<?xml version="1.0"?>
<rss version="2.0"><channel><title>FAQs Latest Topics</title><link>https://forum.inibuilds.com/forum/959-faqs/</link><description>FAQs Latest Topics</description><language>en</language><item><title>Help - How to input FLEX takeoff?</title><link>https://forum.inibuilds.com/topic/42228-help-how-to-input-flex-takeoff/</link><description><![CDATA[<p style="text-align:left;"><img class="ipsImage ipsRichText__align--block" data-fileid="30921" src="//cdn-forum.inibuilds.com/monthly_2026_11/HowTo_FlexTakeoff.png.7afbe0a41c36d18f5e9d97dc5f166fdc.png" alt="HowTo_FlexTakeoff.png" title="HowTo_FlexTakeoff.png" width="1000" height="200" loading="lazy"><br><br>The <strong>Inibuilds Global Jet </strong>simulates the Proline Fusion's FLEX takeoff mode where the FMS is given an assumed temperature higher than the actual Outside Air Temperature (OAT). The engines then produce less takeoff thrust, which reduces engine wear and fuel burn while still meeting runway and climb performance margins. This guide covers entering weight and balance data, setting up the departure performance page, and selecting FLEX thrust.</p><h4><strong>Weight and Balance – WT &amp; BAL Page</strong></h4><ul><li><p style="text-align:left;">Before the computer can calculate the correct FLEX parameters, you must first ensure the Weight &amp; Balance (W&amp;B) is filled out with the required information.</p><p></p><p style="text-align:center;"><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30843" src="//cdn-forum.inibuilds.com/monthly_2026_11/image.thumb.png.603943d3a3df260218e3221c6eaf0272.png" alt="image.png" title="image.png" width="508" height="750" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/image.png.0b1e9df8f5bc4f3136e4a790de6d4917.png" style="--i-media-width: 450px;" loading="lazy"><br></p></li></ul><h4><strong>Departure Performance – DEP PERF Page</strong></h4><ul><li><p>Ensure the Departure page weather/runways parameters are properly input</p></li></ul><p style="text-align:center;"><br><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30840" src="//cdn-forum.inibuilds.com/monthly_2026_11/FlightSimulator2024_Xc2FdJkDma.thumb.png.a70b951202b0f148f360346c015b468a.png" alt="FlightSimulator2024_Xc2FdJkDma.png" title="FlightSimulator2024_Xc2FdJkDma.png" width="563" height="750" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/FlightSimulator2024_Xc2FdJkDma.png.f9d5ee0d6b79d3cd0ec4a4d3ca8d8a30.png" style="--i-media-width: 450px;" loading="lazy"><br></p><h4><strong>SETTING FLEX THRUST - DEP PERF PAGE (AIRCRAFT)</strong></h4><ul><li><p>Set<strong> FLEX </strong>temp by clicking on the <code>FLEX</code> button under THRUST MODE</p></li><li><p>Enter the desired temperature rating desires<br></p></li></ul><details class="ipsRichTextBox ipsRichTextBox--expandable ipsRichText__no-index"><summary class="ipsRichTextBox__title"><p><strong><span data-i-color="red">Note:</span></strong> The FLEX temperature must be higher than the actual OAT by 7°C or it will fail.</p></summary><p>Example if OAT is 26c, then the chosen FLEX temp must be 33c or higher.</p></details><p style="text-align:center;"><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30841" src="//cdn-forum.inibuilds.com/monthly_2026_11/FlightSimulator2024_mdcErHUcvN.thumb.png.ada3b605f34b4459e48aa5a016dadf09.png" alt="FlightSimulator2024_mdcErHUcvN.png" title="" width="568" height="750" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/FlightSimulator2024_mdcErHUcvN.png.d1a76eb819a89663c8c0efff7f48b680.png" style="--i-media-width: 450px;" loading="lazy"></p><p></p><h4><strong>FLEX TAKEOFF - OPERATIONAL CONSTRAINTS</strong></h4><ul><li><p><strong>Maximum Thrust Reduction</strong>: Real world regulations usually limit FLEX thrust to no more than 25% below full rated takeoff thrust.</p></li><li><p><strong>Prohibited Conditions</strong>: Do not use FLEX thrust when windshear is reported, when requiring takeoff anti-ice is or if runway performance necessitates full avail thrust</p></li></ul>]]></description><guid isPermaLink="false">42228</guid><pubDate>Thu, 19 Nov 2026 06:58:06 +0000</pubDate></item><item><title>Help - Why is there a floating spoiler on the right wing?</title><link>https://forum.inibuilds.com/topic/42227-help-why-is-there-a-floating-spoiler-on-the-right-wing/</link><description><![CDATA[<p style="text-align:center;"><img class="ipsImage ipsRichText__align--block" data-fileid="30922" src="//cdn-forum.inibuilds.com/monthly_2026_11/Help_RightSpoiler.png.aba07808f553187636ded568f9f2f726.png" alt="Help_RightSpoiler.png" title="" width="1000" height="200" loading="lazy"></p><p>Keen-eyed pilots may have noticed a floating spoiler panel during walkaround.</p><p><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30861" src="//cdn-forum.inibuilds.com/monthly_2026_11/FlightSimulator2024_OdIgpWo4WA.thumb.jpg.cb35211bd9d59643abdd5f9732544d88.jpg" alt="FlightSimulator2024_OdIgpWo4WA.jpg" title="FlightSimulator2024_OdIgpWo4WA.jpg" style="--i-media-width: 637px;" width="1000" height="650" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/FlightSimulator2024_OdIgpWo4WA.jpg.bc7a00ec3c7f27c83679ffa1457eaa26.jpg" loading="lazy"></p><p>There is a common gremlin on Globals where a small bubble can form in the actuator for one of the spoilers. When this happens, the bubble can cause the spoiler to lift up slightly when the system is unpressurized. When the relevant hydraulic system for that spoiler is pressurized, the bubble is squashed and the spoiler panel will return to flush.</p><p>There is no pilot or maintenance action required.</p>]]></description><guid isPermaLink="false">42227</guid><pubDate>Thu, 19 Nov 2026 06:57:17 +0000</pubDate></item><item><title>Help - Why do I have a SPLR/STAB BIT cas message?</title><link>https://forum.inibuilds.com/topic/42226-help-why-do-i-have-a-splrstab-bit-cas-message/</link><description><![CDATA[<p style="text-align:center;"><img class="ipsImage ipsRichText__align--block" data-fileid="30923" src="//cdn-forum.inibuilds.com/monthly_2026_11/Help_SPLR_CASMessage.png.730d1a3cc74a453468a7be9fa25f28df.png" alt="Help_SPLR_CASMessage.png" title="Help_SPLR_CASMessage.png" width="1000" height="200" loading="lazy"></p><p>During engine start, once the Hydraulics are fully pressurized, the Spoilers and Stab Trim systems perform a self test. While this test is running, a <code>SPLRS/STAB IN TEST</code> CAS message will appear. Moving the control surfaces during this test will cause the test to fail and generate a <code>SPLRS/STAB BIT</code> CAS message that requires a maintenance action to clear.</p><h4><br>Resetting the Test</h4><ol><li><p>Navigate to the EMS and pull the following circuit breakers:<br>- FLT CTL 1 CH A<br>- FLT CTL 1 CH B<br>- FLT CTL 2 CH A<br>- FLT CTL 2 CH B<br><br><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30858" src="//cdn-forum.inibuilds.com/monthly_2026_11/FlightSimulator2024_TPtG8QD3c5.thumb.jpg.de0305edef8075594a1cb2a74ade78cd.jpg" alt="FlightSimulator2024_TPtG8QD3c5.jpg" title="FlightSimulator2024_TPtG8QD3c5.jpg" width="1000" height="568" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/FlightSimulator2024_TPtG8QD3c5.jpg.fb81170e2069fff82d7a5a8fe1ba9f6e.jpg" style="--i-media-width: 450px;" loading="lazy"><br></p></li><li><p>Wait 30 seconds, then re-enable all circuit breakers within 10 seconds of each other.