Agung Pamungkas Posted February 28 Posted February 28 I have problem with A350 FS2020 version : 1. When I switch off autopilot the warning chime continues whining even clear the warning panel, I must go to outside (camera) and then back to the cockpit the chime will silent. 2. Wind or engine noise while the landing gear down is annoying, even my neighbour can hear it loud. 3. I click the video near the throttle and the instrument is freeze, the plane still flying but it's uncontrollable 4. In the outside of the plane under the belly there is two hot air open like an exhaust, or it's just like a flap cowl in Cessna, I saw in other videos it is closed, what is it?
LineDX Posted February 28 Posted February 28 1 hour ago, Agung Pamungkas said: I have problem with A350 FS2020 version : 1. When I switch off autopilot the warning chime continues whining even clear the warning panel, I must go to outside (camera) and then back to the cockpit the chime will silent. 2. Wind or engine noise while the landing gear down is annoying, even my neighbour can hear it loud. 3. I click the video near the throttle and the instrument is freeze, the plane still flying but it's uncontrollable 4. In the outside of the plane under the belly there is two hot air open like an exhaust, or it's just like a flap cowl in Cessna, I saw in other videos it is closed, what is it? Same issue withe Ap disconnect chime in fs24 as well.
Cammac Posted February 28 Posted February 28 2 hours ago, Liamjames said: The main issue I am having which is making the jet unflyable is the pitch vs auto pilot relationship. the rotate feel is gross. The thing leaps off the ground at like 100kts which is crazy. You would have thought they got this part right haha. anyway. On departure I engage Ap1… moments later the jet pitches nose high and the AP goes into protec mode. This cycles continues all the way to top of climb. Even the flight directors seems off. They sit way low and then move erratically nose high. Autopilot doesn’t work at all. anyone had similar issues? (FS2024) Hi, Please make sure you have your AI assits off as they can be set back to on and will trim the aircraft causing the issues you are seeing. 1
Delta_A350 Posted February 28 Posted February 28 my engines fail midflight and I have plenty of fuel. the hype on this plane is crazy. I have the same ap issues too.
daveukldn Posted February 28 Posted February 28 3 hours ago, LineDX said: Same issue withe Ap disconnect chime in fs24 as well. 4 hours ago, Agung Pamungkas said: I have problem with A350 FS2020 version : 1. When I switch off autopilot the warning chime continues whining even clear the warning panel, I must go to outside (camera) and then back to the cockpit the chime will silent. 2. Wind or engine noise while the landing gear down is annoying, even my neighbour can hear it loud. Having the same issues with the AP disconnect and loud gear down noises. Also on landing the a/c veers to right and off the runway on rollout. This is with the autobrake set and reverse thrust. Autopilot is on.
DrShadow Posted February 28 Posted February 28 Hi all Thank you for sharing your thougths. Well, does anybody also have a AP problem? As soon as i set v/s to 20 and engage AP my Plane pitches up like 40-60 and more degrees, until uncontolable. I am i doing it wrong ore is there a bug? Thank so much for your reply Cheers Pascal
DrShadow Posted February 28 Posted February 28 10 hours ago, Liamjames said: The main issue I am having which is making the jet unflyable is the pitch vs auto pilot relationship. the rotate feel is gross. The thing leaps off the ground at like 100kts which is crazy. You would have thought they got this part right haha. anyway. On departure I engage Ap1… moments later the jet pitches nose high and the AP goes into protec mode. This cycles continues all the way to top of climb. Even the flight directors seems off. They sit way low and then move erratically nose high. Autopilot doesn’t work at all. anyone had similar issues? (FS2024) Hi here the sme, but with msfs 2020. All ai assist off.
Patrick Cole Posted February 28 Posted February 28 I have a major problem in MSFS2024. Loading the A350 (doesn't matter which variant, or livery), it takes ages to start and as soon as it says "ready to fly" it freezes with the EFB screen going grey. I have no use of any keys nor mouse and the only option is to use task manager to exit the sim. I have uninstalled and reinstalled 3 times and updated with the same result every time. It is working in MSFS2020. At least to launch, fly around and land anyway.
