Alexair Posted November 27, 2022 Share Posted November 27, 2022 (edited) Hi folks, Just got a new problem with inibuild's inimanager. The Pilot Support tab just went blank. Was working perfectly until now. Everything else seems to be working just fine. Any help will be very much appreciated. Here is a screenshot: Edited November 27, 2022 by Alexair Link to comment Share on other sites More sharing options...
Deleted Account Posted November 27, 2022 Share Posted November 27, 2022 For me it still works without an issue 😕 Tried a reboot / reinstall yet? Link to comment Share on other sites More sharing options...
Alexair Posted November 27, 2022 Author Share Posted November 27, 2022 I did try several reboot with no success. Will try the reinstall then. Will let you know. Thanks. Link to comment Share on other sites More sharing options...
Alexair Posted November 28, 2022 Author Share Posted November 28, 2022 Did uninstall the inimanager and did a clean reinstall. Unfortunately still the same blank screen... Link to comment Share on other sites More sharing options...
Deleted Account Posted November 28, 2022 Share Posted November 28, 2022 1 hour ago, Alexair said: Did uninstall the inimanager and did a clean reinstall. Unfortunately still the same blank screen... Mh.. that´s super weird. Could you please contact direct support then? They´ll help you our for sure 🙂 https://inibuilds.com/contact Link to comment Share on other sites More sharing options...
Alexair Posted November 28, 2022 Author Share Posted November 28, 2022 OK wildo. Thanks ! Link to comment Share on other sites More sharing options...
p96 Posted November 28, 2022 Share Posted November 28, 2022 Hi, I'm a little bit suprised, but the pilot support screen in the iniManager is empty til today. Working fine during the last days to implement simbriet to the MSFS A 310 it' s now impossible to get simbrief implementation anymore. The normal simbrief integration via the FMC Menu never works for me; always pending. So it's very disappointing that this way don't work as well as the way via FMC does not work. Any ideas to get it work again Wolfgang Link to comment Share on other sites More sharing options...
Administrators Sam Posted November 28, 2022 Administrators Share Posted November 28, 2022 Could you please uninstall the iniManager via the control panel, and then delete the iniManager folders in AppData\Local and AppData\Roaming, and then install the iniManager from: inibuilds.com/inimanager? Sam Wheeler Senior Management | iniBuildsinibuilds.com Link to comment Share on other sites More sharing options...
pmplayer Posted November 29, 2022 Share Posted November 29, 2022 16 hours ago, Sam said: Could you please uninstall the iniManager via the control panel, and then delete the iniManager folders in AppData\Local and AppData\Roaming, and then install the iniManager from: inibuilds.com/inimanager? Had the same problem so this worked for me.. cheers Link to comment Share on other sites More sharing options...
pmplayer Posted November 29, 2022 Share Posted November 29, 2022 (edited) 23 minutes ago, pmplayer said: Had the same problem so this worked for me.. cheers Nope sorry, after i opened the manager the second time the pilot window again is total emty - did not hold long 🤔 So what is goeing on here, i am bit confused because it worked before, until this issue is coming in..?? Edited November 29, 2022 by pmplayer Link to comment Share on other sites More sharing options...
Eyz1978 Posted November 29, 2022 Share Posted November 29, 2022 I have the same problem here: I uninstalled the iniManager via the control panel, and then delete the iniManager folders in AppData\Local and AppData\Roaming I installed IniManager The first time I used IniManager I was able to see my Simbrief plan in the Pilot Support tab but if I close IniManager and reopen it I have a blank window in Pilot Support tab. I wanted to use IniManager because I'm still unable to load directly from Simbrief in the A310 FMC (even with the todays's MSFS patch). Link to comment Share on other sites More sharing options...
pmplayer Posted November 29, 2022 Share Posted November 29, 2022 47 minutes ago, Eyz1978 said: I have the same problem here: I uninstalled the iniManager via the control panel, and then delete the iniManager folders in AppData\Local and AppData\Roaming I installed IniManager The first time I used IniManager I was able to see my Simbrief plan in the Pilot Support tab but if I close IniManager and reopen it I have a blank window in Pilot Support tab. I wanted to use IniManager because I'm still unable to load directly from Simbrief in the A310 FMC (even with the todays's MSFS patch). There is still one Option i am using at the moment: You can download the Simbrief Downloader that gives you the Option to save the last Flightplan for all Developer that set up in there, inibuild aswell. There you can set the location where to save the plan, for example in my case: c:\Users\yourname\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalState\packages\microsoft-aircraft-a310-300\work\flightplans\ for the store Version. If you dont see that flightplan folder there just create that folder and save the flightplan in there, i did this and it is working now, so hope it helps you aswell.. Just to say that this desaster with not seeing the pilot page in the inimanager should be fixed and i am not shure if the plan load work over the FMC; if not this should be go under a fix aswell - long time problems now.. 🤔 cheers 😉 Link to comment Share on other sites More sharing options...
