bribeth Posted February 6 Share Posted February 6 Good evening. On my last couple of flights, I cant seem to get my throttle to go to full. It only seems to power up to maybe 92 N2 which is barely enough to get off the ground and when I do, I'm practically stalling and until I activate the A/T I cant get more power. Its weird. Any ideas? 2 Link to comment Share on other sites More sharing options...
sunnya Posted February 6 Share Posted February 6 check your throttle calibration. After I updated to 1.0.5 the throttle calibration reset and needed to redo it. 1 Link to comment Share on other sites More sharing options...
bribeth Posted February 6 Author Share Posted February 6 40 minutes ago, sunnya said: check your throttle calibration. After I updated to 1.0.5 the throttle calibration reset and needed to redo it. Everything looked ok, but I will check that again Link to comment Share on other sites More sharing options...
bribeth Posted February 6 Author Share Posted February 6 Did the recalibration and its still underpowered. Any other ideas? 2 Link to comment Share on other sites More sharing options...
Aleksey Posted February 6 Share Posted February 6 I also have redused power at taking off. With throttle full lever indicator on RPM gate stop on 86%, RPM also increased to 86%. Take off mod was FLEX TO 43 ot manual TOGA - is no differences. After take off power going to climb thrust itself. Additionaly after take off in NAV mode first point of flight plan is not changing to next one and FD turning to th left or right side to intecept passed point. 1 Link to comment Share on other sites More sharing options...
Fartherbranch55 Posted February 7 Share Posted February 7 same issue here, on takeoff can hardly get airborne and almost stalling after rotate. 2 Link to comment Share on other sites More sharing options...
bribeth Posted February 7 Author Share Posted February 7 At least I know Im not crazy.... Link to comment Share on other sites More sharing options...
SparrowRZ Posted February 7 Share Posted February 7 On 2/5/2024 at 8:48 PM, bribeth said: Good evening. On my last couple of flights, I cant seem to get my throttle to go to full. It only seems to power up to maybe 92 N2 which is barely enough to get off the ground and when I do, I'm practically stalling and until I activate the A/T I cant get more power. Its weird. Any ideas? Same here, but i cant reach N1 86% i do a clean install Link to comment Share on other sites More sharing options...
bribeth Posted February 7 Author Share Posted February 7 Did that solve it? Link to comment Share on other sites More sharing options...
SparrowRZ Posted February 7 Share Posted February 7 38 minutes ago, bribeth said: Did that solve it? No, I asked a friend and he has the same problem, well everything points to a new bugg. Link to comment Share on other sites More sharing options...
sunnya Posted February 7 Share Posted February 7 I also noticed the same problem. Seems to be a bug indeed. Link to comment Share on other sites More sharing options...
pmplayer Posted February 7 Share Posted February 7 Me too, same problem.. cheers 😉 Link to comment Share on other sites More sharing options...
sunnya Posted February 7 Share Posted February 7 it looks like this happens only if throttles are advanced manually. If I hit the TOGA button takeoff thrust is reached normally (at least in my case), but if advance the throttle levers to full power I can reach about 89 N2. Strange.... 1 Link to comment Share on other sites More sharing options...
SimApe Posted February 8 Share Posted February 8 I am having the same issue as well , throttle only going up to 87% when advanced manually. The EFB detected 100% throttle during calibration however. 3 Link to comment Share on other sites More sharing options...
SkySurfer87 Posted February 8 Share Posted February 8 I can confirm same issue here. Throttles are broken in latest update. My reversers are messed up as well. Using honeycomb bravo. Number two reverse lever only closes halfway when selecting reversers off. Tom Link to comment Share on other sites More sharing options...
JoshF Posted February 8 Share Posted February 8 9 hours ago, SkySurfer87 said: I can confirm same issue here. Throttles are broken in latest update. My reversers are messed up as well. Using honeycomb bravo. Number two reverse lever only closes halfway when selecting reversers off. Tom How is your Bravo set up? I'm using one and haven't seen this Link to comment Share on other sites More sharing options...
JoshF Posted February 8 Share Posted February 8 Additionally all here please confirm which axis binding you're using in the sim? Regular Throttle Axis, or Throttle Axis (0-100%)? Link to comment Share on other sites More sharing options...
SimApe Posted February 8 Share Posted February 8 1 hour ago, JoshF said: Additionally all here please confirm which axis binding you're using in the sim? Regular Throttle Axis, or Throttle Axis (0-100%)? I am using regular throttle axis. I tried with other planes (pmdg,fbw) to make sure it is not my TCA throttle acting up and both are able to reach 100% throttle. The EFB in ini build also shows 100% throttle when calibrating , it is just the N1 that seems to be stuck at 87% when moving the throttle full🙂 Link to comment Share on other sites More sharing options...
pmplayer Posted February 8 Share Posted February 8 I am using regular throttle axis aswell ! If u use the TOGO Button it seems to work, but using Man Throttle it does not ( about 86-87% ) cheers 😉 1 Link to comment Share on other sites More sharing options...
bribeth Posted February 8 Author Share Posted February 8 (edited) 3 hours ago, JoshF said: Additionally all here please confirm which axis binding you're using in the sim? Regular Throttle Axis, or Throttle Axis (0-100%)? This is my throttle setup. And yes, I am using a Bravo. Calibration is set and I am using the latest build available to us. With the TOGA button I can get to full power, manual 87% estimated. Edited February 8 by bribeth Link to comment Share on other sites More sharing options...
ponpon Posted February 8 Share Posted February 8 Hello, Same issue here, manual full power is 86%, and even worse : After a 2hr flight and after landing, my throttle axis controlled only the reverse. It was impossible to join the parking. I didn't change the setup during my flight and I confirm that my reverse axis option was unselected on the calibration page. I did a couple throttle calibration, I had still the issue. Engines work 100% with A/T. Aircraft concerned : A300-600F / Joystick : T.16000 Link to comment Share on other sites More sharing options...
ponpon Posted February 8 Share Posted February 8 6 minutes ago, ponpon said: After a 2hr flight and after landing, my throttle axis controlled only the reverse EDIT: I have this issue after pressing the F2 on the keyboard. I didn't have this issue before 1.0.5 1 Link to comment Share on other sites More sharing options...
KorEl Posted February 8 Share Posted February 8 I confirm too. TOGA power can be achieved only with the A/T engaged pushing the buttons. Without A/T manually advancing the throttles N1 does not go over 87%. It is not a calibration issue, checked with the A310 and it works as it should. 1 Link to comment Share on other sites More sharing options...
NavyKing1992 Posted February 8 Share Posted February 8 Same here, Manual full power: 86.2 % N1 (95.2 N2) A/T: no issues I do not know which update messed it up..... EFB calibration shows the right "values". Cheers, Chris 1 Link to comment Share on other sites More sharing options...
SparrowRZ Posted February 8 Share Posted February 8 8 hours ago, JoshF said: Additionally all here please confirm which axis binding you're using in the sim? Regular Throttle Axis, or Throttle Axis (0-100%)? Im using keyboard(F1,F2;F3,F4) on 1.04 i dont have this issue. Link to comment Share on other sites More sharing options...
Recommended Posts