Tripdog87 Posted February 28 Posted February 28 On 2/27/2025 at 5:36 AM, Came36 said: Im having control issues about 1hr into flight. Aileron occilations lead to an uncontrollable state where the AP is throwing the airplane 90 degrees to either side. Hello Captain, If using FS24 go into your control settings and at the button tick the little box until you see “Assigned.” I’m not in front of my PC at the moment but I think the is three to chose from (None, Essential and Assigned) chose Assigned and go through every one of your controls/ keyboard and mouse and see if there is any bindings/ assignments that have anything to do with (Aileron/Elevator/Rudder) and remove the assignment bearing in mind you keep the assignment(s) to the controller that you want it assigned to. I had the same banking curve (right turn) and when I looked into my control assignments I noticed there was (Aileron/Rudder and or Elevator) axis and trim assignments that were put in automatically through the control recognition that MSFS2020 and 24 does. As soon as I deleted those, the flying in right circles stopped and I’ve been flying happy ever since.
Tripdog87 Posted February 28 Posted February 28 11 hours ago, Agung Pamungkas said: I have problem with A350 FS2020 version : 1. When I switch off autopilot the warning chime continues whining even clear the warning panel, I must go to outside (camera) and then back to the cockpit the chime will silent. 2. Wind or engine noise while the landing gear down is annoying, even my neighbour can hear it loud. 3. I click the video near the throttle and the instrument is freeze, the plane still flying but it's uncontrollable 4. In the outside of the plane under the belly there is two hot air open like an exhaust, or it's just like a flap cowl in Cessna, I saw in other videos it is closed, what is it? The autopilot chime I found can be silenced by assigning the (Red Button - TCA Airbus Sidestick) to AUTOPILOT OFF in the controls menu. After that it’s just a double click, click one disengages the AP and the second click silences it.
LineDX Posted February 28 Posted February 28 10 hours ago, Cammac said: Hi, Please make sure you have your AI assits off as they can be set back to on and will trim the aircraft causing the issues you are seeing. That's right. You have to make the AI trim is off in Sim settings and T/O Trim is set before you take off otherwise you will have the above mentioned issues.
juzzdawg88 Posted March 1 Posted March 1 This aircraft is completely useless, simbrief integration does not work and freezes, constant freezes, unable to select star and sids. I cannot complete a full flight let alone depart from a gate.
Agung Pamungkas Posted March 1 Posted March 1 10 hours ago, Tripdog87 said: The autopilot chime I found can be silenced by assigning the (Red Button - TCA Airbus Sidestick) to AUTOPILOT OFF in the controls menu. After that it’s just a double click, click one disengages the AP and the second click silences it. For now, I switch off AP, clear the red warning, go outside the plane, and go back to the cockpit, the chime will silence.
Tivadar Körtvélyes Posted March 1 Posted March 1 Hi everyone! First of all, thanks for iniBuilds for this aircraft. After carefully reading all the messages I haven't spotted the issue I'm having, so maybe I'm the one who is to blame for this 🙂 So, during CRZ the quadrants are in CL detent position and the autopilot is engaged in ALT CRZ, however the throttle managment shows, that it is in CLB mode and delivering 98 percent thrust. The speed is .881 instead of the .85 which is shown by the FMS. Did I missed something, or it's just an other bug? Thanks for your reply!
Maverick991 Posted March 1 Posted March 1 Hi, I´ve noticed some bug. F-PLN is showing S/C at SOVED as it should, but in PERF page it shows S/C at RIKAL with the wrong FL. Time and distance is correct.
Maverick991 Posted March 1 Posted March 1 And second problem I´ve found, LW and GW is not matching at all !!!
Agung Pamungkas Posted March 2 Posted March 2 After updating to 1.0.1 version, most of my problems were solved, like navigraph chart and loud landing gear sound. And the performance is slightly better than before.
