mattY
-
Posts
150 -
Joined
-
Last visited
-
Days Won
21
Content Type
Profiles
Forums
Downloads
Posts posted by mattY
-
-
v2.3.5 of the iniManager has been released (For Windows). This update addresses a known bug with not being able to checkout in-app.
This update will be downloaded automatically when you launch the app or you can manually download it here.
v2.3.5
- Fix for checkout loading issue
- Addon installation updated to allow a single addon to be installed at any given time -
Thank you to you all for your support, love and feedback on the PW/IDC update on the iniBuilds A300-600R airliner!
We have been working tremendously hard on fixes and improvements over the past few weeks! You will notice various changes in the product and that has come from some feedback from IRL A300-600R airliner pilots from different operators around the world.
A further note that in this update we have temporarily disabled the SEC FPLN in order to get this update out as we still have some pending work to do in this area that did not finish up in time. We did not want to hold this release up for that, and we hope to update again next week with that work wrapped up and the SEC FPLN operable once again.
Thank you for your support and have a lovely weekend!-----
v1.1.1 of the iniBuilds A300-600R Airliner for MSFS has been released. This update fixes lots of different items from systems, to art, sounds and more! Take a read through the extensive changelog below!
This update can be downloaded via the iniManager.
v1.1.1
SystemsFixed - [VNAV] When in the turn VDEV reporting low on path but ending high after turn complete
Fixed - [SYS] When pressing N1 mode no ECAM is shown
Fixed - [ENG] OIL TEMP to not be based on EGT
Fixed - Double pressing +/- on IDC doesn't' switch between a + and -, just inserts + every time
Fixed - [IDC] AOC Enroute - Pos Rpt unable to change fuel from KG to LBS, regardless of units selected on EFB
Fixed - [IDC] Squawk IDENT on ATC/TCAS CONTROL page doesn't send ident command to Vpilot
Fixed - F-PLN B page when RSK should take to VERT REV B page also
Fixed - [IDC]TCAS "TA ONLY" state doesn't show an indication in the TCAS control page
Fixed - [SYS] ECAM TCAS STBY memo does not appear when ALT RPTG ON
Fixed - [SYS] No Bleed air pressure indication with APU Bleed ON, ENG OFF
Fixed - [SYS] Bleed air pressure gauge gets stuck to last value when R ENG BLEED = OFF
Fixed - Can't step through ATLN/SEC F-PLNs
Fixed - BRG/DIST should be to 1 decimal place
Fixed - TO Config should read NORM FOR T/O
Fixed - TCAS showing traffic at wrong relative altitude
Fixed - STAR selection code crash
Fixed - EFIS dials (DH, FPA) can be adjusted with FCU off
Fixed - F-PLN B page wind format
Fixed - [FMGS] Speeds in plan do not account for transition alt
Fixed - [ENG] N2 speed during crank
Fixed - Manual changes to INIT B should be big font
Fixed - Pressing GPWS switch when alert is active does not cancel warnings
Fixed - PACKS OFF Operations
Fixed - AP/AT Disconnect switches not animated via control input
Fixed - [VNAV] Aiming for CST too early
Fixed - If a message is open on one idc, sending a message from the other messes with the message displaying IDC
Fixed - ORIG/DEST have no input sanitisation
Fixed - Switching panel button behaviour
Fixed - Should be possible to modify sps/alt/wind dir/temp directly on F-PLN
Fixed - Should be able to dial in a speed when in PROF like in the A320 for when you switch to LVL CHG or VS
Fixed - Unable to change LAT/LON with slew keys INIT A
Fixed - Navaid/REF pages
Fixed - MCDU F-PLN page additions and corrections
Fixed - IMM DESC is started with any right LSK on F-PLN page
Fixed - Des arrow is few pixels off again
Fixed - Wrong bearings on SID (FACT RWY19 TETAN 1A SID)
Fixed - Tiller getting stuck left when used via rudder axis
Fixed - [IDC] COM Presets not saving either Com1 or Com2
Fixed - Throttle locks to idle after turning off autothrust
Fixed - [SYS] CTD/Plane stops responding when deleting HOLD/Waypoint from PROC in MCDU
Fixed - Should be possible to modify sps/alt/wind dir/temp directly on F-PLN
Fixed - ENG 2 PW EGT max pointer needle doesn't move
