General Discussion
Thread for general and off-topic discussions.
472 topics in this forum
-
Hello iniBuilds Team, After updating the A350 to version 1.1.8, I noticed an issue on the VSD during the final approach. The aircraft symbol draws a straight line toward the end of the runway instead of following the expected path. Could you please confirm whether this behavior is intentional or if it is a known bug? Thank you for your support.
-
- 0 replies
- 444 views
- 1 follower
-
-
Yesterday I tried doing a flight from OTHH to KLAX in the A35K. I turned in the electrical power of my plane. I then opened GSX. It said "simbrief OK" but then only loaded one passenger. I restarted couatl to quit GSX because it didnt seem to work. In the OIS I hit LOAD FUEL and set it to instand and the fuel loaded correctly. When I hit LOAD ZFW i could tell the airplane moved slightly but the OIS perf page when I automatically got the weights AND in the fmc when I automatically set them were like around 150 tons, I forget exaxt number, but it was equal to the zero fuel weight, meaning the ZFW didnt load correctly. I also made sure all my units were in kilograms or tons.
-
- 0 replies
- 830 views
- 1 follower
-
-
Good Day, i´ve got an WASM crash during my cruise from RCTP to YBBN without doing anything or pressing something, just cruising. Aircraft: A350-900 Simulator: FS2024 Navdata Method: NAVIGRAPH WASM Error: WASM: Error -239 / ffffff11 WASM: ERR_FATAL_FILE_ERROR (-239 / ffffff11) Specs: Intel Core i9-9900K, Nvidia GeForce RTX 4080 Super and 32GB Ram of your system. last autosave.bin
-
- 1 reply
- 408 views
- 1 follower
-
-
Hello, after I update my a340 and my a350 from 1.0.6-1.0.5 (A340) and 1.1.5-1.1.8 (A350) both aircrafts are static, the copit skreens are not working and there is no way to get these on. On the A350 the engines blades are not spinning and on the A340 the landing gear is alway in. At this time these aircrafts are not usuable for me (also all implementet ini aircrafts in mfs 2024). Thanks, Mr flight sim
-
-
- 1 reply
- 836 views
-
-
Hello everyone! For two consecutive days, I have encountered a situation where the aircraft's LNAV malfunctions and keeps circling repeatedly between the ORAVA and UNSEK waypoints (as shown in the figure). Other pilots have also informed me that they have encountered the same issue. Could the cause of this problem be incorrect LNAV coding or something else? Everything in the aircraft cockpit is normal with no alarms whatsoever— the only issue is that the LNAV is not following the planned route.
-
- 4 replies
- 731 views
- 1 follower
-
-
The link to support for the TaiModels WSSS version brings me to the iniBuilds forum (I can't find one for them). So hopefully you can help on this issue. Landing on runway 02L at Taimodels WSSS and the ILS is set wrong, bringing me in like this on to the grass: https://ibb.co/hFZGKtws
-
- 0 replies
- 538 views
-
-
Directly after the v118 intrasllation and right after the flight is started an annoying sound is present. Can someone identify it, mp3 attached Mats MSFS2020 A350_sound.mp3
-
- 0 replies
- 380 views
-
-
Hi All, Can anybody confirm if there is a way to move/slide/remove the pilot seats in the A340? Running a triple monitor setup, to get the correct zoom level you need to move the pilots eye view a little further to the rear and unfortunatly the seat headrest is in the way. In the A350 and the Fenix airbuses the seat can slide backwards, but I don't see a way to do this in the A340? Can anybody confirm if there is a way to make it disappear or slide? Seems odd that iniBuilds would model the toilet flushing sound but not the pilot seats....perhaps thats a sign of the level of professionalism the product is pitched at. Cheers
-
- 0 replies
- 393 views
-
-
Hi - Will the iniBuilds Cape Town (FACT) scenery be compatible the Landmarks Cape Town City Pack scenery from Orbx? Thanks
-
-
- 7 replies
- 1.8k views
- 2 followers
-
-
This is an interesting topic for literally nearly all simmers who don't touch the airliners because well we're to young or to old or just didn't do flying, but I would like to know if there have been any changes to flight model for a350 as I still find myself feeling a pitch up jerk as soon as raising the gear which is off putting and finding it a bit hard to control on the roll axis on final. I will add also the aircraft touches down as soon as 5 gets called out this was not present in initial versions. To also add does Ini at all source digital flight data recorder data from real world flights, I think this would actually aid in helping create flight models alongside…
-
- 0 replies
- 353 views
-
-
Is this a known issue? This has been the case since a long time. It is only possible to interact with the cdu using a mouse when in VR and not with the vr controllers. When using VR controllers clicks aren't registered on the mcdu. The strange thing is that this works normally on the OIS. Can someone from ini builds please comment on this issue? It's been driving me mad since ages.
-
- 0 replies
- 566 views
- 2 followers
-
-
Since updating to the latest update for the A350, my cockpit just looks like this all the time... Like is the hud just perma glitched now or bugged?
