Skip to content
View in the app

A better way to browse. Learn more.

iniBuilds Forum

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Help - How to input FLEX takeoff?

Featured Replies

  • Staff

HowTo_FlexTakeoff.png

The Inibuilds Global Jet simulates the Proline Fusion's FLEX takeoff mode where the FMS is given an assumed temperature higher than the actual Outside Air Temperature (OAT). The engines then produce less takeoff thrust, which reduces engine wear and fuel burn while still meeting runway and climb performance margins. This guide covers entering weight and balance data, setting up the departure performance page, and selecting FLEX thrust.

Weight and Balance – WT & BAL Page

  • Before the computer can calculate the correct FLEX parameters, you must first ensure the Weight & Balance (W&B) is filled out with the required information.

    image.png

Departure Performance – DEP PERF Page

  • Ensure the Departure page weather/runways parameters are properly input


FlightSimulator2024_Xc2FdJkDma.png

SETTING FLEX THRUST - DEP PERF PAGE (AIRCRAFT)

  • Set FLEX temp by clicking on the FLEX button under THRUST MODE

  • Enter the desired temperature rating desires

Note: The FLEX temperature must be higher than the actual OAT by 7°C or it will fail.

Example if OAT is 26c, then the chosen FLEX temp must be 33c or higher.

FlightSimulator2024_mdcErHUcvN.png

FLEX TAKEOFF - OPERATIONAL CONSTRAINTS

  • Maximum Thrust Reduction: Real world regulations usually limit FLEX thrust to no more than 25% below full rated takeoff thrust.

  • Prohibited Conditions: Do not use FLEX thrust when windshear is reported, when requiring takeoff anti-ice is or if runway performance necessitates full avail thrust

  • IniSteve changed the title to Help - How to input FLEX takeoff?
Guest
This topic is now closed to further replies.

Account

Navigation

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.