</p></li><li><p>From here, <strong>do not touch the flight controls or the trim switch for another 3 minutes </strong>to allow the self test to re-run. </p></li><li><p>Once <code>SPLRS/STAB BIT</code> has cleared from the CAS, you may continue the normal after-start procedures.</p></li></ol><p></p><h4>Simulation Option</h4><p>Should you wish to disable this behaviour, it can be turned off with the <code>Realistic SPLR/STAB TEST</code> option in the Simulation tab of the aircraft settings.</p><p>When disabled, the test will always pass regardless of control surface movement during the test period.</p><p><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30859" src="//cdn-forum.inibuilds.com/monthly_2026_11/FlightSimulator2024_n32qShKzqX.thumb.jpg.0420eda2ae38b5014d99baf32b2f3612.jpg" alt="FlightSimulator2024_n32qShKzqX.jpg" title="FlightSimulator2024_n32qShKzqX.jpg" width="1000" height="730" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/FlightSimulator2024_n32qShKzqX.jpg.8633544d6bdbc3f5a6f7ac7a0d70cf48.jpg" style="--i-media-width: 450px;" loading="lazy"></p>]]></description><guid isPermaLink="false">42226</guid><pubDate>Thu, 19 Nov 2026 06:56:37 +0000</pubDate></item><item><title>How to - Audio Settings</title><link>https://forum.inibuilds.com/topic/42225-how-to-audio-settings/</link><description><![CDATA[<p><img class="ipsImage ipsRichText__align--block" data-fileid="30924" src="//cdn-forum.inibuilds.com/monthly_2026_11/HowTo_AudioSettings.png.dd62406e408d529fd4d82d03b2fca703.png" alt="HowTo_AudioSettings.png" title="" width="1000" height="200" loading="lazy"></p><p style="text-align:left;">The <strong>Audio settings</strong> page on the Electronic Flight Bag (EFB) allows you to fine-tune individual sound category volumes, enable specific sounds, control noise-cancelling and select your preferred cabin announcement language.</p><p style="text-align:left;">This page is accessed via <strong>EFB Settings</strong> &gt; <strong>Audio</strong>.</p><p style="text-align:center;"><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30800" src="//cdn-forum.inibuilds.com/monthly_2026_11/image.thumb.png.c0f266df080d100e205095b2fcad4bea.png" alt="image.png" title="" width="1000" height="709" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/image.png.5f5c1de6d4f305ad3520a02f8700a560.png" style="--i-media-width: 450px;" loading="lazy"> <img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30801" src="//cdn-forum.inibuilds.com/monthly_2026_11/image.thumb.png.d3147897ad6ddd2417ede7bc124e3b13.png" alt="image.png" title="" width="1000" height="709" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/image.png.8bd9c0f1e1e6d9701e1e9c2bb06d7bba.png" style="--i-media-width: 450px;" loading="lazy"> <br>(Click to enlarge image)</p><h4><strong>Volume Sliders</strong></h4><p>Each category below can be independently adjusted from <strong>0% to 100%</strong> using its respective slider:</p><div class="ipsRichText__table-wrapper"><table style="min-width: 669px;"><colgroup><col style="min-width:20px;"><col style="width:649px;"></colgroup><tbody><tr><th colspan="1" rowspan="1"><p><strong>Category</strong></p></th><th colspan="1" rowspan="1"><p><strong>Description</strong></p></th></tr><tr><td colspan="1" rowspan="1"><p><strong>Engines</strong></p></td><td colspan="1" rowspan="1"><p>Engine sounds volume overall - interior and exterior views.</p></td></tr><tr><td colspan="1" rowspan="1"><p><strong>Rattles</strong></p></td><td colspan="1" rowspan="1"><p>Various rattling sounds from cabin and galley fixtures.</p></td></tr><tr><td colspan="1" rowspan="1"><p><strong>Environment</strong></p></td><td colspan="1" rowspan="1"><p>Ambient and environmental sounds (wind, rain, airframe noise).</p></td></tr></tbody></table></div><p></p><div class="ipsRichTextBox ipsRichTextBox--alwaysopen"><div class="ipsRichTextBox__title"><p><strong><span data-i-color="red">Tip:</span></strong></p></div><p>Lowering Internal Engines slider can help improve callout and PA clarity during critical phases of flight. Adjust the sliders for what works best on your Audio/EQ setup.</p></div><p style="text-align:center;"><img class="ipsImage ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30802" src="//cdn-forum.inibuilds.com/monthly_2026_11/image.png.f8845f028102785e490bd802cfc99b25.png" alt="image.png" title="" width="492" height="220" style="--i-media-width: 350px;" loading="lazy"><br>(Click to enlarge image)</p><h4><strong>Audio Toggles</strong></h4><ul><li><p><strong>Noise Cancelling Headset</strong><br>Simulates the effect of a noise-cancelling headset, reducing ambient cockpit noise for clearer radio and callout audio.</p><div class="ipsRichTextBox ipsRichTextBox--alwaysopen"><div class="ipsRichTextBox__title"><p><strong><span data-i-color="red">Note:</span></strong></p></div><p>For this feature to function correctly, ensure Loudness Limiter and Headphone Simulation are disabled in your simulator's Settings &gt; General &gt; Sound menu.<br>For more information refer to <a rel="" href="https://forum.inibuilds.com/topic/40765-how-to-disable-loudness-limiter-headphone-simulation/"><strong>How to - Disable Loudness Limiter &amp; Headphone Simulation</strong></a>.</p></div><p></p></li><li><p><strong>Flap Volume </strong><br>Enhanced - Increases the volume of flap movement to be heard more clearly from the cockpit.<br>Authentic - Keeps flap movement volume at true-to-life levels as heard from the cockpit.</p><p></p></li><li><p><strong>Mute Cabin Announcements</strong><br>Mutes the simulated cabin announcements.</p></li></ul><p style="text-align:center;"><img class="ipsImage ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30803" src="//cdn-forum.inibuilds.com/monthly_2026_11/image.png.41e3c3908667b9238a335321724e4e98.png" alt="image.png" title="" width="492" height="220" style="--i-media-width: 350px;" loading="lazy"><br>(Click to enlarge image)</p>]]></description><guid isPermaLink="false">42225</guid><pubDate>Thu, 19 Nov 2026 06:56:04 +0000</pubDate></item><item><title>How to - EFB Show/Hide and Position Adjustment</title><link>https://forum.inibuilds.com/topic/42224-how-to-efb-showhide-and-position-adjustment/</link><description><![CDATA[<p style="text-align:center;"><img class="ipsImage ipsRichText__align--block" data-fileid="30925" src="//cdn-forum.inibuilds.com/monthly_2026_11/HowTo_EFBShowHidePositionAdjustment.png.81f899897c0ab53f92e4cbcfa3ecb2a5.png" alt="HowTo_EFBShowHidePositionAdjustment.png" title="" width="1000" height="200" loading="lazy"></p><h4><strong>Showing / Hiding the EFB</strong></h4><p>Click on the <strong>Cover Panel</strong> located on the <strong>Pilot Side Console</strong> on either the <strong>Captain (CPT)</strong> or <strong>First Officer (FO)</strong> side, to show or hide the respective EFB tablet holder.