Fixed - MCDU F-PLN page additions and corrections
Fixed - Wrong bearings on SID (FACT RWY19 TETAN 1A SID)
Fixed - PFD errors
Fixed - Oil level mismatch on PW variant
Fixed - FMS number rounding
Fixed - ANTI SKID release indicators in flight on the wheel page are missing
Fixed - Door SD Page improvements
ArtFixed - Cargo compartment smoke detection switch animation issue
Fixed - APU exhaust still visible after being shut down
Fixed - Missing GPWS Landing Flaps/ Slats selector switch text
Fixed - [ART] Using the IDC panel - lose the lettering and the illumination around the ILS and VOR frequencies
Fixed - [ART][PW] Eng 2 EGT Orange Needle INOP
Fixed - [ART] Weird shadow on IGN/APU panel buttons
Fixed - EGT warning light on GE engine config lighting up at PW limits
Fixed - [ART] FO/CAPT switching lower sys indications should be boxed
Fixed - Squib emissive should be white, not amber
Fixed - [ART] FO Switching panel has red lines on buttons when CAPT side switching is set to SYS3
Fixed - Engine 1 Pylon labels mirrored
Fixed - [ART] PW Pax house livery on the nose says Freighter (600RF instead of 600R)
Fixed - [PW] Pilots Model missing from external view
Fixed - Cabin light resets when zooming out
SoundsFixed - GPWS test plays in C&D
Fixed - Alt alert C chord cuts off early if you rapidly adjust the alt knob on the ground
Fixed - [SOUND] Exterior view engine sounds fade in and out
Fixed - PW sounds on fuel injection
Fixed - Increase ATC COM telex volume
Fixed - RA Callouts playing on panel state change
Fixed - Horizontal Stabilizer Trim animation inverted
Fixed - Engine sounds disappear too fast on shut down
Fixed - Sound Mix FeedbackEFB
Fixed - Pax EFB has toggle catering option avail in the air
Fixed - [EFB] On-screen keyboard only shows numbers for HOPPIE field on settings page
Fixed - [EFB] Enroute map - save/retain zoom level when switching between EFB apps
Fixed - Landing calc RWY graphic units not syncingOther
Fixed - MSFS Checklist TOGA highlights old ATC COM button click spot
Fixed - CPT PFD brightness typo-
9
-
-
v1.2.0 of iniBuilds Los Angeles (KLAX) for MSFS has been released. This update is a large overhaul to the old version and should bring significant performance enhancements! We've completely remodelled the TBIT, updated LODs, updated GSE models and placements, updated taxiway signs and layout to match the current layout and so much more.
This update can be downloaded via the iniManager.
v1.2.0- TBIT and TBIT satellite have largely been remade. Properly LOD'ed with a reduction in the overall number of materials and textures.
- Terminal 3 updated to current layout.
- Associated T3 parking/jetways etc updated
- All building and terrain models have had lods updated and should now work correctly in normal flight ops.
- HD textures reduced in size overall.
- Some GSE has been replaced with newer models
- GSE placements have been thinned out and inimanager options added for better control.
- Taxiway D extension added
- Taxi signs adjusted
- Various taxiway designations corrected
- Various terrain adjustments to reduce bumps
- FedEx Cargo area Gate 2 shows as gate "Z"
- All TBIT gates have the correct number of jetways
- Taxiway Edge lighting misplacements
- Airline terminal info boards corrected
- United Hangar missing gate numbers on ground marking
- Replaced default LOC arrays with custom versions
- Replaced missing GS antennae
- VDGS updated to the latest version-
2
-
1
-
-
v2.3.4 of the iniManager has been released (For Windows). This update addresses some bugs with the client writing the layout.json and also made the configurations steps fully synchronous to prevent certain issues.
This update will be downloaded automatically when you launch the app or you can manually download it here.
v2.3.4
- Filtered ".disabled" files from layout.json
- Made the configuration steps fully synchronous to hopefully prevent race conditions from causing issues-
1
-
-
v1.0.1 of iniBuilds Luton (EGGW) for MSFS has been released. This update adds a few models, and addresses some bug fixes to various items such as the approach light colour, floating objects, and bumps in taxiways.
