-
Posts
48 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Posts posted by Awemeter
-
-
It makes no sense that the spoilers are even being deflected at such high speeds with such a minimal commanded roll rate.
-
2
-
-
-
-
57 minutes ago, CookieChiara said:
It would appear to me that even in 1.0.4 the relative altitudes are still not correct, ENT7741 is showing at the same altitude as me on Vatsim, yet 700ft below on TCAS.
QNH in the area was 1007, so I have a hunch that you're comparing the traffic's true altitude to my pressure (or indicated, I have no way of telling) altitude instead of using pressure altitude for both like the real TCAS does.
I am pretty sure this is less of an ini issue but a sim/vatsim issue. I remember reading a post on the vatsim forums a while ago about the sims and their different atmosphere simulation causing issues but this was a long time ago so I cant find it n
-
-
-
Another issue with the step alt function is that step descents do not work. When I enter a alt below my cruise it just deletes it. Route: OMAA/13R N0492F340 DAXI1G DAXIB Q563 UKUVO G462 TUMAK T557 RAGAS/N0494F330 P550 LAGSA/N0489F340 L223 UMH L852 TESVA UL852 NEGEM DCT MAXOV DCT KARIL DCT KENIN DCT LENOV DCT BABEN/N0483F360 DCT POKEN DCT TIDVU DCT NOVPO DCT NORTI L621 LAPMA DCT AMSEV DCT PEVEB L621 ZOL DCT GUNPA/M085F360 DCT 63N010W 64N020W 65N030W/M085F380 64N040W 62N050W DCT URTAK/N0486F380 DCT LOMTA DCT 5330N07000W/N0483F400 DCT ULDON DCT ROSVO IMEBA9 CYYZ/15L
Step Alts:
FL STEPS OMAA/0340/RAGAS/0330/LAGSA/0340/BABEN/0360/65N030W/0380
5330N07000W/0400 -
Another issue I have noticed is that I never receive TCAS RAs. The ND will display the conflicting aircraft in red, but I never receive climb or descend instructions on the PFD.
-
Because of the size of the X cursor and circle cursor, I can't click recall in the mailbox.
-
-
1 minute ago, Kirkus said:
Sorry about that. Mods can close my post since its a duplicate.
-
During taxi it feels and looks like the aircraft wants to go to the right when all physical flight controls are centered. I have verified through the MSFS control menu that my rudder pedals are centered yet the FCTL page shows there is a tiny deflection to the right.
-
-
I also had a similar issue flying into Zurich
-
10 hours ago, richboy2307 said:
-
I've noticed some issues with the VNAV in this aircraft. When flying on a STAR (Standard Terminal Arrival Route) and encountering a manual leg with a disconnect between the approach and the STAR, the plane tends to forget its current situation. It accelerates to over 300 knots and begins to climb and shows that I'm 99 feet below the path on my PFD. It lasts for about 5 to 10 seconds before the aircraft eventually corrects itself, realizing it is arriving rather than departing, and then slows down and stops climbing.
Additionally, I've observed that the aircraft often disregards the set speed in order to get back on the path. For instance, if I'm below 10,000 feet and the managed speed is set to 250 knots, the plane will sometimes accelerate to over 300 knots to get back on the vertical path. I'm not sure if this behavior is realistic, but I thought it was worth mentioning.
-
In the sim, during almost every turn with autopilot engaged, the spoilers are deflected when they shouldn't be. In that video, a steep turn is done with no spoiler deflection. In the picture attached below, you can see the alieron is pretty much in the neutral position, yet there is a large deflection of the spoilers.
-
-
In real life, most wide bodies, including the A350 use L2 to board instead of L1.
-
-
I accidentally created this on the 2020 section. Could a mod move this to the 2024 section?
-
If you go to the step alts page and start typing in the fix field but click enter while the field is blank, it completely breaks the step alt function. You cannot add any step alts via the drop-down or by typing the waypoint name.
-
-
While you may not be able to hear the gear touch down, there are other indications of touching down, such as the plastic shaking etc.
Jetway unable to reach door at gate 16
in Support
Posted
Same issue at B18