Mataplun Posted February 3 Posted February 3 Hi there Just made a flight with Update 1.04. After flying in heading mode during approach, I couldnt direct-to to a waypoint on the ILS. It could be entered, but the drawing on the ND was not accurate (drew a curve, always left the T-P point on the right side for a left turn, Offset showed L .0 no matter where I was) and the plane banked 30° right and maintained that. Is this a known issue? Greets Flo 1
CrossHyparu Posted February 3 Posted February 3 Screenshots attached. After hitting DIR to the fixes, the NAV wanted to make a left turn for some reason. Even when I was able to get a straight line, the plan inexplicably turned to the left. This was during the 2nd flight, the first leg did not have this issue. 1
Eurosky Posted February 3 Posted February 3 DIR TO not working for me after latest update. When in HDG reverting to back to NAV not working. Impossible to get the aircraft back into Nav mode. Aircraft just flies set Heading/Direction. DIR TO not working in terms of Nav mode. Christian
JetNoise Posted February 3 Posted February 3 Now, thats the 3rd post regarding the same one issue ... Pls read first - think first - post. Otherwise it makes following the forums a p i t a. Thank you Oliver 1
Eurosky Posted February 3 Posted February 3 Actually, I mentioned 2 issues😜. NAV mode not re-engaging and DIR-TO function.
jodle Posted February 3 Posted February 3 Completly uninstall A300 from ini app. Then install. It helped.
Qowy Posted February 3 Posted February 3 (edited) Since this is the larges thread. Leaving this here:https://discord.com/channels/535246634448191499/784467650612822016/1203176921601548369 Basically I have the same problem, some more details that I tested.@jodle how did you test that, because I also had it work once so a little more confidence would be great 😄 Edited February 3 by Qowy
AussieB747 Posted February 3 Posted February 3 Same problem. Having to fly on heading mode the entire way is quite annoying. No matter what, the plane banks in a random direction when it's put into NAV. I have found that I can also pass a waypoint and it still shows that I am tracking to that waypoint (fig 1. LOGAN is after ABNED, but ABNED still showing) I have also found that the distances to the next waypoint are incorrect by approx 10nm, see fig 2. 1 1
Andrea C. Posted February 3 Posted February 3 3 hours ago, Eurosky said: Actually, I mentioned 2 issues😜. NAV mode not re-engaging and DIR-TO function. Confirm! Same problem here!
Andrea C. Posted February 3 Posted February 3 1 hour ago, Andrea C. said: Confirm! Same problem here! It's impossible to follow a LNAV after engaged HDG and then return on NAV mode
NavyKing1992 Posted February 3 Posted February 3 Confirm! Same here. Engaged NAV mode and the aircraft turns left and do not follow the route. Only the HDG mode works. Flight: KMEM-KOKC Route: DUCKZ DCT CIVKI DCT LIT J14 DWINE DCT DIMPL/N0000F110 DCT RIFFL Never ever had that problem prior to the v1.0.4 update and I did lot of flights............. Unfortunately they do 1 step forward and 10 steps back. Inibuilds please do a hot fix since the aircraft is quite unflyable now P.S. Uninstall and install did not help. Cheers, Chris
Xyzan Posted February 3 Posted February 3 For me, NAV did not work from the takeoff. I've never turned heading mode. After takeoff it order FD to turn right (I was following FD, and noticed early turn right, and then constant turn). And whenever I tried to switch back to NAV, it was always, constantly trying to do right turn. I've deprted EDDH, route created using simbrief, and uploaded route to FMC with uplink as well. my route: EDDH/33 N0473F270 AMLU1G AMLUH M852 POVEL Y800 DESAR DCT UPLEG UPLE3M EDDP/26L
Scholli Posted February 3 Posted February 3 I experience said issue after a turnaround: Even after a DIR-TO the position of said fix is different on the ND line and the info in the top right corner. ND drawn seems to be correct, AP apparently wants to follow the info given in the top right corner.
Daniel Landucci Posted February 3 Posted February 3 Same here! I'm flying with HDG mode turned on. If I put it in NAV, it keeps curving infinitely. Very nice update. =/
Fifcok Posted February 3 Posted February 3 Omg! NAV turning right infinitely. It is possible to fly using HDG. Wake up INI! What are you doing with this product? After update I am looking for things which one you mess, not fix 2024-02-03 19-34-05.mp4 1
NavyKing1992 Posted February 3 Posted February 3 2 hours ago, NavyKing1992 said: Confirm! Same here. Engaged NAV mode and the aircraft turns left and do not follow the route. Only the HDG mode works. Flight: KMEM-KOKC Route: DUCKZ DCT CIVKI DCT LIT J14 DWINE DCT DIMPL/N0000F110 DCT RIFFL Never ever had that problem prior to the v1.0.4 update and I did lot of flights............. Unfortunately they do 1 step forward and 10 steps back. Inibuilds please do a hot fix since the aircraft is quite unflyable now P.S. Uninstall and install did not help. Cheers, Chris Update: I did one more flight: EDDP-EDDS, Route: GOLAT T202 LASGA DCT BAMAS Z77 AMOSA DCT GEBNO/N0000F100 No issue at this flight, everything worked as it should. I have no idea what is going on. Sometimes it work, sometimes not. I think it is related to the MSFS, not to the aircraft. There is also an flight which Emanuel did without any problems. Cheers, Chris
Xyzan Posted February 3 Posted February 3 I just wandered... I was flying with Freighter variant. Maybe this matters? Or just (for example) first flight fails... Will try another one (the same as previous) and check.
Xyzan Posted February 3 Posted February 3 I cannot edit previous, so writing next one. I started sim, uploaded same flight (I did not create another one from simbrief) and it worked this time... Will monitor... Directs, switching to heading and back to Nav.
Fifcok Posted February 3 Posted February 3 22 minutes ago, Xyzan said: I cannot edit previous, so writing next one. I started sim, uploaded same flight (I did not create another one from simbrief) and it worked this time... Will monitor... Directs, switching to heading and back to Nav. After restart MFS was good, but after 1h 23min it starts to turn right all the time
Eurosky Posted February 3 Posted February 3 (edited) I have to say it, hate saying it. PMDG, Fenix and Maddog have been solid. PMDG a bit hesitant on Hoppie but they bit scared of progress and cash flow, I guess. IniBuilds somehow manage to go back in time on latest A300 update. Latest update, gents.... you can do better. I do like the A300, you got my money. Shape up, sharpen up and test before fly. The last update is an indication of lack testing and communication. Guys, come on. U can do better. Tad embarrassing. Edited February 3 by Eurosky 1
TxSpur Posted February 3 Posted February 3 I can confirm this problem as well. Last night I was flying the freighter version from KSDF to KRFD on a 51 min hop and turn back. The flight up to KRFD went fine. Vatsim controller cleared me dir to my first SID waypoint and the plane flew fine the whole way up. I landed, shut down the engines, ran the APU and reprogrammed/reloaded for the return flight. Took off and the controller cleared me Dir to my first fix. I was currently on heading mode with level change. I hit dir to the fix and Nav mode and the plane immediately started making a hard turn to the left. My correct heading was to the south. From that point on I was unable to use nav mode no matter what fix I was currently heading to. Every time I activated Nav mode the plane started that left hand turn. Also, I noticed with one of the fixes, when I was practically on top of it it was inside the 5nm ring going off the map display but the fix information in the top right corner said that I was 12nm away from it.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now