Issues found in v1.2.5 update

[Yon]

Hi everyone,

I’ve just updated to v1.2.5 and completed a few flights. I noticed several issues that seem to be new or persisting. I would appreciate it if these could be fixed in the next update.

• Autopilot Disconnect Sound: When the AP is disconnected, the alert sound stutters or is momentarily interrupted.

• LNAV / Direct-To Issue: When executing a "Direct-To," the aircraft does not follow the LNAV path correctly and turns in an unexpected direction.

• Autobrake Disarm Voice: The "Autobrake Off" callout is extremely quiet (like a whisper) and hard to hear.

• TCAS Reset on Takeoff: On my second flight, even though TCAS was set to ON/TA-RA, it automatically switched to OFF upon rotation/takeoff.

• Company Message: The "Company Message" notification still does not disappear as expected.

Thank you for your hard work on this project!

Edited Thursday at 04:36 AM by Yon

[klusik]

Hello, what about the WASM stability? Thank you for your report! 💖

That DIR-LNAV thingy is very frustrating, I was surprised about it, I just clicked direct and got to set up something else, looked out and I am 40 NM somewhere else 😄 

[frank_m]

14 hours ago, Yon said:

Company Message: The "Company Message" notification still does not disappear as expected.

Can't confirm. The notification disappears as soon as you have read the messages. 

[NikDeLion]

Also, the "Press to test and reset" button clickspot in oxygen mask is missing now

[danielsousvide]

Is it possible the update process was flawed - as in the wrong package was uploaded or incomplete?  I just had my first flight in quite a while and updated I had about 10 - 15 weird things happen.
- Could not get the autopilot pull function to reliably work

- Approach mode armed itself.

- G/S activated when aircraft was 2000 feet below the glideslope

- After landing I got a NAV IR not aligned message

- LS button was "always on"

- Slide deployed when opening door at terminal

- Step altitudes kept deleting themselves

- Repeated CPU spikes causing glitchy performance

- A range of interactive click spots not working (doors, etc.)

 

This may be naive, but is it possible an older update file was used?  Feels like the plane went many steps backwards in this update...

 

- Daniel

[LineDX]

19 hours ago, danielsousvide said:

Is it possible the update process was flawed - as in the wrong package was uploaded or incomplete?  I just had my first flight in quite a while and updated I had about 10 - 15 weird things happen.
- Could not get the autopilot pull function to reliably work

- Approach mode armed itself.

- G/S activated when aircraft was 2000 feet below the glideslope

- After landing I got a NAV IR not aligned message

- LS button was "always on"

- Slide deployed when opening door at terminal

- Step altitudes kept deleting themselves

- Repeated CPU spikes causing glitchy performance

- A range of interactive click spots not working (doors, etc.)

 

This may be naive, but is it possible an older update file was used?  Feels like the plane went many steps backwards in this update...

 

- Daniel

Dan, try to reinstall and clear the WASM folder and run the sim as admin after updating. Good luck.