Other

I saw the livestream from A330 Driver where he talked about microstutters. Therefore, I already had a bad feeling buying the A220. But I thought "hey, how bad could it be?" Boy, oh boy - was I naive: The A220 is not usable. At all. It is as simply as that. The stutters and lags are so severe, it is beyond describable. In the ITA Airways livery in Linate (not even. a handcrafted airport), I had frame rates that feel like single digits. Low single digits. Guys, honestly. How can you release a addon in this state? Come on! You didn´t even test it ONCE on Xbox, did you? Or you did and simply do not care? I honestly do not know what option would be worse ... It would have b…

Hello. Is there a proper way to update this aircraft? I spent 1 hour going through the loops with Microsoft MP, it was showing update available, so I updated. Then it says click to install. I installed. Then it says Update Available again. It was an endless loop. I ended up uninstalling and reinstalling the aircraft. Any guidance would be helpful!

Since I bought this plane I still haven't been able to finalise a flight, this is incredible! I spent more than €70 practically unnecessarily. Let me explain, every time I start the descent and the approach the plane starts to jerk, until the simulator and the pc are completely blocked. I have a very powerful setting, with an RTX4090! I've never had problems with any game or airplane, but this one really doesn't want to turn! What should I do? Can I ask for a refund? Thank you

When tune ILS freq always is 360 on course LOC. Trying with native and navigraph database. Attached sshots from LEMD approach 18R

in my library. a220 version is 1.0.1 on aircraft EFB. version shows 1.0.0 Is it correct? I purchase a220 after hotfix release.

I flew the A220 fine when it first released, recently whenever I go above 68% N1 the autothrottle disconnects and can only be re-engaged after going back low that figure.

On Xbox,each time I press B on my controller (either after manipulating a switch or decreasing throttle) all the DU flicker for 1 sec with a stutter. It's very weird. I attached a video. Tested in a vanilla sim with just synaptic and liveries enabled on 2024. I noted it happens on PC as well. https://drive.google.com/file/d/1io7cLXzoESh9A4-cTyAlSkbvZ4UaPPi0/view?usp=drivesdk

I’ve just bought a gift card for the inibuilds store and realised the a220 isn’t on there. pls can I get a refund, bit of a shame it’s all been promoted through inibuilds yet not even sold on the website, yes it’s my fault for assuming but surely it should be on the inimanger!

Hello, I am trying to get my voice out there about this problem that really bugs me. Something I love on the Fenix A320 family aircraft is going through some rough air/storms and watching the plane fight its way through it, watching and feeling the wingtips of those aircraft violently jar around as we travel through rough weather. I absolutely love this A220 as it opens up a whole new network of routes to try on an amazing aircraft, but unfortunately, it becomes very stale with the wingtips just gliding so slowly and predictably through rough air, there is no sense of chaos the wingtips are very solid and move slowly and unrealistically. I would love for Synaptic simulati…

There seems to be an issue with the A220 not being read by FSUPIC/APL. You can see the aircraft moving but it appears the engine status doesn't transmit to APL properly, so you never leave pre-flight even if you're in the air.

Hi guys, I can't configure Honeycomb Bravo for Max Reverse... having the reverse buttons I managed (axis + button) to make only the Idle Reverse work but not the Max Reverse... can you help me? Thanks

Trying to turn on strobes and landong lights using keybinds to my hardware. Works on the other planes I fly but not in the A220. Is there some a special setup?

So for some reason the a220 is not responding to my pitch inputs? All the other aircraft are completely fin with my control preset but when I try out the a220 is suddenly decides to not listen, only found this out during takeoff and ending up going straight into a tree since I couldn't pitch up.

I'm not sure if I'm doing things wrong but first. I'm trying to fly into LSZH. The FMS won't display the ILS app for none of the runways. Then when I try manually try to add the ILS waypoints into the flight plan. The FMS keeps failing on me. Making me have to restart the flight. I've downloaded the gsx profile for the plane but it won't load no fuel to the plane when requested, no passengers too are loaded. Am I doing something wrong here or is this plane broken?