</p><p style="text-align:center;"><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30815" src="//cdn-forum.inibuilds.com/monthly_2026_11/Global_EFB_Show_Hide.thumb.gif.d8f3b4d9ee1205649a68f8f4e4941e81.gif" alt="Global_EFB_Show_Hide.gif" title="Global_EFB_Show_Hide.gif" style="--i-media-width: 500px;" width="1443" height="968" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/Global_EFB_Show_Hide.gif.12c578adb4cfc1afe6ffc9cbec7b292e.gif" loading="lazy"><br>(Click to enlarge image)</p><h4><strong>Adjusting EFB Position (Tilt, Pan and Rotate)</strong></h4><ol><li><p>Open <strong>EFB &gt; Settings &gt; EFB &gt; EFB Position Adjustment</strong>.</p></li><li><p>A pop-up window will appear with an adjustment area.</p></li><li><p><strong>Click and drag</strong> or <strong>Scroll wheel</strong> with your mouse within the white box to adjust the Tablet Holder and Mount:</p><ul><li><p><strong>Left-Right Movement (Click &amp; Drag) </strong>— <strong>Pans</strong> the base holder arm</p></li><li><p><strong>Up-Down Movement (Click &amp; Drag) </strong>— <strong>Rotates</strong> the<strong> </strong>tablet mount</p></li><li><p><strong>Up-Down Movement (Scroll wheel) </strong>— <strong>Tilts</strong> the<strong> </strong>tablet mount</p></li></ul></li><li><p>Once satisfied with the position, click <strong>Done</strong> to confirm.</p></li><li><p>Click <strong>Reset</strong> at any time to restore the default position.</p></li></ol><p style="text-align:center;"><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30822" src="//cdn-forum.inibuilds.com/monthly_2026_11/Global_EFB_Adjust.thumb.gif.e77fb8d805a56bd9c33cae20a129b485.gif" alt="Global_EFB_Adjust.gif" title="Global_EFB_Adjust.gif" style="--i-media-width: 500px;" width="1158" height="884" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/Global_EFB_Adjust.gif.ed7c0b48d17cf2faad0a7a664bbf0147.gif" loading="lazy"><br>(Click to enlarge image)</p><p style="text-align:center;"></p><div class="ipsRichTextBox ipsRichTextBox--alwaysopen"><div class="ipsRichTextBox__title"><p><span data-i-color="red">Note: </span>The EFB Position is saved as part of persistence data.</p></div><p style="text-align:left;">If you have Plane Peristence enabled under Simulation Settings on the EFB, then the tablet position is also saved per airframe when you quit a session.</p></div>]]></description><guid isPermaLink="false">42224</guid><pubDate>Thu, 19 Nov 2026 06:55:18 +0000</pubDate></item><item><title>How to - Cabin Attendant Panel (CAP) Operation</title><link>https://forum.inibuilds.com/topic/42223-how-to-cabin-attendant-panel-cap-operation/</link><description><![CDATA[<p style="text-align:center;"><img class="ipsImage ipsRichText__align--block" data-fileid="30927" src="//cdn-forum.inibuilds.com/monthly_2026_11/HowTo_CabinAttendantPanel.png.05a9a157731ba5297271724534cd73fb.png" alt="HowTo_CabinAttendantPanel.png" title="" width="1000" height="200" loading="lazy"></p><h4><strong>SYSTEM OVERVIEW</strong></h4><ul><li><p><strong>CAP</strong> – Cabin Attendant Panel (iniFE Crew Control)</p></li></ul><p>The Cabin Attendant Panel controls the cabin: lighting, window shades, reading lights, temperature, music, passenger service and galley stock. This guide covers each tab of the panel and what its controls do.</p><h4><strong>CABIN ATTENDANT PANEL - CONTROLS AND INDICATORS</strong></h4><ol><li><p><strong>Header</strong>: Shows the destination, the time to destination and the local time at the destination.</p></li><li><p><strong>Status Bar</strong>: Shows the cabin connection status, pending requests and the cabin service mode.</p></li><li><p><strong>Main Tabs</strong>- <strong>At-a-Glance</strong>, <strong>Service</strong>, <strong>Cabin</strong>, <strong>Ambience</strong> and <strong>Galley</strong>.</p></li><li><p><strong>Quick Action Bar</strong>: <strong>Overview</strong>, <strong>Reading</strong>, <strong>Shades</strong>, <strong>Audio</strong> and <strong>Screen off</strong>.</p></li></ol><p style="text-align:center;"><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30854" src="//cdn-forum.inibuilds.com/monthly_2026_11/image.thumb.png.441bbdbad58f53b87134d45db3ac2182.png" alt="image.png" title="" style="--i-media-width: 695px;" width="1000" height="601" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/image.png.ee3740969a6dc94fa46249c52bed73e1.png" loading="lazy"></p><h4><strong>At-a-Glance</strong></h4><ul><li><p><strong>Cabin Preview</strong>: Shows the status of the common lighting and star ceiling, and the current lighting scene. <strong>Lighting controls</strong> opens the Cabin tab.</p></li><li><p><strong>Call Map</strong>: Shows passenger assistance calls and the automatic service timer. <strong>Open service queue</strong> opens the Service tab.</p></li><li><p><strong>Climate &amp; Cabin</strong>: Shows the FWD and AFT cabin temperatures (target and current, in °C or °F), the window shade status with <strong>Open all</strong> / <strong>Close all</strong>, the number of reading lights on with <strong>Individual lights</strong>, and the cabin table status.</p></li></ul><h4><strong>SETTING CABIN LIGHTING - CABIN TAB</strong></h4><ul><li><p><strong>Scenes</strong>: Choose a preset cabin scene: <strong>Boarding</strong>, <strong>Cruise</strong>, <strong>Rest</strong>, <strong>Take-off / Landing</strong> or <strong>All off</strong>. The current scene is shown at the bottom left.</p></li><li><p><strong>Lighting Zones</strong>: Set the <strong>Common lighting</strong> and <strong>Star ceiling</strong> brightness (%) and turn each on or off.</p></li><li><p><strong>Cabin Themes</strong>: Choose a lighting theme: <strong>Night</strong>, <strong>Dawn &amp; dusk</strong>, <strong>Golden hour</strong> or <strong>Day</strong>.</p></li><li><p><strong>Ambient Lighting</strong>: Choose <strong>Off</strong>, <strong>Default</strong> or <strong>Mood</strong>, then set the <strong>Ambient lightness</strong> (%).</p></li><li><p><strong>Ceiling Colour / Walls &amp; Trim Colour</strong>: Choose a color for each area from the palette.</p><p style="text-align:center;"><br><br><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30855" src="//cdn-forum.inibuilds.com/monthly_2026_11/image.thumb.png.18e3c6b3bf052222cff467df2b8574e5.png" alt="image.png" title="" style="--i-media-width: 702px;" width="1000" height="600" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/image.png.05adb557df4aae4b94aa2af3001012af.png" loading="lazy"></p></li></ul><p style="text-align:center;"></p><h4><strong>CONTROLLING WINDOW SHADES - CABIN TAB</strong></h4><ul><li><p><strong>Open all / Close all</strong>: Opens or closes all 24 window shades.</p><ul><li><p>You may also click to select an individual window and control it's position.</p></li></ul></li><li><p><strong>Random</strong>: Sets each shade to a random position.</p></li><li><p><strong>Open / Closed / Shade Position</strong>: Opens, closes or sets the position (%) of the selected window</p><p style="text-align:center;"></p><p style="text-align:center;"><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30856" src="//cdn-forum.inibuilds.com/monthly_2026_11/image.thumb.png.f6ebf045c80db9dd455be4b83f608b61.png" alt="image.png" title="" style="--i-media-width: 708px;" width="1000" height="605" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/image.png.0dfb89a29a23ab5f83cf1eb03e9d695a.png" loading="lazy"></p></li></ul><h4><strong>CONTROLLING READING LIGHTS - CABIN TAB</strong></h4><ul><li><p><strong>All on / All off</strong>: Turns all 18 reading lights on or off.