BavarianA350 Posted March 2 Posted March 2 (edited) 13 hours ago, Maverick991 said: And second problem I´ve found, LW and GW is not matching at all !!! "Select abnormal not sensed overweight landing!" 🤣 Edited March 2 by BavarianA350
Seth2413 Posted March 2 Posted March 2 (edited) With new update this is now happening to me, 2 flights, on both AP turns off for no reason and I go into a steep left hand dive with every alarm blaring. It is the same as the OP videos. 2 flights exactly the same. Plane is unplayable for me now as keeps doing this. All my AI assists are off. So glad I forked out $120 AUD for this. Other issues - still hard to click on the MCDU at times, have the left button click about 5 times to get it to work. - FPS performance is the worst of any plane I own especially in VR. No improvement with performance from update. Edited March 2 by Seth2413
Agung Pamungkas Posted March 2 Posted March 2 How to connect the A350 to the jetway terminal? Or to connect stairs when available? I don't have GSX so it is annoying for me when park on a terminal or stand the passenger must jump from the plane.
Robert431 Posted March 2 Posted March 2 How do you turn on the Flight Attendant Panel? I can’t click any of the buttons. The screen is blank
SimHead Posted March 3 Author Posted March 3 (edited) After the patch the freezes seems to have stopped. That is great news. There seems to be two strange things going on with the FMS however. 1. The Fuel predictions are way off. I did a 2 hour flight and the prediction was 6000 Lbs off. I left the flight in fully managed and didn't make any changes. It seemed to descend way too early on the FPL. There were heavy headwinds which were loaded into the FMS and the plane decide to just act like there were none so it rode the throttles all the way down... It would get slow and throttle up to compensate instead of just descending later. It acted like it had no idea there was a 100kt headwind and just was trying to descend through it on power... I did another flight and you can sit and watch the EFOB just decrease the entire flight by 1000s of lbs. If I hadn't added some in the SB profile I would have ran out. 2. The ALT predictions are way off. I loaded my SB flight plan in fuel and weights and plane said at 420,000LBS GW with 310 passengers it claimed it could achieve OPT FL410. I ended up at FL375 with the throttle firewalled and about a 50 FPM rate of climb? That is nowhere close... 3. I am echoing a point made by a previous poster but the Simbrief weights seem to not be playing with the plane properly. On the flight that I couldn't climb any higher showed on the EIS it was 500,000lbs but the Simbrief and the FPL showed 420,000. There is some sort of disconnect between the weights it seems. 4. The SPD knob if you roll it without pulling or pushing for managed shows like M 5.7 or something stupid. Edited March 3 by SimHead
wonderwong Posted March 3 Posted March 3 Dear IniBuilds Team, First of all, I would like to express my sincere appreciation for the team's dedication in developing the A350 (Advanced Passenger Airliner). The visual quality and details are so amazing that I thought it was an official advertisement from an airline. However, with a heavy heart, I would like to share my experience when using this product at MSFS 2020. My laptop with Intel i5-11400H, 16GB RAM, and RTX 3050 4GB specifications is actually capable of running PMDG 777-300ER with good performance and fun. Unfortunately, when operating IniBuilds A350, I encountered some technical issues that were quite disruptive to the simulation experience. The airplane often freezes suddenly, the frame rate drops drastically to only 15 fps, and the computer temperature rises to 80-90 degrees Celsius. As a customer who has placed trust and investment in your product, I hope to enjoy a simulation experience that lives up to expectations and promotions. I sincerely hope for an update in the near future to optimize the performance of this aircraft, so that my investment can provide the satisfaction it deserves. Thank you for your attention and quick response. I trust IniBuilds can continue to improve the quality of its products to the satisfaction of flight simulation enthusiasts.
pattona22 Posted March 3 Posted March 3 yo lo vole una vez y ahora no puedo mas se congela al cargar para jugar y no abre mas .ya no se que hacer un saludo muy cordial a todos en este foro pattona ...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now