Flight Engineer/Radar Altimeter Call Outs

[G550flyer]

@IniJamir I know you have logged this one under suggestions, but just wanted to give you some context just in case. This aircraft, definitely with the DC10 has a limited landing sight picture. At 4.5 degrees pitch in the DC10 and the cockpit height, you have limited peripheral vision. In the L1011 at 7 degrees pitch on approach, it has to be worst. In the DC10, we had the GPWS callouts coming at 100 and then 50 to 10. These call outs are essential and give you a good sense of sink rate and when to start your flare. As the callouts start and you are shifting your aimpoint down the runway, that callout cadence also tells you what your flare rate should be. 

[IniJamir]

Hi, so it looks like this is being worked on actively, no ETA on the delivery as we are still waiting on some elements internally, thank you. 🙂

[atcogl]

On 4/13/2026 at 10:47 AM, IniJamir said:

Hi, so it looks like this is being worked on actively, no ETA on the delivery as we are still waiting on some elements internally, thank you. 🙂

In the V1.0.3 update changelog it appeared this was added "FIXED Add sounds to RA"
However I have not seen any change, still just the 100 and 50ft callouts. Were these calls intended to be added in 1.0.3 or is the changelog referencing something else?