This update can be downloaded via the iniManager.
v1.0.1
Added/updated models:- Signature Flight Support (new interior)
- Marriott Hotel
- Hotel Ibis
- Vauxhall dealership
- Correction to main terminal model
Fixed:
- Floating REILS
- Moved approach point lights to correct position
- Adjust approach light colour
- Various taxiway/terrain corrections
- Parking adjustments including airline code corrections
- Various ground marking changes
- Coach parking lighting
- Environment occluder added to Easyjet hangar
- Changed default LOCs to custom versions (missing on some installs)
- Adjusted TUI hangar signage
- Various fencing adjustments
- DART track clipping ground
- Bump along taxiway F
- AI now forced to backtrack to 25
- Smoothed ramp at E2
-
1
-
v1.0.1 of iniBuilds Abu Dhabi Yas Island (OMF1) for MSFS has been released. This update removes some bumps in the track, adds spawn points on the race circuit grid and some other small fixes.
This update can be downloaded via the iniManager.
v1.0.1
- Fixed bumps on track
- Added grid start positions (spawn points)
- Floating stands fixed -
Hello!
As we move into a new month, we figure it's about time we start to branch off into other areas of the 'simming' world.
Known within the flight sim industry by many, we wanted to push our name further into the industry in general, so with this strategic move we hope it shows our commitment to innovation and the willingness to change!
Although this may come as a shock to many, we are truly excited to see where this will take us in the coming months. So whilst we are not sure if this will be a permanent goodbye to Microsoft Flight Simulator, for now at least, it is. We want to thank you for being part of our journey so far, and if you wish to continue to follow us, you can follow our progress within the race sim world on our socials.
With that, we leave you with some images of the iniR24 for Microsoft Flight Simulator, the latest single seater race car!*
Car Features
- Fully featured driving model including down-force
- Expertly modelled car, latest in PBR textures with amazing glowing liveries
- Feature packed steering wheel with 3 pages of read-out functions
- Lap timers and DRS control available at our Yas Island Marina Circuit
- DRS animation control
- Authentic WWISE sound set
- Switchable PC and Xbox controls allowing for use of steering wheel and pedal hardware
- Feature packed steering wheel with 3 pages of read-out functions
- RPM indicator lights on the top of the wheel
- Steering wheel features Page 1; gMeter read-out, DRS indicator, Lap time difference value, Gear indicator, Speed KMPH, Current time, Last lap time
- Steering wheel features Page 2; Bi-axial gForce indicator, Lap counter, Lap time difference value, Last lap time
- Steering wheel features Page 3; Track humidity: Will say DRY or WET according to the surface condition, Total downforce including changes if the DRS is activated, Gear indicator, Speed KMPH, RPM indicator
Price: Free! - Download Now
Watch The Trailer!
Thanks for continuing to support iniBuilds even through this little April fools😉 keep an eye on some awesome new things to come soon, we're excited for you to see what else we have in store
Kind regards,
iniBuilds Team ❤️*Disclaimer: April 1st 😉
-
1
-
v1.1.0 of the iniBuilds A300-600R Airliner for MSFS has been released. This update adds the anticipated PW engine variant, the IDC radio panel and adds a few features as well as fixes many bugs!
This update can be downloaded via the iniManager.
v1.1.0
New Features
Added – IDC modern radio panel with CPDLC and ACARS systems and sounds
Added – PW passenger and freighter variants with unique systems and engine sounds
Added - Navigraph enroute moving map functionality
Added – EFB Landing Distance calculation performance page
Bug Fixes
Systems
Added - Speed mode preselect
Added - Better VNAV profile descent implementation
Added – Now possible for FMC to not reset when changing panel state
Added - Decel mode
Added - FMC to not reset when changing panel state
------
Fixed - APU ECAM shutdown logic
Fixed - Throttle goes into idle on bumpy runway
Fixed - VNAV issues
Fixed - Inhibit A/THR -> MAN THR reversion during TO phase
Fixed - HYD levels not the same on OHP and ECAM
Fixed - There is no connection between compressor rotation and temperature rate in crank mode
Fixed - ND Drawing issues
Fixed - 3.00° missing in fpl during RNAV approach
Fixed - Speed constraint not taken into account
Fixed - Oil runs out even though the maintenance options is off
Fixed - APU not starting
Fixed - VS does not sync with current climb/des rate
Fixed - APPR page info doesn't clear if you have done an RNAV
Fixed - Flex derate does not modify EPR on display
Fixed – Throttle calibration issue Thrustmaster Boeing Yoke
Fixed - Throttle2_cut sets thrust to 50%, Throttle1_cut works as expected
Fixed - Inhibit A/THR -> MAN THR reversion during TO phase
Fixed - Speed mode preselect
Fixed - Temps going to -56° in cockpit/cabin after starting the descent
Fixed - AI copilot can't change transponder code
Fixed - VOR mode stays in VOR* even though the VOR track got captured
Fixed - Cannot enter custom RTE RSV, immediately changes back to default value
Fixed - ADF flickering
Fixed - Throttle goes into idle on bumpy runway
Fixed - VNAV profile descent implementation
Fixed - VNAV pathing
Fixed - Typo in aircraft.cfg files
Fixed - Throttle issue, exclusive to the Thrustmaster Boeing Yoke
Fixed - Rad alt call seems off.
