Skip to content
View in the app

A better way to browse. Learn more.

iniBuilds Forum

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
  1. Started by richboy2307,

    Operators of the Global Jet can choose from many different equipment configurations. As it's not possible to model them all, the iniBuilds Global Jet features the following options, selected to best match our reference materials and the aircraft we had access to in development: Data Link Synthetic Vision System Heads-Up Display Enhanced Vision System (HUD SVS Overlay only) ADS-B Out and Link2000+ Airport Moving Map 3rd IFIS GVFD IMA Software v5.8 EEC Software VX2.0

  2. Started by richboy2307,

    Download the iniBuilds Global Jet Paintkit using the link below: iniBuilds_Global_Paintkit_1.0.zip V1.0.0 Changelog: Initial Release

  3. Started by richboy2307,

    Attached below is the Aircraft Manual for the iniBuilds Global Jet for your reference. IniBuilds Global Jet Manual v1.0.pdf

  4. Started by richboy2307,

    Install the linked GSX Profile for the iniBuilds Global Jet. IniBuilds Global Jet - GSX Profile v1.0.zip Changelog v1.0.0 - Initial release featuring custom parking brake and chocks detection logic, along with accurately positioned de-icers, nosewheel, passenger, and baggage doors. Installation Extract the inibuilds-glex folder to %AppData%\Virtuali\Airplanes Uninstallation Delete the inibuilds-glex folder from %AppData%\Virtuali\Airplanes Note: GSX has certain limitations for smaller General Aviation aircraft such as the iniBuilds Global Jet. GSX is primarily designed for use with larger airliners as opposed to relatively smaller GA aircraft. Because of this, some vehic…

  5. Started by richboy2307,

    Global Jet (GLEX)Click the image to add the airframe to your SimBrief!

  6. Started by IniSteve,

    The Inibuilds Global Jet simulates the Proline Fusion's FLEX takeoff mode where the FMS is given an assumed temperature higher than the actual Outside Air Temperature (OAT). The engines then produce less takeoff thrust, which reduces engine wear and fuel burn while still meeting runway and climb performance margins. This guide covers entering weight and balance data, setting up the departure performance page, and selecting FLEX thrust. Weight and Balance – WT & BAL PageBefore the computer can calculate the correct FLEX parameters, you must first ensure the Weight & Balance (W&B) is filled out with the required information. Departure Performance – DEP PERF P…

  7. Keen-eyed pilots may have noticed a floating spoiler panel during walkaround. There is a common gremlin on Globals where a small bubble can form in the actuator for one of the spoilers. When this happens, the bubble can cause the spoiler to lift up slightly when the system is unpressurized. When the relevant hydraulic system for that spoiler is pressurized, the bubble is squashed and the spoiler panel will return to flush. There is no pilot or maintenance action required.

  8. Started by IniSteve,

    During engine start, once the Hydraulics are fully pressurized, the Spoilers and Stab Trim systems perform a self test. While this test is running, a SPLRS/STAB IN TEST CAS message will appear. Moving the control surfaces during this test will cause the test to fail and generate a SPLRS/STAB BIT CAS message that requires a maintenance action to clear. Resetting the TestNavigate to the EMS and pull the following circuit breakers: - FLT CTL 1 CH A - FLT CTL 1 CH B - FLT CTL 2 CH A - FLT CTL 2 CH B Wait 30 seconds, then re-enable all circuit breakers within 10 seconds of each other. From here, do not touch the flight controls or the trim switch for another 3 minutes to a…

  9. Started by IniSteve,

    The Audio settings page on the Electronic Flight Bag (EFB) allows you to fine-tune individual sound category volumes, enable specific sounds, control noise-cancelling and select your preferred cabin announcement language. This page is accessed via EFB Settings > Audio. (Click to enlarge image) Volume SlidersEach category below can be independently adjusted from 0% to 100% using its respective slider: Category Description Engines Engine sounds volume overall - interior and exterior views. Rattles Various rattling sounds from cabin and galley fixtures. Environment Ambient and environmental sounds (wind, rain, airframe noise). Tip: Lowering Internal Engines slider can…

  10. Started by IniSteve,

    Showing / Hiding the EFBClick on the Cover Panel located on the Pilot Side Console on either the Captain (CPT) or First Officer (FO) side, to show or hide the respective EFB tablet holder. (Click to enlarge image) Adjusting EFB Position (Tilt, Pan and Rotate)Open EFB > Settings > EFB > EFB Position Adjustment. A pop-up window will appear with an adjustment area. Click and drag or Scroll wheel with your mouse within the white box to adjust the Tablet Holder and Mount: Left-Right Movement (Click & Drag) — Pans the base holder arm Up-Down Movement (Click & Drag) — Rotates the tablet mount Up-Down Movement (Scroll wheel) — Tilts the tablet mount Once satisfi…