</p></li><li><p><strong>Overall Reading Light Brightness</strong>: Sets the brightness (%) for every reading light.</p><ul><li><p><strong>Note:</strong> All reading lights share the same brightness setting.</p></li></ul></li><li><p><strong>Cabin Map</strong>: Tap a seat or table to turn its individual reading light on or off.</p></li></ul><p style="text-align:center;"><br><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30857" src="//cdn-forum.inibuilds.com/monthly_2026_11/image.thumb.png.9a1bdd78e02f028fcccb84d401ee3c63.png" alt="image.png" title="" style="--i-media-width: 729px;" width="1000" height="603" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/image.png.7a616415ba60edc6533227b4e43ad3bf.png" loading="lazy"></p><h4><strong>SETTING CABIN TEMPERATURE - CABIN TAB</strong></h4><ul><li><p><strong>FWD / AFT Cabin Temp</strong>: Set the target temperature for each zone with <strong>–</strong> and <strong>+</strong>. The current measured temperature is shown next to it.</p></li><li><p><strong>°C / °F</strong>: Switches the temperature units.</p></li><li><p><strong>Window shade controls</strong>: Opens the window shades page.</p></li></ul><p><strong>Note:</strong> The FWD and AFT targets are set independently and are sent to the Environmental Control System (ECS).</p><p style="text-align:center;"><br><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30860" src="//cdn-forum.inibuilds.com/monthly_2026_11/image.thumb.png.968a8524570e8915aa596c8e8cfd0d7b.png" alt="image.png" title="" style="--i-media-width: 730px;" width="1000" height="610" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/image.png.5a1acce63c15f2abebb636dee616153c.png" loading="lazy"></p><h4><strong>PLAYING CABIN MUSIC - AMBIENCE TAB</strong></h4><ul><li><p><strong>Music Selection</strong>: Choose from five original instrumental pieces.</p></li><li><p><strong>Audio Controls</strong>: Previous, stop/play and next track, with playback progress.</p></li><li><p><strong>Cabin Volume</strong>: Sets the music volume (%) for the whole cabin.</p></li></ul><p style="text-align:center;"><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30862" src="//cdn-forum.inibuilds.com/monthly_2026_11/image.thumb.png.4651ba278b47fe34b5f3e8ec9f67a5bc.png" alt="image.png" title="" style="--i-media-width: 719px;" width="1000" height="599" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/image.png.65e9cc2d3426fea1ebb916a906d1111d.png" loading="lazy"></p><h4><strong>MANAGING CABIN SERVICE - SERVICE TAB</strong></h4><ul><li><p><strong>Live queue / History</strong>: Shows current passenger orders and calls, or past ones.</p></li><li><p><strong>Service Queue</strong>: Lists new orders and calls from the cabin and the flight deck.</p></li><li><p><strong>Service Status</strong>: Shows the service mode (<strong>Automatic service</strong>), its scope (<strong>Whole cabin</strong>) and the number of orders <strong>Preparing</strong> and <strong>Served on tables</strong>.</p></li><li><p><strong>Manage available menu</strong>: Opens the Galley tab.</p></li></ul><p><strong>Note:</strong> With automatic service, orders are served 10 seconds after they are received.</p><p style="text-align:center;"><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30863" src="//cdn-forum.inibuilds.com/monthly_2026_11/image.thumb.png.02f4b8ba9f9a86a5c0a7f87c29d9ce50.png" alt="image.png" title="" style="--i-media-width: 712px;" width="1000" height="604" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/image.png.ee11680162c35309c6fcd0c06452d888.png" loading="lazy"></p><h4><strong>MANAGING GALLEY STOCK - GALLEY TAB</strong></h4><ul><li><p><strong>Food / Drinks</strong>: Switches between the food and drink menus.</p></li><li><p><strong>Menu Items</strong>: Shows how many of each item remain. Use the <strong>Available</strong> toggle to choose whether it appears on the passenger menu.</p></li><li><p><strong>Re-stock / Refill</strong>: Restocks the galley. The current stock status (such as <strong>Galley fully stocked</strong>) is shown next to it.</p></li></ul><p style="text-align:center;"><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30865" src="//cdn-forum.inibuilds.com/monthly_2026_11/image.thumb.png.6449b5fe697cc0af5e57570d22404716.png" alt="image.png" title="" style="--i-media-width: 703px;" width="1000" height="607" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/image.png.64c27b1843844f3fb0f908837df9516f.png" loading="lazy"></p><h4><strong>RESET / DEFAULT SETTINGS</strong></h4><ul><li><p><strong>All off</strong>: Turns off all cabin and reading lights.</p></li><li><p><strong>Screen off</strong>: Turns off the Cabin Attendant Panel display.</p></li></ul>]]></description><guid isPermaLink="false">42223</guid><pubDate>Thu, 19 Nov 2026 06:45:50 +0000</pubDate></item><item><title>How to - Passenger Tablet (iniFE) Operation</title><link>https://forum.inibuilds.com/topic/42222-how-to-passenger-tablet-inife-operation/</link><description><![CDATA[<p style="text-align:center;"><img class="ipsImage ipsRichText__align--block" data-fileid="30928" src="//cdn-forum.inibuilds.com/monthly_2026_11/HowTo_PassengerTablet.png.3634887bc8d48626aea7a92182c4bb62.png" alt="HowTo_PassengerTablet.png" title="HowTo_PassengerTablet.png" width="1000" height="200" loading="lazy"></p><h4><strong>SYSTEM OVERVIEW</strong></h4><p>The Passenger Tablet (<strong>iniFE</strong>) on the <strong>iniBuilds Global Jet</strong> lets passengers follow the flight, adjust the cabin atmosphere, order food and drinks, play cabin music and call the crew. This guide covers each tab of the tablet and what its controls do.</p><h4><strong>PASSENGER TABLET - CONTROLS AND INDICATORS</strong></h4><ol><li><p><strong>Header</strong>: Shows the route (such as <strong>Lihue → Van Nuys</strong>), the time to arrival and the cabin connection status.</p></li><li><p><strong>Main Tabs</strong>: <strong>Home</strong>, <strong>Comfort</strong>, <strong>Dining</strong>, <strong>Ambience</strong> and <strong>My flight</strong>.</p></li><li><p><strong>Media Bar</strong>: Shows the current track, with previous, play/stop and next controls, <strong>Quick controls</strong> and <strong>Crew call button</strong>.</p></li></ol><p style="text-align:center;"><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30867" src="//cdn-forum.inibuilds.com/monthly_2026_11/image.thumb.png.433b489c6e6d2f793da51bdfedb741bc.png" alt="image.png" title="image.png" width="1000" height="707" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/image.png.6a6f2013b81ceed213ac8c38a69af12c.png" style="--i-media-width: 450px;" loading="lazy"><br>(Click to enlarge image)</p><h4><strong>Home</strong></h4><ul><li><p><strong>Your Journey</strong>: Shows the route map and the time to arrival. <strong>Explore your flight</strong> opens the My flight tab.</p></li><li><p><strong>Cabin Dining</strong>: <strong>Choose food &amp; drinks</strong> opens the Dining tab.</p></li><li><p><strong>Cabin Comfort</strong>: Shows the FWD/AFT cabin temperatures.</p></li><li><p><strong>Ambience</strong>: <strong>Find your calm</strong> opens the Ambience tab.