Fixed - Similar to the two TCAS tests, there are also two GPWS tests
Fixed - Auto Checklist injects fuel instantly, leading to hot start, A310 checklists waits till 20% N2
Fixed - Max Pointer reset no TT
Fixed - APU oil looks to have overflowed
EFB
Added - Allow "My Flight" page to pull info from FMGS when user hand codes flights without Simbrief
Added – better EFB descriptions
Added - Realistic Door Cargo Door Speed control to settings
------
Fixed - Make checklists, flightplan and OFP click and draggable
Fixed - Altimeter unit always in hPa on performance page
Fixed - OFP formatting issues
Fixed - En-Route Map is possible to click the Leaflet link on the bottom right
Sounds
Added – PW sounds
Added – IDC sounds
------
Fixed - Left engine balance not correct vs right engine from pilots seat
Fixed - No ADF/NDB identifier tone
Fixed - Abrupt change in engine sounds during start up
Fixed - Missing button sounds
Fixed - Brake fan sound remains when MSFS is not in focus
Fixed - No landing sound effect
Fixed - Sound several events
Fixed - Flaps motors too quiet in wing view
Fixed - Main Cargo Door missing sound (was there ever a sound?)
Fixed - ALT HLD sound switch plays when FMA mode changes
Art
Fixed - Horizontal Stab not moving with THS setting
Fixed - Reverser Sleeves animation should fully extend as soon as reversers are open - Does not correlate to thrust setting
Fixed - Pallets clipping
Fixed - No integ lighting on brightness buttons IDC
Fixed - Altimeter gauge flickers
Fixed - Duplicated text on overhead
Fixed - DC Voltage gauge showing jumpy animation
Fixed - Reg decal overlap
Fixed - N2 gauge indications-
5
-
5
-
-
iniBuilds London Luton Airport (EGGW)
🛫Discover the World from Luton🛬
The iniBuilds team wants to welcome you to our next UK scenery the low-cost carrier base of London Luton Airport! Situated just 30 miles north of London, Luton serves as a busy gateway to Europe and beyond with over 160 destinations on offer from a variety of carriers such as Ryanair & Easyjet! From the busy landside areas to the modern terminals, explore the world of Luton, arguably one of our most detailed projects to date! We really wanted to up the level of this one and we hope you appreciate the extra effort put in!
You can purchase iniBuilds London Luton Airport for £13.99 (excl.VAT) here - https://inib.uk/luton-msfs
Step into Luton Airport, where modern touches meet the warm welcome of British charm, all ready for you to explore, from landside to pushback and beyond. With GSX making the experience seamless, get ready to embrace the low-cost world with not a single jetway in sight! Fly out with airlines like easyJet, Ryanair, Wizz Air, and TUI Airways to all sorts of destinations. Fly to Paris, dive into the history of Marrakech, or take some holiday goers to a beach in Greece? From Luton, you can head just about anywhere your heart desires!
Scenery Features
- Hand-made ground textures with crisp, bespoke texture sets (Runways, aprons, paths, roads)
- True-to-life airport landside recreation with custom ground decals, signposts, vegetation, parking barriers and more
- Accurately modelled and positioned dynamic airport lighting
- Highly detailed models of all airport buildings, objects and surroundings
- Up to date airport layout reflecting the current, real-world location
- Official GSX Profile included in scenery folder
- Level of Detail (LOD) optimisation for every model to encourage the best performance possible
- Use of the latest MSFS SDK features to allow for the best optimisation and performance possible
- Full iniManager compatibility to configure your scenery for the best possible performance for your system
- Bespoke taxi signage as it is in the real world
Watch The Trailer!
