Sorry, @spottersim . I just have time to try the Magenta Dot just know.

In the picture below, I can confirm that the Magenta Dot is there, as long as the Speed Limit is THERE.

As you can see, the Magenta Dot P/W is there, placed and ready to be hit. So it is properly simulated during climb and descend.

---

But for @iniKyle , like I said on the post above, there's a problem whenever we select speed, the Magenta Dot P/W is lost, see the pictures below:

On PFD, the Magenta Dot IS THERE on the Speed Tape, but it is LOST when we do Selected Speed, so the sequencing IS THE PROBLEM now.

Even after selecting Managed Speed, the Magenta Dot P/W STILL LOST eventhough it hasn't hit the FL100 threshold OR Climbing after level-off. And that caused the Managed Climb feature was also lost and revert to OpenClimb mode due to CRZ ALT on CDU is lost (required to reentry the CRZ ALT because of that).

BTW, I am using the V1.0.7 as for references.

Edited yesterday at 02:18 AM1 day by OxkyGThaib

7 hours ago, OxkyGThaib said:

Sorry, @spottersim . I just have time to try the Magenta Dot just know.

In the picture below, I can confirm that the Magenta Dot is there, as long as the Speed Limit is THERE.

As you can see, the Magenta Dot P/W is there, placed and ready to be hit. So it is properly simulated during climb and descend.

---

But for @iniKyle , like I said on the post above, there's a problem whenever we select speed, the Magenta Dot P/W is lost, see the pictures below:

On PFD, the Magenta Dot IS THERE on the Speed Tape, but it is LOST when we do Selected Speed, so the sequencing IS THE PROBLEM now.

Even after selecting Managed Speed, the Magenta Dot P/W STILL LOST eventhough it hasn't hit the FL100 threshold OR Climbing after level-off. And that caused the Managed Climb feature was also lost and revert to OpenClimb mode due to CRZ ALT on CDU is lost (required to reentry the CRZ ALT because of that).

BTW, I am using the V1.0.7 as for references.

I was referring to the situation in which there is no magenta dot at a waypoint with a speed restriction below the LIM SPD, as shown in the videos I attached.

On 11/7/2026 at 4:48 PM, spottersim said:

It works in the A350, but does not show in the A380

(51:31)

IT IS SIMULATED, sir @spottersim . Both Climb Phase and Descend Phase.

Like I told you before ^{(If you read all my previous post)}. As I use V 1.0.7 now, it is simulated as long as you put SPD LIM on the Speed Constraint Page (e.g 250kt/10.000 or whatever speed and altitude you like).

Please, I encourage you to check the SPD LIM Page. Otherwise, you might have be delete the limit.