Have flown the A220 on four flights now, and on three of them, long after takeoff and cleanup, I get the MSFS system malfunction pops up on the screen. On this last flight it happened later in the cruise portion, and my ACARS system for my airline doesn't pick up on the flaps being used at all. On Descent, the slats will deploy but the flaps will not. After landing, the visual of the aircraft shows the flaps fully deployed on the exterior model, but inside the flight deck, it shows fully retracted. Hardware is all Virpil and no issues show up in the synoptic pages. Any help would be appreciated as it's causing me some issues on landing.

I see a lot of posts here but no one seems to be reading them. Is this forum being monitored by the team/is INI passing these issues on to them?

I've been trying to get my flight plan to import and no matter what I do it just gets stuck on pending. I've let it sit up to a half hour before to see if it'll eventually go and it won't. I wantched the tutorial on a330 drivers channel to make sure I wasn't doing anything weird. I'm following his steps and this still happens. Oddly, I am able to import my flight plan to my EFB with no problems, using the exact same USER ID as is pictured here. Perhaps I'm doing something wrong? I am so confused, I've been trying to figure it out since I bought the craft yesterday (off the MSFS store) with no luck.

After installing A220 v1.0.1 and the terrain map server data, last night 30 Jul 26, I tried to load the FSLabs A321neo. A321neo did not load and msfs 2024 crashed to desktop. I cleaned the A321neo WASM. Then it loaded. I then chose to manually start the A220 terrain map server data, lo res 400. But after loading the A220, in the MAP, the terrain didn't came into view, map is black. It appears to me that the "terrain map server data" is conflicting with FSLabs A321neo. Please help. Regards, Haseen Ahmad Dhaka [VGHS], Bangladesh.

Hi guys, First off congrats on the launch. It's a good airplane with plenty of potential to be one of the greatest in systems depth. Thank goodness I'm not having hits on performance like others, hope stays that way. Now I'm having a problem with RWY18 at EDDF not showing up for DEP, and at LSZH any STAR selected all rwys disappear from the right column! Initially they are there, selecting STAR they're gone, and even if I select first the rwy nothing happens. I'm using Navigraph database (updated through FMS), token active (confirmed at EFB) and payware scenery (both). Yesterday I made YMX-CPH and CPH-ZAG with no troubles with selection of DEP or ARR. Keep good work. Than…

I have completed three landings of the A220. Two out of my three landings have had the same bug. After landing and slowing to approximately 30-50 knots on the runway, the aircraft suddenly flips up about 200ft into the air spinning around until it falls to the ground and crashes. This is at two different airports (Canberra and Olbia). Photos attached of second time it happened. Running the latest version on marketplace. Neither landing has used reverse thrust, and it sounded as though the flaps were automatically retracting.

Got a bunch of warnings after a prolonged time on the ground, prepping a flight LSGG-LEPA Have following indications: DUAL ADS FAIL, L ENGINE FAULT, CB TRIP, AT FAIL, DMC 2B FAIL, DMC 1B FAIL. Do not understand why and how to solve. Went ahead and got airborne (I know I shouldnt), unable to engage AT

hello, sorry for the question but from where do i update to latest version ? i see no update option in msfs 2024, thanks

HELLO, if i select vr with the a220 msfs suddenly crash.......any way to fix it please? well, i tried again, it happens not only with the 220 but also with others a/c, just crash to desktop

Hi, I'm getting a slight pulling to the left when taxing. I have a Thrustmaster TPR but mainly use my WinCtrl URSA Minor for steering. I believe I have everything dialed in? Any info would be greatly appreciated. Great product! Thank you.

Hello, the current input documentation lists: BRAKES Applies brakes; ramps the commanded brake pressure up over time while held/repeated, and releases it back down once no longer pressed. BRAKES_LEFT Applies the left brake; in this implementation it ramps the same shared commanded brake pressure as BRAKES. BRAKES_RIGHT Applies the right brake; in this implementation it ramps the same shared commanded brake pressure as BRAKES. This seems designed for buttons rather than proportional toe-brake axes. Although the real A220 uses electrically actuated brake-by-wire, pedal operation should still be similar to a conventional system: proportional and independently controllable on…