We hope you've been enjoying your Easter holidays, make sure to grab yourself a copy as we're sure VATSIM will be packed full of departures and arrivals out of Luton this weekend. We've had an exciting start to this year and we're only just getting started! Keep an eye out for the A300-600R Airliner update for MSFS coming out soon also!
iniBuilds Team ❤️
-
2
-
We'd like to formally welcome you to the brand new iniBuilds Store! The team have been hard at work developing an improved store with some awesome new features, so this post will walk you through some of them and show you what's new! 🥳
🏡Home Page 🏡
Firstly, from the get-go, you'll notice a difference, the addition of the 'Trending Products' section, a brand new layout, a revised top navigation menu, all of these things will get you to the product you're after in no time! 💪
Here you'll find plenty of products that the community are loving at the moment, from some of iniBuilds' latest releases, to some recently updated, well known and loved sceneries as well!
You'll also notice that each product now has specific identifiers to them, from MSFS, X-Plane and even P3D, every product will have one of three circles next to the name to help you quickly identify the product simulator.
👀 As you can see, you have the title at the top of each card, then the developer and then that simulator identifier! The Simulators are separated into 3 categories as mentioned above, you can quickly and easily see what these are from the following idents -
The last thing to notice on the home page (and all pages for that matter!) is the new currency selector! This new tool allows you to quickly and easily see the projected equivalent of what you'll be charged for each product without having to do so yourself! This is something we can grow as time goes on, so if you have any specific currencies you'd love to see on the store, shoot one of the staff members a message and we'll see what we can do! 💱
🛒Product Pages🛒
Next up, we have the new product pages! These are designed to give you all of the relevant information you need to decide whether to purchase a product! We start with the clear titles, showing the name of the product and reinforcing the simulator it is intended for. If that's all you need to know, click buy it now, or keep shopping around with the 'Add to Cart' feature. If you still need to find out more, keep scrolling! There's a clear product description, followed by some vital key features highlighting the products notable areas, accompanied by some of the product preview images. If the product has enough, you'll be able to click a link to see the full features list. 📝
Following on from there, we have the full product gallery, showcasing some of what you can expect from every product you could ever want to purchase from the store! Click on these to scroll through, once you're done, simply hit the 'X' and that's it!
If the product has a trailer, you'll see this below the product gallery and will give you a fantastic preview of the product before you buy it.
Finally, as a feedback point, we wanted to provide you with some more information regarding each product, namely the version it is currently listed as, therefore, under Product Info and Prerequisites, you'll find a plethora of information relating to each and every product. 🔄
⚙️iniBuilds Pages⚙️
What would an iniBuilds Store be without iniBuilds specific pages?! We've made it even easier for you to find the latest iniBuilds releases, simply click on iniBuilds, then either "Scenery" or "Aircraft" (depending on what it is you're after!) and the latest release will be at the top of that page!
Each product shows the title, a preview image and a short extract from the full description, as well as the previous, you'll also see a price, simulator version and the usual "View More" and "Add to Cart" buttons! Click view more to open the full product page and navigate from there.
🛫Aircraft and Scenery Pages🌍
There are two sections which we had a lot of feedback to improve, namely the Aircraft and Scenery areas.
Starting with Aircraft, you'll see that we've added filtering to this page to enable a quick and easy search through, both simulator and type of aircraft can be filtered through without ever leaving this page. You'll find a host of different products matching the criteria you enter.
Next up, we've separated scenery into regions! Simply click the region you'd like to explore, set the simulator you want to search for and away you go, it's that easy. We've added Africa, Asia, Europe, North America, Oceania & South America as regions for you to browse! 🌎
👨👩👦Vendor Page👨👩👦
Coming to the end of our walkthrough, we've got the vendor list, displaying all of our store vendors with their names, logos and the products they have on offer! Easily identify the developer whose products you want to look at, click the card, and you'll be taken to a page full of their products! 🛍️
Which brings us nicely to the end of this walkthrough! There's plenty of other nifty features we've added, but then you won't be able to see them at work first hand! Nothing will change in regards to accounts, all previous purchases are still tied to your current accounts, however if you do encounter any issues, please do message a member of the team who will be happy to help. 🖥️
Once again, we're so excited to bring this new site to you and hope that they are all welcome changes and enable you to navigate our store with ease and promote a stress free experience, feedback is always welcome, so please do let us know if there's anything you'd like changed, added or removed and we'll take a look at all points!
We've got an exciting end of March coming up, so keep an eye out on our socials, explore the new site and keep flying! 🛫
Kind regards,
iniBuilds Team ❤️-
4
-
1
-
-
v3.1.0 of iniBuilds London Heathrow (EGLL) for MSFS has been released. This update addresses some new GSE positions, reduced textures for these to enhance performance, various jetway clipping issues and much more!