</p></li><li><p><strong>At Your Service</strong>: <strong>Call your crew</strong> sends a call to the cabin crew.</p></li></ul><p></p><h4><strong>FOLLOWING THE FLIGHT - MY FLIGHT TAB</strong></h4><ul><li><p><strong>Departure</strong>: Shows the route and the time to destination.</p></li><li><p><strong>Flight Map</strong>: Shows the aircraft's position along the route. Use <strong>+</strong> / <strong>–</strong> to zoom.</p></li><li><p><strong>Flight Data</strong>: Shows the <strong>Altitude</strong> (ft), <strong>Ground speed</strong> (kt) and <strong>Distance remaining</strong> (nm).</p></li></ul><p style="text-align:center;"><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30868" src="//cdn-forum.inibuilds.com/monthly_2026_11/image.thumb.png.e5eb868ac407f2d93d025366ab85c9a5.png" alt="image.png" title="image.png" width="1000" height="688" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/image.png.78e56672f8ba318701ba342df5c20fef.png" style="--i-media-width: 450px;" loading="lazy"><br>(Click to enlarge image)</p><h4><strong>SETTING THE ATMOSPHERE - COMFORT TAB</strong></h4><ul><li><p><strong>Scenes</strong>: Choose a preset cabin scene: <strong>Boarding</strong>, <strong>Cruise</strong>, <strong>Rest</strong>, <strong>Take-off / Landing</strong> or <strong>All off</strong>.</p></li><li><p><strong>Lighting Zones</strong>: Turn the <strong>Common lighting</strong> and <strong>Star ceiling</strong> on or off and set their brightness (%).</p></li><li><p><strong>Ambient Lighting</strong>: Choose <strong>Off</strong>, <strong>Default</strong> or <strong>Mood</strong>, set the <strong>Ambient lightness</strong> (%), and choose the <strong>Ceiling</strong> and <strong>Walls &amp; trim</strong> colors.</p></li><li><p><strong>Reading Lights</strong>: Shows how many reading lights are on, and opens the reading light controls.</p></li><li><p><strong>Climate &amp; Shades</strong>: Shows the FWD/AFT cabin temperatures and the shade status, and opens their controls.</p></li></ul><p style="text-align:center;"><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30869" src="//cdn-forum.inibuilds.com/monthly_2026_11/image.thumb.png.f2ac0dcf00ba1da7caecaffc7f0ab78c.png" alt="image.png" title="image.png" width="1000" height="688" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/image.png.17310b5ddbf5fceb1df19e39c6c4fce8.png" style="--i-media-width: 450px;" loading="lazy"><br>(Click to enlarge image)</p><h4><strong>ORDERING FOOD AND DRINKS - DINING TAB</strong></h4><ul><li><p><strong>Step 1 – Food</strong>: Choose from the food options, or select <strong>No food</strong>. Use <strong>&lt;</strong> / <strong>&gt;</strong> to page through the menu. Select <strong>Continue to drinks</strong>.</p></li><li><p><strong>Step 2 – Drink</strong>: Choose from the drink options, or select <strong>No drink</strong>. Select <strong>Review selection</strong>.</p></li><li><p><strong>Step 3 – Review</strong>: Check your selection. Use <strong>Change food</strong> / <strong>Change drink</strong> to edit it, or <strong>Back</strong> to go back a step. Select <strong>Finish</strong> to send the order.</p></li></ul><p><strong>Note:</strong> Only items marked <strong>Available</strong> in the Cabin Attendant Panel's Galley tab appear on the menu. Orders apply to the whole cabin.</p><p style="text-align:center;"><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30870" src="//cdn-forum.inibuilds.com/monthly_2026_11/image.thumb.png.44825085afcdc675a20352fd71233825.png" alt="image.png" title="image.png" width="1000" height="690" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/image.png.ed3aebc47602563bb412b1723b69b4fb.png" style="--i-media-width: 450px;" loading="lazy"><br>(Click to enlarge image)</p><h4><strong>CALLING THE CREW - MEDIA BAR</strong></h4><ul><li><p><strong>Call crew</strong>: Sends a call to the cabin crew. Press it again to cancel the call. <strong>Crew call cancelled</strong> is shown when you do.</p></li><li><p><strong>Quick controls</strong>: Opens quick access to the cabin controls.</p></li></ul><h4><strong>PLAYING CABIN MUSIC - AMBIENCE TAB / MEDIA BAR</strong></h4><ul><li><p><strong>Track Controls</strong>: Previous, play/stop and next track, with the track name and playback time shown in the media bar.</p></li></ul><p style="text-align:center;"><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30871" src="//cdn-forum.inibuilds.com/monthly_2026_11/image.thumb.png.e94302cd05f35af8055fcabbff08b3ae.png" alt="image.png" title="image.png" width="1000" height="682" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/image.png.fc4080587e92f9d4398f6f26b1ae8037.png" style="--i-media-width: 450px;" loading="lazy"><br>(Click to enlarge image)</p>]]></description><guid isPermaLink="false">42222</guid><pubDate>Thu, 19 Nov 2026 06:45:07 +0000</pubDate></item><item><title><![CDATA[How to - Step Climbs - Auto/Manual - Setup & Operation]]></title><link>https://forum.inibuilds.com/topic/42221-how-to-step-climbs-automanual-setup-operation/</link><description><![CDATA[<p style="text-align:center;"><img class="ipsImage ipsRichText__align--block" data-fileid="30919" src="//cdn-forum.inibuilds.com/monthly_2026_11/HowTo_StepClimbs.png.87723af83cc407371ccc2e3aba4c207f.png" alt="HowTo_StepClimbs.png" title="HowTo_StepClimbs.png" width="1000" height="200" loading="lazy"></p><p>On the <strong>iniBuilds Global Jet</strong> you can enter planned step climbs directly on the <strong>FMS ROUTE</strong> page using the following formats:</p><ul><li><p><code>/F470S</code></p></li><li><p><code>/FL470S</code></p></li><li><p><code>/47000S</code></p></li></ul><p style="text-align:center;"><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30879" src="//cdn-forum.inibuilds.com/monthly_2026_11/StepClimbroutepage.thumb.gif.a04acd814822cf204f5c4cd2f471d493.gif" alt="Step Climb route page.gif" title="Step Climb route page.gif" width="800" height="1135" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/StepClimbroutepage.gif.eba8c9d392a09e768401c60a6c82b102.gif" style="--i-media-width: 350px;" loading="lazy"><br>(Click to enlarge image)</p><p>A summary of planned step climbs, an optimum step climb finder, and an immediate step climb performance calculator can be found in the VNAV page, CRZ tab.</p><p style="text-align:center;"><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30878" src="//cdn-forum.inibuilds.com/monthly_2026_11/stepclimbvnavpage.thumb.gif.e17c85368c1f127f9a020055932f0c21.gif" alt="step climb vnav page.gif" title="step climb vnav page.gif" width="800" height="1159" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/stepclimbvnavpage.gif.407c1c9a2a620ff8a1bd89f14da66bcd.gif" style="--i-media-width: 350px;" loading="lazy"><br>(Click to enlarge image)</p><h4>Auto Step Climb</h4><p>The Auto-Step Climb function will automatically adjust the autopilot to fly planned step-climbs entered into the flightplan as described above. It will automatically increase the altitude in the FCU, engage FLC mode, and allow the plane to level off at the new altitude. It will also cancel any step climbs that are above the MAX ALT calculated by the FMS in order to prevent the aircraft from stalling or attempting to climb to an altitude it cannot reach.