LencoNL Posted November 13, 2022 Share Posted November 13, 2022 Hi, i have a problem with the A310 and cant figure out whats going on. Everything is fine at take off and climb, when reaching FL100 speed it going up from 250kt to somewhere around 300kt and at that moment the plane stops following the flightplan, it cant make any turn. When i take the plane over from profile to HDG SEL and change the HDG the plane banks a little around 5 degrees and turns only for about 10 degrees to the left or right on the heading then starts leveling off to normal. Already re-installed the A310 and enhanced addon. Any idea? Link to comment Share on other sites More sharing options...
Deleted Account Posted November 13, 2022 Share Posted November 13, 2022 Heya, can you please tell me which departure this is? Or is it on every departure for you? Link to comment Share on other sites More sharing options...
LencoNL Posted November 13, 2022 Author Share Posted November 13, 2022 (edited) EHAM runway 24 EHAM/24 RENDI1S EDUPO Z739 MISGO DCT DIXAT DCT PODIP DCT BOMBI T104 ROKIL ROKIL1A EDDM/08L After waypoint IVLUT its a turn to the right, at that point it keeps going straight forwards. Even when i do a DIR TO the next waypoint the plane dont go to it. Edited November 13, 2022 by LencoNL Link to comment Share on other sites More sharing options...
LencoNL Posted November 13, 2022 Author Share Posted November 13, 2022 Even when i just take off without flightplan, after reaching FL100 and picking up speed i cant turn it anymore on the HDG SEL knop. Link to comment Share on other sites More sharing options...
Deleted Account Posted November 13, 2022 Share Posted November 13, 2022 I am sorry, I can´t reproduce this. I reach 10000ft by EH026, and afterwards the plane starts it left turn towards IVLUT, from where it follows the flightplan. Can you please record a video showing the departure until it doesn´t follow the FPL anymore? Link to comment Share on other sites More sharing options...
LencoNL Posted November 13, 2022 Author Share Posted November 13, 2022 I recorded the departure, start at the gate, use simbrief and autochecklist to start up the plane. Taxi to the runway and take off. After reaching IVLUT the problem starts. Link to comment Share on other sites More sharing options...
Wingtip2802 Posted November 13, 2022 Share Posted November 13, 2022 I have the exact same problem. Can't figure out what it causes that behavior. Link to comment Share on other sites More sharing options...
Deleted Account Posted November 13, 2022 Share Posted November 13, 2022 Heya, so I tried to replicate it with the auto checklist and the same how you did it in the video - but I unfortunately still cant reproduce this. I put our testing team on it to see if they can reproduce this, I´ll report back once I have their findings. Link to comment Share on other sites More sharing options...
LencoNL Posted November 13, 2022 Author Share Posted November 13, 2022 Okay, for the test i just did a take off with the Asobo A320 without flightplan but that one will go everywhere in HDG mode. I have FBW A320 and Headwind 330-900 installed. Link to comment Share on other sites More sharing options...
Wingtip2802 Posted November 13, 2022 Share Posted November 13, 2022 Question, did you update the 310 in the Marketplace? I did but no time to check if it will fix the issue. Link to comment Share on other sites More sharing options...
LencoNL Posted November 13, 2022 Author Share Posted November 13, 2022 Yes i installed the Enhanced mod for A310 from the marketplace for better textures. Link to comment Share on other sites More sharing options...
ZoomerWaffen Posted November 14, 2022 Share Posted November 14, 2022 After takeoff the autopilot works fine for the first few waypoints but then it just stops working and has me flying in a straight line and won't follow the flight plan. Is there something I need to do to keep it following the path or is it a bug? I love the plane but this is ruining it for me. Link to comment Share on other sites More sharing options...
Wingtip2802 Posted November 14, 2022 Share Posted November 14, 2022 OK, I was hoping that will fix it. Link to comment Share on other sites More sharing options...
kev_in_cyp Posted November 14, 2022 Share Posted November 14, 2022 Hello, I also have the same problem. Have tried several flights and follows for a few waypoints and then stops. The FD moves towards the direction of the turn, and the ailerons are slightly raised on the side that the turn should be happening, but no turn. Sometimes Heading select will still work, and sometimes this also remains unresponsive. Link to comment Share on other sites More sharing options...