This update can be downloaded via the iniManager.
v3.1.0- T3 model divided into smaller sections to reduction per-mesh tri count (fix for model not showing on xbox)
- Some tweaking of GSE positions
- Reduced GSE textures
- Incorrectly scale stairs removed
- Various jetway/wing clipping issues
- Missing taxiline on 27L
- C1 checkpoint labelled as D1 on taxi sign
- Wrong/missing Taxiway signs
- Floating geo Stand 311
- GSE building clipping
- Various jetways not dropping low enough to meet a/c door
- Layout modified to prevent departing traffic from joining 09L via AB12 and backtracking. AB12 is now no longer available to AI aircraft.
- Adjusting some markings intensity
- Replaced all frequencies with custom (via chart). Default (non-NG) has tower and ground on the same freq.
- Helipad Lights missing
- Jetways disconnected from terminal - various locations
- Misplaced buildings overlapping parking
- Added lighting to cargo area
- Added spawn parking and full taxi paths to remote parking/maintenance areas
- Added custom lighting to fuel depot near cargo area-
2
-
-
v1.1.5 of the iniBuilds A300 BelugaST ON THE LINE for X-Plane 11 is now available. This update addresses the bugs with flight controls locking after takeoff power is set as well as an altimeter bug
This update can be downloaded via the iniManager.
v1.1.5 (X-Plane 11)
Fixed - Broken altimeter bug
Fixed - Flight controls locking after takeoff power is set -
v2.1.2 of the iniBuilds A300-600R(F) ON THE LINE for X-Plane 11 is now available. This update addresses the bugs with flight controls locking after takeoff power is set as well as an altimeter bug
This update can be downloaded via the iniManager.
v2.1.2 (X-Plane 11)
Fixed - Broken altimeter bug
Fixed - Flight controls locking after takeoff power is set-
2
-
-
v2.3.2 of the iniManager has been released (For Windows). This update addresses the client writing layout.json to files after changing scenery config options.
This update will be downloaded automatically when you launch the app or you can manually download it here.
v2.3.2
- Fixed bug with client writing layout.json to scenery folders after changing scenery config options. -
v1.1.4 of the iniBuilds A300 BelugaST ON THE LINE is now available. This update addresses a host of items, from art changes to fix the nose landing gear light not working, systems fixes for freezes when computing TO perf and updates to the flight model, GE/PW engine fixes and more!
This update can be downloaded via the iniManager.
v1.1.4Art
Fixed – Nose Landing Gear lights not working
Fixed - Strobes too bright
Fixed - FO side rotaries and digital displays offset
Fixed - Beluga ST has all ANN lights on all the time even with switch set to BRT and DIM
Fixed - Beluga flight deck is green at nightSystems
Fixed - Freeze computing TO Perf
Fixed - WX Radar not working
Fixed - STBY Altimeter Scale wrong when altitude high
Updated – AIRAC cycle
Fixed - SASL frame rates issue
Fixed - Trim is moving but not affecting flight model
Fixed - Fuel flow not showing and no fuel is burnt by the engines
Fixed - ATHR in the CRZ N1 would hunt
Fixed - Removed experimental flight model message
Fixed - FLAPS and trim not working due to changes in core sim variables
Fixed - A300 and Beluga weather request do not work anymoreFlight Model
Fixed - Adjusted Beluga ST gear placement
Fixed - Changed CG slider on EFB to match in sim XP12 CG variable
Fixed - Adjusted GE/PW engines to work correctly with engine model changes in XP12. This will give realistic start times for both the GE/PW and in-flight engine windmilling/restart behaviour. Max motor adjusted for both GE/PW to better reflect max motor N2 valuesSound
Fixed - Erroneous sound spaces in beluga and a300
X-Plane 11 Changelog Items
Fixed AIRAC bug.-
2
-
-
v2.1.1 of the iniBuilds A300-600R(F) ON THE LINE is now available. This update addresses a host of items, from art changes to fix the nose landing gear light not working, systems fixes for freezes when computing TO perf and updates to the flight model, GE/PW engine fixes and more!
