with a total crash, so I would like to mention that the update with this version seems to have had a very positive effect on my case - I can only say keep it up Inibuilds, I am very happy to finally be able to fly from A to B without completely failing. Only the really big bugs have been taken into account here, not the minor ones, just to clarify. OK to be clear, 4 flights are not yet the world but now you can hope... But i am a happy camper today, I thought already this would never be happen like this for me !! cheers 😉