</p><p>This function can be enabled in the EFB Settings -&gt; Simulation tab.</p><p style="text-align:center;"><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30881" src="//cdn-forum.inibuilds.com/monthly_2026_11/FlightSimulator2024_tTRQUYZdWH.thumb.jpg.4399f51c66643f011f6539f22dd1e9cd.jpg" alt="FlightSimulator2024_tTRQUYZdWH.jpg" title="FlightSimulator2024_tTRQUYZdWH.jpg" width="1000" height="742" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/FlightSimulator2024_tTRQUYZdWH.jpg.1cc066ea326761372a84fbb76fc2452b.jpg" style="--i-media-width: 450px;" loading="lazy"><br>(Click to enlarge image)</p>]]></description><guid isPermaLink="false">42221</guid><pubDate>Thu, 19 Nov 2026 06:44:14 +0000</pubDate></item><item><title>How to - Pause at Top of Descent (TOD)</title><link>https://forum.inibuilds.com/topic/42220-how-to-pause-at-top-of-descent-tod/</link><description><![CDATA[<p style="text-align:center;"><img class="ipsImage ipsRichText__align--block" data-fileid="30931" src="//cdn-forum.inibuilds.com/monthly_2026_11/HowTo_PauseTOD.png.5f84ccd63c3baf4eaa59d85798aab556.png" alt="HowTo_PauseTOD.png" title="" width="1000" height="200" loading="lazy"></p><p>The <strong>iniBuilds Global Jet</strong> features the option to automatically pause your simulator at a user customizable distance prior to your Top of Descent (TOD) pseudo waypoint. This is useful for when you intend to leave you simulator unsupervised but do not wish to miss out the fun of descending into your destination.</p><p style="text-align:center;"><br><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30809" src="//cdn-forum.inibuilds.com/monthly_2026_11/20261120015530_1.thumb.jpg.0ecb64e2b62a276d5a2b859ae16b0549.jpg" alt="20261120015530_1.jpg" title="20261120015530_1.jpg" style="--i-media-width: 450px;" width="1000" height="562" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/20261120015530_1.jpg.16367366ad890bfd3f18585c462e95ec.jpg" loading="lazy"> <br>(Click to enlarge image)</p><h5><strong>EFB Pause at TOD Option</strong></h5><p>You can enable the option to automatically <strong>Pause at TOD</strong> from the <strong>EFB Simulation Settings</strong> page. Here you can also set the custom distance (in NM) for when before your TOD waypoint you want this pause to engage.</p><p style="text-align:center;"><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30813" src="//cdn-forum.inibuilds.com/monthly_2026_11/image.thumb.png.f42ba301396b9554b10450b17c9e3dd8.png" alt="image.png" title="image.png" style="--i-media-width: 450px;" width="1000" height="711" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/image.png.cec75e951adf59f081d8dcf1d76261bb.png" loading="lazy"><br>(Click to enlarge image)</p><h5><strong>EFB Resuming Flight after Pause at TOD</strong></h5><p> Once the Pause at TOD engages, you will see a <strong>PAUSED AT TOD</strong> message on your PFD.</p><p style="text-align:center;"><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30810" src="//cdn-forum.inibuilds.com/monthly_2026_11/20261120015707_1.thumb.jpg.f88d4667ba9010b7aa944d928a25c249.jpg" alt="20261120015707_1.jpg" title="20261120015707_1.jpg" style="--i-media-width: 450px;" width="1000" height="562" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/20261120015707_1.jpg.87c089be4aa55fa0b1f9041cde39be9c.jpg" loading="lazy"><br>(Click to enlarge image)</p><p>Additionally you will see a <strong>TOP OF DESCENT PAUSE</strong> notification on the <strong>EFB</strong> screen. To resume your flight, simply press the <strong>RESUME FLIGHT</strong> button on the EFB.</p><p style="text-align:center;"><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30811" src="//cdn-forum.inibuilds.com/monthly_2026_11/image.thumb.png.b29ab8eb1a2a03933a5e7dbdfeba5365.png" alt="image.png" title="image.png" style="--i-media-width: 450px;" width="1000" height="711" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/image.png.ff68cb72ba444f3d677fb27448221dd4.png" loading="lazy"><br>(Click to enlarge image)</p>]]></description><guid isPermaLink="false">42220</guid><pubDate>Thu, 19 Nov 2026 06:43:28 +0000</pubDate></item><item><title>How to - Install liveries via iniManager</title><link>https://forum.inibuilds.com/topic/42219-how-to-install-liveries-via-inimanager/</link><description><![CDATA[<p><img class="ipsImage ipsRichText__align--block" data-fileid="30933" src="//cdn-forum.inibuilds.com/monthly_2026_11/HowTo_InstallLiveries.png.121e4723d17a72cb0b959224652fc4b8.png" alt="HowTo_InstallLiveries.png" title="" width="1000" height="200" loading="lazy"></p><p>The <strong>iniBuilds Global Jet </strong>comes with a number of liveries made by our in-house artists for you to faithfully re-create your preferred owner/operator experience. These liveries are available for download via the <strong>iniManager</strong> directly into your sim's Community folder.</p><p><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block" data-fileid="30958" src="//cdn-forum.inibuilds.com/monthly_2026_11/image.thumb.png.c38599a08ffb7b941aa1b9589de8b4cf.png" alt="image.png" title="" width="1000" height="562" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/image.png.ce7d24bf86bed82eb360ce14b69abcd7.png" loading="lazy"></p><h4><strong>IniManager - Installation &amp; Setup</strong><br><strong>New Users</strong></h4><ol><li><p>Download the latest version of iniManager from <a rel="external nofollow" href="https://inibuilds.com/pages/inimanager-v2">here.</a></p></li><li><p>Log in using your iniBuilds Store account.</p></li><li><p>Set your <strong>MSFS 2024 Community Packages Folder</strong> paths:<br>a. <strong>Default Location:</strong> Press the '<strong>Scan Now</strong>' button to run an automatic scan for the <strong>default</strong> Community folder path. <br>b. <strong>Custom Location:</strong> Press the '<strong>...</strong>' button to manually navigate to your <strong>custom</strong> Community folder path.</p><p style="text-align:left;"><img class="ipsImage ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="22746" src="//cdn-forum.inibuilds.com/monthly_2025_10/image.png.f0a59e9d387cf55c5dae553779473142.png" alt="image.png.f0a59e9d387cf55c5dae553779473142.png" title="image.png.f0a59e9d387cf55c5dae553779473142.png" width="1000" height="620" style="--i-media-width: 350px;" loading="lazy"></p></li><li><p>Done! You may now download your desired products and liveries.</p></li></ol><h4><br><strong>iniManager - Liveries Management<br>Accessing Liveries</strong></h4><ol><li><p>Open the iniManager</p></li><li><p>Select the '<strong>Liveries'</strong> from the sidebar<br><img class="ipsImage ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="17353" src="//cdn-forum.inibuilds.com/monthly_2025_02/image.png.bec6518571ce9c9fe86393cab70f6b55.png" alt="image.png.bec6518571ce9c9fe86393cab70f6b55.png" title="image.png.bec6518571ce9c9fe86393cab70f6b55.png" width="261" height="699" style="--i-media-width: 150px;" loading="lazy"><br> </p></li><li><p>Select the '<strong>Global Jet MSFS 2024'</strong><br><img class="ipsImage ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30954" src="//cdn-forum.inibuilds.com/monthly_2026_11/image.png.8857efda7ece68eb8eb7e27392273f0d.png" alt="image.png" title="" width="448" height="110" style="--i-media-width: 350px;" loading="lazy"><br></p></li><li><p>Find your desired livery from the list. You may use the '<strong>Filters</strong>' or '<strong>Search Liveries</strong>' section at the top-right corner.