Eyz1978 Posted November 29, 2022 Share Posted November 29, 2022 Thanks a lot. Link to comment Share on other sites More sharing options...
Eyz1978 Posted November 29, 2022 Share Posted November 29, 2022 1 hour ago, pmplayer said: There is still one Option i am using at the moment: You can download the Simbrief Downloader that gives you the Option to save the last Flightplan for all Developer that set up in there, inibuild aswell. There you can set the location where to save the plan, for example in my case: c:\Users\yourname\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalState\packages\microsoft-aircraft-a310-300\work\flightplans\ for the store Version. If you dont see that flightplan folder there just create that folder and save the flightplan in there, i did this and it is working now, so hope it helps you aswell.. Just to say that this desaster with not seeing the pilot page in the inimanager should be fixed and i am not shure if the plan load work over the FMC; if not this should be go under a fix aswell - long time problems now.. 🤔 cheers 😉 I tried to use Simbrief downloader and create the flightplans directory as you suggested but when I entered From/To in FMC init page it did not see the plan. My MSFS package and community are not on the same drive than MSFS program itself, this could be the problem maybe. However thanks again for your suggestion. Link to comment Share on other sites More sharing options...
pmplayer Posted November 29, 2022 Share Posted November 29, 2022 2 hours ago, Eyz1978 said: I tried to use Simbrief downloader and create the flightplans directory as you suggested but when I entered From/To in FMC init page it did not see the plan. My MSFS package and community are not on the same drive than MSFS program itself, this could be the problem maybe. However thanks again for your suggestion. Sorry it does not work for you, i did load a plan a couple of minutes back and it worked fine. My MSFS is under C Drive but my Community and Official is on Drive D but this means my MSFS package Folder is C Drive so could be the reason - but not shure about that.. cheers 😉 Link to comment Share on other sites More sharing options...
Alexair Posted November 29, 2022 Author Share Posted November 29, 2022 12 hours ago, pmplayer said: Nope sorry, after i opened the manager the second time the pilot window again is total emty - did not hold long 🤔 So what is goeing on here, i am bit confused because it worked before, until this issue is coming in..?? I have exactly the same issue. Desinstall (including deleting both folders) followed by a clean install didn't solve the problem... Link to comment Share on other sites More sharing options...
Eyz1978 Posted November 30, 2022 Share Posted November 30, 2022 2 hours ago, Alexair said: I have exactly the same issue. Desinstall (including deleting both folders) followed by a clean install didn't solve the problem... Same thing for me, after a fresh reinstall IniManager is able to detect and load the Simbrief flight plan. The second time the pilot window is empty. 1 Link to comment Share on other sites More sharing options...
Netherkat Posted December 1, 2022 Share Posted December 1, 2022 Hi all, I seem to have the same exact issue as well. If I delete the ROAMING folder for iniManager, and then launch the program, it seems to work fine. Pilot support is visible and can import the FP from SimBrief. However, as soon as I EXPORT the FP and then change the selection from Pilot Support to anything else (Liveries, for example), going back shows an empty page except for the METAR selection. This happens every time, without fail. I also noticed that the exported flight plan is 0kb, and the MSFS A310 will NOT load it in. Since it will also not load in the plan from Simbrief directly, I am unsure what to do, but that is another issue altogether. Do let me know if anyone has any ideas how to get the iniManager to not show an empty Pilot Support page. Thanks! Link to comment Share on other sites More sharing options...
Alexair Posted December 1, 2022 Author Share Posted December 1, 2022 Look like they working on it and will provide a new version of inimanager. Let's be patient, just a matter of time now... 😉 Link to comment Share on other sites More sharing options...
Norwenkel Posted December 1, 2022 Share Posted December 1, 2022 Same Problem as above mentioned. Link to comment Share on other sites More sharing options...
Norwenkel Posted December 1, 2022 Share Posted December 1, 2022 (edited) 47 minutes ago, Norwenkel said: Same Problem as above mentioned. To be more specific: Till today and after the Navigraph and MSFS update it stopped working as it should do Edited December 1, 2022 by Norwenkel Link to comment Share on other sites More sharing options...
Gruber Posted December 3, 2022 Share Posted December 3, 2022 Also have this issue. When first launched it worked fine but I clicked on the METAR tab and it appears to be stuck there ever since with no way back to the main Pilot Support page. Link to comment Share on other sites More sharing options...
Norwenkel Posted December 5, 2022 Share Posted December 5, 2022 Even version 2.03 does not help to solve this issue. Because there is no debug or log file I can nor provide any additional informations Link to comment Share on other sites More sharing options...
Alexair Posted December 7, 2022 Author Share Posted December 7, 2022 Same for me. Still not working... Link to comment Share on other sites More sharing options...
Deleted Account Posted December 7, 2022 Share Posted December 7, 2022 Yes, we are aware and are still looking into why this is happening. Sorry for the inconvenience caused by this 😕 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now