This update can be downloaded via the iniManager.
v2.1.1Art
Fixed – Nose Landing Gear lights not working
Fixed - Strobes too bright
Fixed - FO side rotaries and digital displays offset
Fixed - Beluga ST has all ANN lights on all the time even with switch set to BRT and DIM
Fixed - Beluga flight deck is green at nightSystems
Fixed - Freeze computing TO Perf
Fixed - WX Radar not working
Fixed - STBY Altimeter Scale wrong when altitude high
Updated – AIRAC cycle
Fixed - SASL frame rates issue
Fixed - Trim is moving but not affecting flight model
Fixed - Fuel flow not showing and no fuel is burnt by the engines
Fixed - ATHR in the CRZ N1 would hunt
Fixed - Removed experimental flight model message
Fixed - FLAPS and trim not working due to changes in core sim variables
Fixed - A300 and Beluga weather request do not work anymoreFlight Model
Fixed - Adjusted Beluga ST gear placement
Fixed - Changed CG slider on EFB to match in sim XP12 CG variable
Fixed - Adjusted GE/PW engines to work correctly with engine model changes in XP12. This will give realistic start times for both the GE/PW and in-flight engine windmilling/restart behaviour. Max motor adjusted for both GE/PW to better reflect max motor N2 valuesSound
Fixed - Erroneous sound spaces in beluga and a300
X-Plane 11 Changelog Items
Fixed AIRAC bug.-
7
-
3
-
1
-
-
v1.0.4 of iniBuilds Oklahoma City (KOKC) for MSFS has been released. This update addresses updated parking allocations, GSE models updated to include newer LODs and an ILS frequency bug.
This update can be downloaded via the iniManager.
v1.0.4
- Rearranged parking allocation based on updated info
- Cars switched to unified version
- Several GSE models updated to newer LOD version
- Fixed floating containers in DHL area
- Increase size of parking spaces in cargo area
- ILS freqs now visible in VFR map-
2
-
1
-
-
v1.2.0 of iniBuilds New York John F. Kennedy (KJFK) for MSFS has been released. This update addresses performance issues and adds the option to completely disable detailed interiors and instead, replace these with parallax windows! We've also adjusted LOD values, material resolutions, reduced the material count and removed some duplicate elements.
This update can be downloaded via the iniManager.
v1.2.0
T4, T8 & Satellite, Tower and TWA hotel:
- Models split into smaller sections
- LOD values adjusted as necessary
- Overall material resolution and count reduction
- Further implementation of instancing
- Added option for parallax when detailed interiors not in use
- Fixed multiple model issues (stretched UVs, gaps in mesh, missing objects)
- Added emissive boost to floodlights
- Implemented smaller LOD radius
Interiors:
- Reduced amount of people models by approximately 50%
- Separated mesh to ensure none have greater than 65,000 vertices, improving portability on low end devices.
- Reduced material count and replaced materials with vertex colour
- Use of instancing on seats and gates
- Adjusted LOD valuesOther:
-All jetways now have LODs
- Some default assets removed (superfluous)
- Several duplicate elements removed
- Removed hidden interior details from AA Cargo
- ILS freqs now visible on VFR map
- LODs added to all major buildings within the airport boundary-
3
-
-
v2.3.1 of the iniManager has been released (For Windows). This update addresses some issues users have been having whilst trying to download via the iniManager as well as a fix for GSX profiles which retains the installation status after a user logs out and then back in.
This update will be downloaded automatically when you launch the app or you can manually download it here.
v2.3.1
- Updated the download system to be more reliable.
- Fixed GSX Installation status when user logs out and then back into then app.-
1
-
-
v1.2.1 of iniBuilds Ibiza (LEIB) for MSFS has been released. This update addresses the glowing buses at night time and some incorrect gate numbers.
This update can be downloaded via the iniManager.
v1.2.1
- Fixed glowing buses and tankers
- Fixed incorrect gate numbers on VDGS posts -
v1.0.9 of the iniBuilds A300-600R Airliner for MSFS has been released. This update addresses a few bugs relating to items such as the spoiler arming code, numbers cutting off on VOR frequencies and adds general system stability improvements.
This update can be downloaded via the iniManager.
v1.0.9
- Update to spoiler arming code
- Fixed EFB parsing potential null value when fuel divided by 0
- APU EGT not resetting to ambient temp over time and apu fx still visible after shutdown
- Temporarily removed EFB reg/selcal in cockpit option
- AP2 doesn't disconnect through Yoke movement; but generally AP disconnects too quick from movement.