<br><img class="ipsImage ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="17360" src="//cdn-forum.inibuilds.com/monthly_2025_02/image.png.03dac18dbbd5eb308b8d2753347d628f.png" alt="image.png.03dac18dbbd5eb308b8d2753347d628f.png" title="image.png.03dac18dbbd5eb308b8d2753347d628f.png" width="382" height="64" style="--i-media-width: 350px;" loading="lazy"></p></li></ol><h4><strong>Installing Liveries</strong></h4><ol><li><p>Click the '<strong>Install</strong>' button on the desired livery.<br><img class="ipsImage ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30955" src="//cdn-forum.inibuilds.com/monthly_2026_11/image.png.b2198e55861f4ebc099ca74968ceef51.png" alt="image.png" title="" width="579" height="316" style="--i-media-width: 350px;" loading="lazy"><br></p></li><li><p>Read the disclaimer and press '<strong>I Understand</strong>' button.<br><img class="ipsImage ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="17355" src="//cdn-forum.inibuilds.com/monthly_2025_02/image.png.f9bb0c4503547db0bb36e4e20246a085.png" alt="image.png.f9bb0c4503547db0bb36e4e20246a085.png" title="image.png.f9bb0c4503547db0bb36e4e20246a085.png" width="612" height="220" style="--i-media-width: 350px;" loading="lazy"><br> </p></li><li><p>Wait for the download to complete. You can see the status of your download via the <strong>Active Downloads</strong> icon on the top right corner.<br><br><img class="ipsImage ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30956" src="//cdn-forum.inibuilds.com/monthly_2026_11/image.png.134073d0a54dddf477ee1cb307d2a995.png" alt="image.png" title="" width="618" height="357" style="--i-media-width: 350px;" loading="lazy"><br> </p><blockquote class="ipsQuote" cite="" data-ipsquote=""><div class="ipsQuote_contents" data-ipstruncate=""><p><strong><span data-i-color="red">Note</span></strong><span data-i-color="red">:</span> <strong>Your download will be queued in case there is already an active download running</strong>. You may queue multiple liveries at once for download.</p></div></blockquote><p></p></li><li><p>Done! You may now close the iniManager.</p></li></ol><p style="text-align:center;"> </p><h4><strong>Uninstalling / Updating Liveries</strong></h4><ol><li><p>Click the '<strong>Uninstall</strong>' or '<strong>Update</strong>'<strong> </strong>button on the desired livery. </p></li><li><p>Done! You may now close the iniManager.</p></li></ol><p></p><div class="ipsRichTextBox ipsRichTextBox--alwaysopen" data-i-background-color="theme_2"><div class="ipsRichTextBox__title"><p><strong><span data-i-color="red">Note: </span></strong><span data-i-color="root">Liveries are cross-compatible across all Cabin Variants</span></p></div><p>You can use any livery with either the Futuristic or Classic Cabin variants.</p></div>]]></description><guid isPermaLink="false">42219</guid><pubDate>Thu, 19 Nov 2026 06:34:44 +0000</pubDate></item><item><title>How to - Walkaround Mode - Access and Interactions</title><link>https://forum.inibuilds.com/topic/42218-how-to-walkaround-mode-access-and-interactions/</link><description><![CDATA[<p style="text-align:center;"><img class="ipsImage ipsRichText__align--block" data-fileid="30900" src="//cdn-forum.inibuilds.com/monthly_2026_11/HowTo_WalkaroundMode.png.e07de4153c132f3f94e142824c9d9bcc.png" alt="HowTo_WalkaroundMode.png" title="" width="1000" height="200" loading="lazy"></p><p style="text-align:left;">In MSFS 2024, 'Preflight Walkaround' is the default first phase of a flight when you start 'cold and dark' from a parking spot / ramp. Your pilot character spawns close to the currently selected aircraft, and it is possible to walk around and interact with various doors, panels and hatches.</p><h4 style="text-align:left;"><strong>Exiting Walkaround</strong></h4><p style="text-align:left;">You may exit the pre-flight walkaround at any time by clicking on the door handle or using the user-defined key bind for '<strong><em>TAKE CONTROL OF CHARACTER</em></strong>' (Default: <strong>Shift+C</strong>).</p><p style="text-align:center;"><img class="ipsImage ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="16390" src="//cdn-forum.inibuilds.com/monthly_2024_11/image.thumb.png.dfc1fcf93e2afd6e95eecc448c54350f.png" alt="image.thumb.png.dfc1fcf93e2afd6e95eecc448c54350f.png" title="image.thumb.png.dfc1fcf93e2afd6e95eecc448c54350f.png" style="--i-media-width: 600px;" width="1000" height="80" loading="lazy"><br><strong>Control Settings</strong> - Keybind for Entering/Exiting 'Preflight' mode</p><h4><strong>Walkaround Interactions</strong></h4><p>On the <strong>iniBuilds Globa Jet</strong> for <strong>MSFS 2024</strong> there are multiple doors, hatches and service panels that open conditionally or via interactions in this mode:<br><br><strong>Engine Covers</strong></p><p><img class="ipsImage ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30902" src="//cdn-forum.inibuilds.com/monthly_2026_11/image.png.df299c0045e47a73d42c82a686504aeb.png" alt="image.png" title="" style="--i-media-width: 362px;" width="674" height="465" loading="lazy"></p><p> <strong>Ground Electrical Panel Door</strong> - Connects GPU and cables  (both DC and AC circuits)<br><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30903" src="//cdn-forum.inibuilds.com/monthly_2026_11/image.thumb.png.a7d06cbc5432675f871864ab8ac39587.png" alt="image.png" title="" style="--i-media-width: 364px;" width="1000" height="716" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/image.png.715d5d47ae7bb6e33f9d5e5c7b6030e7.png" loading="lazy"> <img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30904" src="//cdn-forum.inibuilds.com/monthly_2026_11/FlightSimulator2024_qmnMNxpDCM.thumb.png.93176e4a581c6eec585762907fc76b74.png" alt="FlightSimulator2024_qmnMNxpDCM.png" title="" style="--i-media-width: 396px;" width="1000" height="662" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/FlightSimulator2024_qmnMNxpDCM.png.a9fb9b504a76525c427bc1d15cd3c8fc.png" loading="lazy"><br> </p><p><strong>Water Service Panel Door</strong> <br> <img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30905" src="//cdn-forum.inibuilds.com/monthly_2026_11/image.thumb.png.aca1c1415ee02858af8ad302f477e580.png" alt="image.png" title="" style="--i-media-width: 488px;" width="1000" height="426" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/image.png.371cf9fdfb4bbd4e271c557e31148dc4.png" loading="lazy"> <br> </p><p><strong>Toilets Service Panel Door</strong><br> <img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30906" src="//cdn-forum.inibuilds.com/monthly_2026_11/image.thumb.png.4d12bfdcde5724948975b7ce1b11c5a4.png" alt="image.png" title="" style="--i-media-width: 490px;" width="1000" height="629" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/image.png.1ab4396e398c5bfbe06e2f80471a1191.png" loading="lazy"> <br> </p><p><strong>Avionics/APU Battery Compartment Panel Door and