Goliv91 Posted November 14, 2022 Share Posted November 14, 2022 Exactly same bug here ! Enhanced version installed. Takeoff from MMMX with UKUN2A departure. After MX811, go straight and never turn to MX814. The only way to fly is manually as Hdg and Nav stop working... Link to comment Share on other sites More sharing options...
Wingtip2802 Posted November 14, 2022 Share Posted November 14, 2022 Gentleman, I did try it again today and I noticed the A/P starts acting up at the end point of a SID. I startet from EDDB RWY 07R with the LUROS1Q Dept. That's a long SID and 3/4 of the distance I reached 20.000ft and all was normal. Exactly when I reached the last waypoint of the SID (LUROS) that was the last turn the A/P made. After that the plane did not respond to any HDG input nor to the programmed flight plan. So it seams he flies the SID's perfectly but has problems with the flight plan. This time I entered the F/P via Simbrief but it does not make any difference, the very first flight I made with the 310 I entered the F/P manually. Link to comment Share on other sites More sharing options...
Lukacsa76 Posted November 14, 2022 Share Posted November 14, 2022 Same issue,here. Vertical FD ok but the lateral FD is not followed by AP neither in NAV or HDG mode. Link to comment Share on other sites More sharing options...
DanTrawn Posted November 14, 2022 Share Posted November 14, 2022 Hello, I recently experienced a problem with the new A310 for the MSFS, where after takeoff there are no problems but as I pass some altitude the plane just wont follow the flight director anymore. Is there a solution for this(maybe Im doing something wrong?)? Or does someone have this problem too? Link to comment Share on other sites More sharing options...
Wingtip2802 Posted November 14, 2022 Share Posted November 14, 2022 2 hours ago, Wingtip2802 said: Gentleman, I did try it again today and I noticed the A/P starts acting up at the end point of a SID. I startet from EDDB RWY 07R with the LUROS1Q Dept. That's a long SID and 3/4 of the distance I reached 20.000ft and all was normal. Exactly when I reached the last waypoint of the SID (LUROS) that was the last turn the A/P made. After that the plane did not respond to any HDG input nor to the programmed flight plan. So it seams he flies the SID's perfectly but has problems with the flight plan. This time I entered the F/P via Simbrief but it does not make any difference, the very first flight I made with the 310 I entered the F/P manually. 1 Link to comment Share on other sites More sharing options...
Deleted Account Posted November 14, 2022 Share Posted November 14, 2022 Heya, I merged another topic into this one, to collect everyone having this issue into one place. So far we are unfortunately unable to reproduce this. I will also try the new departures pointed out and see what happens there. I´ll keep y'all posted 🙂 1 Link to comment Share on other sites More sharing options...
Ells Posted November 14, 2022 Share Posted November 14, 2022 I've been testing this as well this morning and can't reproduce. Simbrief selects RENDI2S for me (not 1S) but even so we still need to manually enter it in the FMC, which it looks like you did as 2S is the only option in the FMC. I've tried on PC with cold and dark, runway start and on my Xbox as well runway start and every time it turns right at IVLUT. It's clear from your video that it carried on, however we can't produce it. Still looking into it though. Link to comment Share on other sites More sharing options...
tnsnemesis Posted November 14, 2022 Share Posted November 14, 2022 I have the A310 in xplane 11 and its flys well and follows the nav points well.But my A310 in MSFS2020 wont follow the nav points at all Link to comment Share on other sites More sharing options...
DanTrawn Posted November 14, 2022 Share Posted November 14, 2022 So it seems like its a problem from Ini‘s side right? well at least its a known issue and Im nit alone! thanks for your answers😄 1 Link to comment Share on other sites More sharing options...
RedBenny Posted November 14, 2022 Share Posted November 14, 2022 I’m also experiencing this issue on Xbox and have noticed that a blue “BPK” and “089” appear just before the aircraft goes off course. This happens at second waypoint on SID. Link to comment Share on other sites More sharing options...
DanTrawn Posted November 14, 2022 Share Posted November 14, 2022 Is this in the UK? If yes then its just the Brookmans Park VOR so shouldnt be anything to worry about. Link to comment Share on other sites More sharing options...
Recommended Posts