- Adjusted engine hot start and crank logic
- Fixed cut off numbers on VOR frequencies
- Fixed ALT HOLD not stopping climb from VS mode
- Fixed not able to use reverse thrust using key binds
- Fixed ADF needle jumping when signal limit reached
- General system stability improvements-
7
-
2
-
-
v1.1.0 of iniBuilds Honolulu (PHNL) for MSFS has been released. This update includes a significant overhaul to address all LODs, terminals have been re-optimised and an added "No Interior" option to replace interiors with parallax windows has been added!
This update can be downloaded via the iniManager.
v1.1.0
- Complete rework of all LODs
- All GSE updated with current ini lib models
- All terminal models re-optimised and re-exported
- Jetways are now LOD'ed
- Detailed interior streamlined for improved performance.
- Added 'no interior' option to replaced interiors with parallax windows
- Water runways and transition now working
- Many textures have been reduced in resolution
- Overall package footprint now 3.3gb (down from 5.4gb)
- Replaced airport elements that were not showing in some case (LOC, VOR etc)
- Added static disused B712 behind PATC
- Fixed various marking errors
- Added missing or incorrect approach lighting
- Added spawn points at Mokulele Airlines
- Changed Air Service Hawaii to Atlantic Aviation-
2
-
-
v1.2.0 of iniBuilds Ibiza (LEIB) for MSFS has been released. This update overhauls the scenery to the latest iniBuilds scenery standards. From updated taxiway designations, updated ground markings, replaced all GSE with updated models and more.
This update can be downloaded via the iniManager.
v1.2.0Taxiway designations changed to match 2024 scheme:
- AI paths updated
- Taxi sign models updated
- Ground markings updatedOther
- Adjusted parking radii and types
- Adjusted parking stop points to better match markings
- Replaced almost all GSE models with updated and LOD versions
- Some Iberia liveries reworked
- Removed outdated, default models
- Moved GSE models that were obstructing parking positions
- Added additional AI GSE spawn points
- Replaced wig wags with new models
- Overall footprint size reduced to 1.9Gb (from 3.3Gb)
- Added control panel options -
v1.0.8 of the iniBuilds A300-600R Airliner for MSFS has been released. This update addresses the VS mode bug, the improved ground handling flight model and more.
Please note, a re-log in of Navigraph in the EFB may be required.We are version correcting this to 1.0.8 to establish a difference between the upcoming marketplace 1.07 version.
This update can be downloaded via the iniManager.
v1.0.8
Systems
- Fixed - VS mode reset to 0 at each waypoint in FP
- Fixed - When activating HDG mode while in PROFILE mode, PROFILE mode should stay engaged and not switch to LVLChg
- Fixed - Error in HP Valve Fire Loop Test Logic
- Fixed - Sometimes scrolling a value with the Honeycomb Bravo will also have the perceived effect of increasing sim rate
- Fixed - MDA input in FMC currently limited at 8000 (increased to 22000)
- Fixed - KDEN SIDs don't insert.
- Added – Exposed V1/VR/V2 LVARS. (INI_V1_FMGS, INI_VR_FMGS, INI_V2_FMGS)
- Added - Set chocks ON and park brake OFF when loading in cold & darkFlight Model
- Improved ground handling flight modelSounds
- Fixed – MCDU missing some soundsEFB
- Added - Option in settings that allows refueling while engines running
-
13
-
2
-
1
-
iniBuilds Milwaukee Mitchell (KMKE) for Microsoft Flight Simulator Released
in iniBuilds Announcements
Posted
iniBuilds Milwaukee Mitchell (KMKE)
🥛Discover the Midwest and Beyond🐄
Welcome to Milwaukee Mitchell International Airport (KMKE), where your journey to the Midwest and beyond begins! Step into Wisconsin's busiest airport, carefully recreated by iniBuilds. With its captivating visuals and extreme attention to detail, immerse yourself in every aspect of Mitchell Airport, offering routes to over 160 destinations effortlessly. 🥳
COMING SOON!
From the bustling landside spaces to the sleek terminals, delve into the dynamic world of Mitchell Airport. Serving as a hub for prominent airlines such as Southwest Airlines, explore a plethora of destinations awaiting your exploration.
Scenery Features
Watch The Trailer!
We hope that you'll enjoy this one and that it provides you with some extra choices for your domestic flying itineraries! It'll be releasing tomorrow so keep an eye on discord and socials to be the first to download it! We've got some great things coming this year (and towards the end of this month😉) so keep an eye out on our socials for teasers, information and more! Have a great rest of your week and weekend, happy flying!
iniBuilds Team ❤️