  11. Started by IniSteve,

    SYSTEM OVERVIEWCAP – Cabin Attendant Panel (iniFE Crew Control) The Cabin Attendant Panel controls the cabin: lighting, window shades, reading lights, temperature, music, passenger service and galley stock. This guide covers each tab of the panel and what its controls do. CABIN ATTENDANT PANEL - CONTROLS AND INDICATORSHeader: Shows the destination, the time to destination and the local time at the destination. Status Bar: Shows the cabin connection status, pending requests and the cabin service mode. Main Tabs- At-a-Glance, Service, Cabin, Ambience and Galley. Quick Action Bar: Overview, Reading, Shades, Audio and Screen off. At-a-GlanceCabin Preview: Shows the status of…

  12. Started by IniSteve,

    SYSTEM OVERVIEWThe Passenger Tablet (iniFE) on the iniBuilds Global Jet lets passengers follow the flight, adjust the cabin atmosphere, order food and drinks, play cabin music and call the crew. This guide covers each tab of the tablet and what its controls do. PASSENGER TABLET - CONTROLS AND INDICATORSHeader: Shows the route (such as Lihue → Van Nuys), the time to arrival and the cabin connection status. Main Tabs: Home, Comfort, Dining, Ambience and My flight. Media Bar: Shows the current track, with previous, play/stop and next controls, Quick controls and Crew call button. (Click to enlarge image) HomeYour Journey: Shows the route map and the time to arrival. Explore…

  13. On the iniBuilds Global Jet you can enter planned step climbs directly on the FMS ROUTE page using the following formats: /F470S /FL470S /47000S (Click to enlarge image) A summary of planned step climbs, an optimum step climb finder, and an immediate step climb performance calculator can be found in the VNAV page, CRZ tab. (Click to enlarge image) Auto Step ClimbThe Auto-Step Climb function will automatically adjust the autopilot to fly planned step-climbs entered into the flightplan as described above. It will automatically increase the altitude in the FCU, engage FLC mode, and allow the plane to level off at the new altitude. It will also cancel any step climbs that a…

  14. Started by IniSteve,

    The iniBuilds Global Jet features the option to automatically pause your simulator at a user customizable distance prior to your Top of Descent (TOD) pseudo waypoint. This is useful for when you intend to leave you simulator unsupervised but do not wish to miss out the fun of descending into your destination. (Click to enlarge image) EFB Pause at TOD OptionYou can enable the option to automatically Pause at TOD from the EFB Simulation Settings page. Here you can also set the custom distance (in NM) for when before your TOD waypoint you want this pause to engage. (Click to enlarge image) EFB Resuming Flight after Pause at TOD Once the Pause at TOD engages, you will see…

  15. Started by IniSteve,

    The iniBuilds Global Jet comes with a number of liveries made by our in-house artists for you to faithfully re-create your preferred owner/operator experience. These liveries are available for download via the iniManager directly into your sim's Community folder. IniManager - Installation & Setup New UsersDownload the latest version of iniManager from here. Log in using your iniBuilds Store account. Set your MSFS 2024 Community Packages Folder paths: a. Default Location: Press the 'Scan Now' button to run an automatic scan for the default Community folder path. b. Custom Location: Press the '...' button to manually navigate to your custom Community folder path. Don…

  16. Started by IniSteve,

    In MSFS 2024, 'Preflight Walkaround' is the default first phase of a flight when you start 'cold and dark' from a parking spot / ramp. Your pilot character spawns close to the currently selected aircraft, and it is possible to walk around and interact with various doors, panels and hatches. Exiting WalkaroundYou may exit the pre-flight walkaround at any time by clicking on the door handle or using the user-defined key bind for 'TAKE CONTROL OF CHARACTER' (Default: Shift+C). Control Settings - Keybind for Entering/Exiting 'Preflight' mode Walkaround InteractionsOn the iniBuilds Globa Jet for MSFS 2024 there are multiple doors, hatches and service panels that open conditio…

  17. Started by IniSteve,

    SYSTEM OVERVIEWThe EFB Maintenance page shows the condition of the aircraft's consumables, wear items and service history, and lets you service them. Each panel has a status indicator (such as Normal) and buttons for the related servicing. (click to enlarge) MAINTENANCE PAGE - CONTROLS AND INDICATORSOpen the Maintenance tab at the top of the EFB (next to Weight & Balance and Ground Services). The page has six panels: Engine Oil Oil Replenishment Landing Gear Lavatories General, Hours & Cycles Landings & Crew Oxygen Oil Quantity: Shows the oil level of each engine in quarts, with MIN (5.75 qt) and MAX (11.5 qt) markers. Refill Engine Oil: Fills both engines to…

