Skip to content
View in the app

A better way to browse. Learn more.

iniBuilds Forum

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

How to - External Fuel Panel Management

Featured Replies

  • Staff

HowTo_ExternalFuelPanel.png


Panel Location and Initialization

Where is the external fuel panel located?

  • The refuel/defuel door is situated on the leading edge of the right side of the wing-to-fuselage fairing.

  • Opening this door gives you access to both the pressure refueling adapter and the fuel/defuel control panel.

20261119-1911-50.8662659.gif
(Click to enlarge image)

Common Issues

Why isn't refueling starting immediately when I power the panel?

  • Issue: You must wait a few seconds after powering up the panel before fueling can begin.

  • At panel power-up, the Fuel Management Quantity Gauging Computer (FMQGC) automatically initiates a momentary built-in test.

  • This test occurs regardless of the fueling mode you plan to use.

  • You will know the test is successful—and the panel is ready—when the individual tank and total fuel quantities appear on the panel display.

Does the panel drain the aircraft battery?

  • Yes, the panel draws power directly from the APU battery direct bus.

  • Issue: You must manually turn the panel off after use to prevent APU battery drain when the aircraft is unpowered.

Automatic Refuelling Mode

How do I use Automatic Mode?

  • Turn the Panel Switch to Refuel Auto and wait for the display to initialize. It will take a few seconds before current fuel displays and the inhibit is removed.

    image.png
    (Click to enlarge image)

How do I set my desired fuel amount?

  • Use the INCR/DECR (Increase/Decrease) switch on the panel to input your target quantity.

  • This entered value will display above the "PRESEL" (Preselect) text on the screen.

  • Common Issue: The preselect quantity represents the final total fuel quantity desired in the tanks, not the amount of fuel you are uploading.

image.png
(Click to enlarge image)

How does the Automatic transfer work once started?

  • Move the START - STOP/SOV TEST switch to the START position. Note this will flash START for ~10 seconds before fueling begins.

  • The FMQGC uses an internal load schedule to automatically distribute the fuel between tanks.

  • The system ensures the wing tanks are filled first, followed by the aft and center tanks.

  • The fueling operation will stop automatically once your preselected total is reached.

Manual Refueling/Defueling Mode

image.png
(Click to enlarge image)

When should I use Manual Mode?

  • The manual mode is used when you need a maximum upload (completely filling the tanks).

  • It also serves as a backup, allowing you to continue refueling if an error message inhibits the automatic mode.

How to Defuel or fuel a selected tank?

  • Move the Main Panel switch to Refuel/Defuel Manual and wait for the panel to initialize (~5 seconds)

  • Open the switch to the tank(s) you wish to refuel/defuel.

  • They will begin refueling/defueling after a few seconds

  • Return the respective tank to CLOSED once desired level is met and set main panel switch to OFF. Close Fairing Access Door.

Common Messages and Post-Refueling Procedures

What does the "INHIB" message mean?

  • "INHIB" means refueling is currently inhibited by the system.

  • This can occur due to an improper switch selection, a failed refueling shutoff valve (SOV), or if you preselected a fuel quantity that is lower than the actual fuel currently in the tanks.

What does the "FULL" message mean?

  • This message indicates that the high-level sensor has detected that the associated tank is full.

Is there anything I need to do after refueling is complete?

  • Turn off the main panel switch and close the fairing panel.

  • TylerW changed the title to How to - External Fuel Panel Management
Guest
This topic is now closed to further replies.

Account

Navigation

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.