Systems

Good morning, I hope this is the right section, my name is David and I'm new, I wanted to ask, is there a way to have the A400M FMS on a Tablet? I tried to install spacedesk and with the Auto popup Manager MSFS 2024 tool make the FMS appear on the tablet and also activate the Touch functionality via the Manager, but when I go to interact on the Tablet nothing happens, the Touch functionality doesn't work. Do you know how I can do it? Best Regards 😊

# ISSUE DESCRIPTION Description of the issue: A400M cannot be started from cold and dark. Batteries are on when i enter the cockpit. In the EFB: Selecting Cold and Dark does not turn off the batteries. [PC Only] Did you remove all your community mods/add-ons? If yes, are you still experiencing the issue? Yes # FREQUENCY OF ISSUE How often does this occur for you (Example: Just once, every time on sim load, intermittently)? Every time i load the airplane no matter where # REPRODUCTION STEPS Please list clear steps you took in order to help our test team reproduce the same issue: 1. Load the aircraft at any airfield 2. Enter t…

# ISSUE DESCRIPTION Description of the issue: When the NAV light is activated, you have a large cone of light at the rear, more like a floodlight. [PC Only] Did you remove all your community mods/add-ons? If yes, are you still experiencing the issue? Yes # FREQUENCY OF ISSUE How often does this occur for you (Example: Just once, every time on sim load, intermittently)? Every time i load the airplane no matter where # REPRODUCTION STEPS Please list clear steps you took in order to help our test team reproduce the same issue: 1. Load the aircraft at any airfield or in the Air 2. Enter the cockpit 3. Activate the NAV light switch…

# ISSUE DESCRIPTION Description of the issue: The chocks & GPU are still not visible since the SU1 update i checked the version of the airplane via the dev mode my package version is v0.0.18 [PC Only] Did you remove all your community mods/add-ons? If yes, are you still experiencing the issue? Yes # FREQUENCY OF ISSUE How often does this occur for you (Example: Just once, every time on sim load, intermittently)? Every time i load the airplane no matter where # REPRODUCTION STEPS Please list clear steps you took in order to help our test team reproduce the same issue: 1. Load the aircraft at any airfield 2. Go around the airp…

I have set the EFB to use imperial units, but the fuel & load page of the FMS requires input in metric units. Does the real plane not support imperial units at all, or is there an FMS setting somewhere that will change the units?

During the start sequence, engine master lever on feather the propellers must remain in feather and change position when switching to « RUN » and propellers noise increase. When engines starting, the engines start too quickly compared to the real plane the same thing for the engine cut, the propellers stop turning too fast.

I would like to enter a flight plan containing user waypoints defined by lat/lon coordinates into the A400M FMS. I found out that the corresponding page for user waypoints is not available under Data - Waypoints menu of the FMS. So my first question would be, is this a planned feature for a future update? As a workaround, is it possible to use stored flight plans from a file, like it is with the older iniBuilds Airbusses, where the flight plan file could be placed into a specific folder location? Was unable to find any information about this for the A400M. I know that it is possible to import a flight plan with user defined waypoints from SimBrief, but unfo…

Does the aircraft have CPDLC?

Hi! The A400M is quite a cool Aircraft. Thanks for bringing it to MSFS2024! Is there a way to show the Bearing and DME Information of tuned VOR Stations (NAV 1+2) on the Navigation Display? On "older" Airbus Aircraft you used those small switches on the EFIS Control Panel, but I couldn't find them in the A400M... Hope someone can help. regards, Benni T.

Hello i am unabel to get the lights on....

When switching, with AP engaged, from Heading to Track Mode (HDG/TRK Button), the Aircraft does not follow the selected track, but just seems to keep whatever bank it had previously.

When starting and stopping the engines, the propeller begin/stop spinning almost instantly, but YouTube videos will show them having much more inertia.

I've noticed the FD on the HUD does not any lateral guidance like the PFD does. Its making the HUD feel useless and I end up flying without it majority of the time and almost impossible to follow an ILS approach using it. Here is an example. HUD --- Notice how there is only a single horizonal line to help with vertical guidance but nothing to show and help with lateral guidance PFD --- Showing both vertical and lateral guidance with the help of the small circle in the center, this is not shown on the HUD Here is a photo from the real aircraft showing the HUD has both lateral and vertical guidance as it is certified t…

At adverse temperatures, the engines and autopilot are switched off.

Hello. I am cannot get the reverse thrust to calibrate correctly with my TCA Airbus throttles on Xbox. I have tried all the calibration steps and troubleshooting steps on the FAQ but nothing is working. The green bars in the efb show the throttles in reverse position but moving the throttles to the full reverse position does nothing. Is there another workaround available?

I may have discovered a potential bug in the A400M where the entire sim freezes as soon as the plane follows a glide path: Several flights were performed from ETNW to EDDS. During the flight, holding and co. everything was fine. But as soon as the AP follows the localizer, the entire sim freezes and finally crashes after several minutes. It doesn't matter whether I follow the glide path via autopilot, CAT3 autoland or manually, it always crashes in this state. This crash can only be reproduced with the A400M. With the standard A320/A330 and the Fenix A320 I was able to fly in EDDS without a crash in the glideslope.

Hi, On the ENRTE page in the FMC there is a distance to TOD which is correct but there's a time next to it and it shows current UTC instead of time of TOD.

I'm really impressed by this aircraft. But... I'm stuck on engine startup process under arctic conditions, OAT -25C. I cannot get the engines to reach AVAIL stage. Is there a particular startup process to follow under these conditions?

Have tried Dim etc but still the same.. Is this a bug or a stream issuse.

Some settings in here for PWR RATING I can't quite understand what it is and/or what it's used for LNC, MIL OPS and LFI is what I'm lost with

i have question about hud colors sometimes its white and sometimes its green is there button to change it or is it only automatic ?

Hello. Is the AoB (Angle of bank) Knob functional? Or does just move and doing nothing? This seems my experience so far. But if it is implemented where do I see the indication of the Bank angle been switched? And do you guys plan to provide a more indepht manual? The current one is nice but more for "casual" players. It would be nice to lern more about the currently working systems in the aircraft and how they affect the aircraft?! Thanks so far

No addons installed, just doing a local VFR flight around LEZL. It is the second time it happend, the first was right after setting up a VOR approach on the FMS. All screens will freeze, engines would stop responding followed by a crash into the terrain

I’ve noticed that when moving the MCDU screen to an external monitor that is not possible to interact with it. In other words, even though the mouse cursor is over the screen, the yellow X is not displayed as expected.

1.) The pedestal joystick of the electronic checklist does not work, it is not possible to scroll up/down to select a checklist. 2.) SID/STAR values are missing in the MFD. For example, there are no values for EDDS (Stuttgart) in both SID and STAR.