-
- 4 replies
- 988 views
-
-
Hi - Aircraft not visible (Livery SAS latest update), see mage - Positioning aircraft still not working. Why wasn't this fixed. it's a major bug!!! Had to go back to v1.1.6, then aircraft got visible again MSFS2020 Mats p.s. my previous post about this seem to be deleted, please notify me if there is something iInappropriate with this post
-
- 13 replies
- 4.5k views
- 2 followers
-
-
this happens in fs24 in a320 and a300 maybe others. most of the time just clicking on efb to do something yellow screen comes down behind it.
-
-
- 3 replies
- 1.1k views
-
-
Hi, as you see, how can I fix it A350 FS 2024
-
- 2 replies
- 400 views
- 1 follower
-
-
The rotation of the A330's engine blades is blurry,like this picture. No DLSS,Only use TAA. Please repair,Thank you so much:)
-
- 1 reply
- 609 views
- 1 follower
-
-
Vol OK for the first time as uptdate 1.1.7. Fly BIKT to EGLL.
-
- 0 replies
- 333 views
-
-
Wondered if anyone could help me. Ive loaded up my flight plan on the main menu and when it loads directly onto the runway, nothing works on the plane. It seems like it’s turned off. The EFB doesn’t load, inside of the aircraft is quiet, none of the engines seem to be spinning. Prior to the update, this all worked perfectly fine but I’m not sure what’s happened. I’ve tried the start up procedure as well at the gates and that doesn’t seem to be working. Any workarounds? This is on Xbox btw.
-
- 2 replies
- 550 views
-
-
Hi all, I’d like to make a case for a new, high‑fidelity rendition of Vienna International Airport (LOWW) specifically tailored to MSFS 2024. MSFS 2024 Native Version The currently available payware version was designed and optimized primarily for MSFS 2020. While it still works in 2024, it doesn’t fully leverage the new sim’s features, performance improvements, and visual upgrades. A fresh version could take advantage of updated lighting, ground handling, jetway behavior, and potentially new SDK options, delivering a smoother and more immersive experience. Terminal 3 expansion and outdated layout https://viennaairport.com/en/business__partne…
-
- 0 replies
- 1.8k views
-
-
Is there a cabin paintkit available for the A350 V1.1.8? Ever since the release of V1.1.7, the previous cabin seat textures have become unusable due to model changes. I’m currently struggling to adapt those old textures to fit the latest version, but I’m facing difficulties. Is there any good method to make them compatible, or perhaps a more complete set of paintkits that I could use?
-
- 1 reply
- 983 views
- 1 follower
-
-
Love the new EGCC! But I've noticed that aircraft are using the the wrong runways. In real life they'll tend to arrive on 23R and depart 23L, or arrive on 05R and depart 05L, this avoids the awkward backtrack on 23L/05R. In the sim, it's the other way around, they're arriving on 23L and having to turn around and backtrack. Additionally (although I think this is probably beyond the scope of FS2024) the far runway is closed for several hours each day and late at night, with only 05L/23R in use. https://www.manchesterairport.co.uk/community/dual-runway-use/ https://www.tasmanchester.com/runwayoperatinghours
-
- 0 replies
- 472 views
-
-
After a number of attempts with the Fenix A320 and the Inibuilds A350, the Jetways at EGCC are not connecting correctly. They always end up a few feet away from the aircraft. GSX Pro is up to date for 2024 and the supplied GSX profile is in its correct folder, (both files). I have tried to locate and disable any conflicting EGCC sceneries in My Library but I cannot find one. Both versions of the above aircraft are up to date. Running the latest SU4 update as well. Any suggestions? JazzBassman
-
- 0 replies
- 488 views
-
-
In two days, it will have been a year since Inibuilds posted a teaser on their Instagram story, hinting that they were working on a Lockheed L-1011 Tristar. In the teaser, they said it could be released this year. However, in the past year, we have not received a single update on the plane. Does this lack of updates mean that the Tristar has been delayed until possibly next year? Thank you.
-
-
- 8 replies
- 2k views
- 3 followers
-
-
Hello! Has anyone been having lighting issues with the inibuilds a320neo? When I want to turn on the flight deck lights to dim or bright, it doesn't light up. Same goes to the panel flood light, they don't light up either. I would like some help because I really want to be back flying the neo in the sim. System: Microsoft Flight Simulator 2020 Pc Thanks.
-
-
- 3 replies
- 2.6k views
-
-
Just purchased the, "KCRW" airport by, Xometry. From the Inibuilds store, and installed using the "inimanager". I checked my custom scenery folder and it is indeed there. I loaded into XP, closed it, opened .ini file, made sure to put new airport in correct order, relaunched XP12, loaded my aircraft into KCRW and had nothing but grass and a few random planes. Had the, couldn't load custom scenery KCRW because missing required libraries, error. Checked log file and scenery requirements and neither tells me which libraries I need. Can add the log file when I get back to my PC. Anyone have an idea of what could be wrong? Log.txt
-
- 0 replies
- 340 views
- 1 follower
-