Skip to content
View in the app

A better way to browse. Learn more.

iniBuilds Forum

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Help - Why do I have a SPLR/STAB BIT cas message?

Featured Replies

  • Staff

Help_SPLR_CASMessage.png

During engine start, once the Hydraulics are fully pressurized, the Spoilers and Stab Trim systems perform a self test. While this test is running, a SPLRS/STAB IN TEST CAS message will appear. Moving the control surfaces during this test will cause the test to fail and generate a SPLRS/STAB BIT CAS message that requires a maintenance action to clear.


Resetting the Test

  1. Navigate to the EMS and pull the following circuit breakers:
    - FLT CTL 1 CH A
    - FLT CTL 1 CH B
    - FLT CTL 2 CH A
    - FLT CTL 2 CH B

    FlightSimulator2024_TPtG8QD3c5.jpg

  2. Wait 30 seconds, then re-enable all circuit breakers within 10 seconds of each other.

  3. From here, do not touch the flight controls or the trim switch for another 3 minutes to allow the self test to re-run.

  4. Once SPLRS/STAB BIT has cleared from the CAS, you may continue the normal after-start procedures.

Simulation Option

Should you wish to disable this behaviour, it can be turned off with the Realistic SPLR/STAB TEST option in the Simulation tab of the aircraft settings.

When disabled, the test will always pass regardless of control surface movement during the test period.

FlightSimulator2024_n32qShKzqX.jpg

Guest
This topic is now closed to further replies.

Account

Navigation

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.