ROMAN78

Good Morning, The wierd ILS signal loss is still occuring at most airports whenever flying CATIII approaches and autolands. At about 200ft AGL the ILS signal is lossed and the aircraft either deviates left or right to chase and correct. This is the only aircraft that seems to suffer from it. I've tested with both payware and freeware aircraft and all is normal at each tested airport flying the same exact approach. Please investigate this. Thank you for your time, service and contributions to the FS community.

He's absolutely correct. That is standard operation on Airbus Aircraft. Logo lights come off when airborne and slats are retracted. On descent, they come on as you pass Flaps 2 on the A32X series aircraft and the modern Airbus heavies.In the case with the A300, they illuminate when the flaps are extend pass 15 degrees. That operation you see is normal.

Exactly I did what it was supposed to do. You can also manually hard select a specific altitude between the two altitudes. However you observed normal behavior.

Hello, on multiple flights to different airports, The A300 looses ILS signal on CAT3 autoland conditions at around 50-100ft AGL. Not sure why it's doing this but its the only aircraft that does this . Can anyone else confirm this? Thanks!!

Correction It may be scenery related. I'll just had a smooth autoland at KMEM. I'll keep testing at different airports and report findings

Can confirm this issue. The aircraft definitely veers either left or right at about flare. Hope it gets corrected

Same issue on my end. Never seen anything like this before

Hello, Real excited for this upcoming release! Truly epic. However I was wondering if the maintenance simulation could or is being configured per tail number so we could be actual difference in performance/wear per each ship number actual flight/engine cycle hours. Just wondering. Thanks!! Fantastic work!!! Very Respectfully, Roman78

I also noticed that the bridges (A&B) adjacent to the JBU hangar are unusable. The aircraft fall thru both sides. Other than that the update is a lot smoother. Thanks!

Hello, I noticed the interior lights at Terminal 8 Concourse C don't illuminate during dusk/dawn or night. Concourse B is fully illuminated. Not sure if this was just missed after the update. Thanks!

Tested again and it worked perfectly

Experienced the same thing after the update. Thought it was weird since it always worked before. I don't think its MSFS issue.

I completely agree. I learned myself that on my system the LOD and object detail sliders were high. I had both around 200. I decreased both to slightly below 100 like recommended by the IniBuilds team and gained additional performance and fps without loosing any real detail. To add I was also have issues running the KDAL scenery and it fixed that issue as well. I also followed this tweak on youtube by 2020 fs'ers which has helped also. Not sure if you use a Nvidia GPU but maybe it may help as well. Hope that helps. Have a great day!

Well I'm happy to report that I figured out what my issue was. My LOD was set to high. I adjusted my settings and now I'm getting beautiful FPS in and out of KDAL. The detail is still sublime just had to learn that lesson I guess!😉

Thanks but I can run every other airport that's heavier on detail than KDAL. I'm not using any other other Dallas area sceneries at all.

When approaching from the any direction either way approx 30nm from the field as the scenery starts loading its gets real unstable and stutters every 2 seconds severely

Hello, I'm not sure why, but KDAL is the worst performing scenery I've ever purchased. I own much of inibuilds sceneries and other and I've never had an issue with eahvy frames that to the point that the sim becomes severely unstable down to stutters every 2seconds which made everything unstable. I'm not sure if anyone else is having this issue and I'm not asking for a refund but I'll be unistalling until hopefully someone in the development team can assist. I have an Intel(R) Core(TM) i5-9600K CPU @ 3.70GHz 3.70 GHz with a Nvidia RTX 2070. I've been running all my sceneries under custom ultra for 2 years and never have had an issue. Hope someone can help. Thanks!!

Completely agree! Inibuilds has created a new standard! Would love to see a inibuilds KMCO, KATL & KDFW

Sorry but there's something not quite right with performance. I'm still have the same 1-5 second stutters from base to final approach on both sides of the airport (13L/31R). This is the first time its been like this even at more detailed airports like KLAX and KDTW. Hopefully the developer will take a look if more optimization is an option

Hello, I enjoy the new KDAL. However it is stutters real heavy as you approach the city from the south on approach to 13L/13R all the way to touchdown. It is not fluid at all when taxing on the ground. Not sure if this has been noticed by anyone else. Thanks!!

Rwy 22R has two ILS approach procedures. ILS Y(111.75) and ILSZ (111.95) which is often the most used approach preference. Hope that helps.

Yep real interested in the A300-600F for MSFS. Need FDX/UPS ops!

Hello, Great Job on the airport. Just wondering what the color at Terminal 1 (gates 18-14 was. Looks kinda blueish/teal in this video but in the scenery brown. Not sure what color it is. Just wondering. Thanks

Just did a test flight from Ontario to Los Angeles on VASTIM. So much better. I did have some mods I forgot about that probably conflicted with the scenery. So much better. I'll fly on VATSIM and re-confirm but no stutters after. That's with FSTL and AIG installed and RW weather and flying the Fenix A320

Quick question did you guys create a Sofi Stadium with your scenery? I had another sofi stadium from flightsim.to and Uninstalled to test if that was the issue when I saw one in the scenery. Just wondering. Wanted to know before I test again this morning. Your scenery is simply amazing I'm double checking everything on my end to ensure my setup isn't the issue with bad frames. Thanks!!