  18. Started by IniSteve,

    The iniBuilds Global Jet allows for in-sim CPDLC connections for use with online networks such as Vatsim/IVAO as well as popular 3rd-party ATC programs such as BATC and Say Intentions. These connections are seamlessly integrated into the Multi-Function Display (MFD) pages and function to allow users to communicate with ATC via CPDLC. Setup - EFBTo set up your connection: Open the EFB and navigate to Settings > 3rd Party. Enter your - Hoppie Callsign in the designated field (this is your Hoppie Logon Code) or - Say Intentions API code in the corresponding field. These fields can be filled in manually using the on-screen keyboard, or you can paste your codes directly in…

  19. Started by IniSteve,

    Changing the Display Refresh Rate on your iniBuilds Global Jet helps your simulator performance and stability by adjusting how frequently the aircraft's system displays and cursor update on CPU-limited systems. (Click to enlarge image) How to Change the Display Refresh RateNavigate to Settings: Select Settings from the home page Select the Simulation Page: From the left-hand sidebar, choose Simulation. Locate Display Refresh Rate: Find the Display Refresh Rate drop-down selector in the settings list. Choose Your Preferred Rate: Click the drop-down and select from the three available options: 20 FPS - CPU-limited systems experiencing stutters or frame drops, where maximiz…

  20. Started by IniSteve,

    By popular demand, the IniBuilds Global Jet supports individual pop-out displays for the all DU screens. Each popped-out display remains fully interactive, allowing you to click, scroll, and operate them just as you would in the main cockpit view - perfect for multi-monitor or home cockpit setups. (Click to enlarge image) How to Pop-out a Screen?To pop out displays in MSFS 2024, hold the Right Alt key (or AltGr) and left-click directly on the center of any supported glass cockpit screen. (Click to enlarge image) (Click to enlarge image) The instrument opens in a separate, movable window that you can drag to a second monitor or resize. (Click to enlarge image)

  21. Started by IniSteve,

    Changing weight units in the Inibuilds Global Jet is possible by navigating to the EBF "Settings>EFB" page. The first option will contain a drop down toggle to allow switching between KG and Imperial units.

  22. Started by IniSteve,

    Panel Location and InitializationWhere is the external fuel panel located? The refuel/defuel door is situated on the leading edge of the right side of the wing-to-fuselage fairing. Opening this door gives you access to both the pressure refueling adapter and the fuel/defuel control panel. (Click to enlarge image) Common IssuesWhy isn't refueling starting immediately when I power the panel? Issue: You must wait a few seconds after powering up the panel before fueling can begin. At panel power-up, the Fuel Management Quantity Gauging Computer (FMQGC) automatically initiates a momentary built-in test. This test occurs regardless of the fueling mode you plan to use. You wi…

  23. Started by IniSteve,

    You can import a flight plan created in SimBrief straight into the FMS from the INIT page. This guide covers setting up your SimBrief Pilot ID and importing your route into the FMS. Setting Up SimBrief Import Check that your SimBrief Pilot ID (numbers only) is entered on the EFB>SETTINGS>3RD PARTY page. Click the SIMBRIEF USER ID text field, then type the ID with the On-Screen Keyboard. (click to enlarge) Note: Your SimBrief Pilot ID is on the Account Settings page of the SimBrief.com website. IMPORTING ROUTE INTO EFB In the EFB homepage, navigate to the FLIGHT INFO tab and click the SimBrief button. Observe the current plan has loaded (click to enlarge) IMPOR…

  24. The iniBuilds Global Jet EFB allows you to plan your entire flight, from departure to arrival, right from the cockpit using the EFB Flight Planner page. Accessing the Flight PlannerThe new planner has its own dedicated page which can be found on the EFB Flight Info section. (Click to enlarge image) Note: You must connect to your Navigraph account & enter your Simbrief User ID (numbers only) on the EFB 3rd Party Settings page in order to use this functionality. Creating a SimBrief Flightplan via the PlannerIn order to create your flight plan, only the following fields are mandatory FROM* - Input your Departure airport's 4-letter ICAO code here (e.g. LPFR) TO* - Input…

  25. SYSTEM OVERVIEWThe Electronic Checklist (ECL) is shown on the MFDs and accessed via the menu drop down. It displays Normal, Non-normal and Emergency checklists, and it automatically queues the checklists that match active CAS messages. Note:USER-DEFINED checklists functionality is not yet available on launch The feature is under active development for a future update. Thanks for your patience. ECL - CONTROLS AND INDICATORSINDEX: Opens the checklist categories: NORMAL, NON-NORMAL, EMERGENCY and USER-DEFINED. QUEUE: Lists the checklists for active CAS messages (for example, PASSENGER DOOR, OUTBD BRAKE LO PRESS and FDR FAIL). Page Counter: Shows the current page of the chec…

Account

Navigation

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.