ladder</strong><br> <img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30907" src="//cdn-forum.inibuilds.com/monthly_2026_11/image.thumb.png.c9da554bbf625fb0fda8189cac51768e.png" alt="image.png" title="" style="--i-media-width: 494px;" width="1000" height="783" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/image.png.6ff495d190c0b834365055d8a445c1bb.png" loading="lazy"> <br> </p><p><strong>Refuelling Electric Control Panel Door</strong><br>  <img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30910" src="//cdn-forum.inibuilds.com/monthly_2026_11/image.thumb.png.903115705b66da5d4849bf8421c6d119.png" alt="image.png" title="" style="--i-media-width: 464px;" width="1000" height="605" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/image.png.4292a5d69003332651a3bf3b68a50098.png" loading="lazy"> </p><p><strong>APU Maintenance Door</strong><br> <img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30909" src="//cdn-forum.inibuilds.com/monthly_2026_11/image.thumb.png.ff1b7829f0d960ac5b82db020f4270eb.png" alt="image.png" title="" style="--i-media-width: 468px;" width="1000" height="716" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/image.png.1df246f1bbb71f1f8681178e882c26c7.png" loading="lazy"> <br> </p><p><strong>Engine Cowling Hatches</strong> - Press to Open/Close each engine's cowlings<br><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30908" src="//cdn-forum.inibuilds.com/monthly_2026_11/image.thumb.png.f0af89b34ec6fd9702c8f7d27088a01e.png" alt="image.png" title="" style="--i-media-width: 474px;" width="1000" height="600" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/image.png.7a7861b9ce98863e527b330fa9370b91.png" loading="lazy"></p><p><strong>Probe Covers</strong><br><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30911" src="//cdn-forum.inibuilds.com/monthly_2026_11/image.thumb.png.6ac0af47974b855884a3db1758658ece.png" alt="image.png" title="" style="--i-media-width: 474px;" width="938" height="750" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/image.png.93d84be5be4e89021f305700160966c8.png" loading="lazy"><br><br><strong>FWD Avionics Bay</strong><br><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30912" src="//cdn-forum.inibuilds.com/monthly_2026_11/image.thumb.png.075a060c7dfa19ac78db8d28467f252c.png" alt="image.png" title="" style="--i-media-width: 476px;" width="1000" height="632" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/image.png.502488be7036e56abcf0a17836e797ba.png" loading="lazy"><br><br><strong>Oxygen and Ground Control Interface Panels</strong><br><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30913" src="//cdn-forum.inibuilds.com/monthly_2026_11/image.thumb.png.5c5de6e8302aea60ce60617c4a6fe085.png" alt="image.png" title="" style="--i-media-width: 481px;" width="600" height="750" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/image.png.4867b6033b107c04f6efeac7fa8aa2f7.png" loading="lazy"><br><br><strong>Door Control Switch</strong><br><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30914" src="//cdn-forum.inibuilds.com/monthly_2026_11/image.thumb.png.b104d8af8b31dd9fbc03a20f1cce8029.png" alt="image.png" title="" style="--i-media-width: 481px;" width="1000" height="539" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/image.png.3bc08b8c483b06053349224c7deb7736.png" loading="lazy"></p>]]></description><guid isPermaLink="false">42218</guid><pubDate>Thu, 19 Nov 2026 06:33:59 +0000</pubDate></item><item><title>How to - EFB Maintenance Page</title><link>https://forum.inibuilds.com/topic/42217-how-to-efb-maintenance-page/</link><description><![CDATA[<p style="text-align:center;"><img class="ipsImage ipsRichText__align--block" data-fileid="30920" src="//cdn-forum.inibuilds.com/monthly_2026_11/HowTo_MaintenancePage.png.0b24054a93dd4b24406df08e1b4bdcd2.png" alt="HowTo_MaintenancePage.png" title="" width="1000" height="200" loading="lazy"></p><h4><strong>SYSTEM OVERVIEW</strong></h4><p style="text-align:justify;">The EFB Maintenance page shows the condition of the aircraft's consumables, wear items and service history, and lets you service them.</p><p style="text-align:justify;">Each panel has a status indicator (such as <strong>Normal</strong>) and buttons for the related servicing.</p><p style="text-align:center;"><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30853" src="//cdn-forum.inibuilds.com/monthly_2026_11/FlightSimulator2024_esXDdXWvIB.thumb.jpg.dbb41c8cce93577dc8c5d80388038ce1.jpg" alt="FlightSimulator2024_esXDdXWvIB.jpg" title="" style="--i-media-width: 685px;" width="1000" height="712" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/FlightSimulator2024_esXDdXWvIB.jpg.d981f991b22bfd439561082d7cb7e13c.jpg" loading="lazy"></p><p style="text-align:center;">(click to enlarge)</p><h4><strong>MAINTENANCE PAGE - CONTROLS AND INDICATORS</strong></h4><ol><li><p>Open the <strong>Maintenance</strong> tab at the top of the EFB (next to <strong>Weight &amp; Balance</strong> and <strong>Ground Services</strong>).</p></li><li><p>The page has six panels:</p><ul><li><p><strong>Engine Oil</strong></p></li><li><p><strong>Oil Replenishment</strong></p></li><li><p><strong>Landing Gear</strong></p></li><li><p><strong>Lavatories</strong></p></li><li><p><strong>General, Hours &amp; Cycles</strong></p></li><li><p><strong>Landings &amp; Crew Oxygen</strong></p></li><li><p><strong>Oil Quantity</strong>: Shows the oil level of each engine in quarts, with <strong>MIN</strong> (5.75 qt) and <strong>MAX</strong> (11.5 qt) markers.</p></li><li><p><strong>Refill Engine Oil</strong>: Fills both engines to the maximum level.</p></li></ul></li></ol><p><strong>Note:</strong> Keep the oil level between the MIN and MAX markers.</p><h4><strong>Oil Replenishment</strong></h4><ul><li><p><strong>RESERVOIR</strong>: Shows the oil replenishment reservoir quantity (6.0 qt capacity), with a <strong>LO</strong> marker.</p></li><li><p><strong>APU OIL</strong>: Shows the APU oil quantity (5.3 qt capacity), with a <strong>LO</strong> marker.</p></li><li><p><strong>Refill Reservoir &amp; APU Oil</strong>: Fills both to capacity.</p></li></ul><h4><strong>Landing Gear</strong></h4><ul><li><p><strong>TIRE WEAR / BRAKE WEAR</strong>: Shows tire and brake wear as a percentage.</p></li><li><p><strong>BRAKE TEMP</strong>: Shows the current brake temperature in °C.</p></li><li><p><strong>GEAR CYCLES</strong>: Shows the number of gear cycles.</p></li><li><p><strong>Gear Diagram</strong>: Select a tire or brake to choose it for replacement on its own.</p></li><li><p><strong>Replace Selected</strong>: Replaces the tire or brake you selected.</p></li><li><p><strong>Replace All Tires / Replace All Brakes</strong>: Replaces every tire or every brake.</p></li><li><p><strong>Gear Inspection</strong>: Runs a landing gear inspection.</p></li></ul><p><strong>Note:</strong> <strong>Replace Selected</strong> is only available once you have selected a tire or brake on the gear diagram.</p><h4><strong>Lavatories</strong></h4><ul><li><p><strong>VACUUM TANK</strong>: Shows the vacuum tank pressure in psi, with <strong>MIN</strong> (3 psi) and <strong>MAX</strong> (5 psi) markers.</p></li><li><p><strong>WASTE TANK</strong>: Shows the waste tank level in gallons (16.5 gal capacity), with <strong>ALMOST FULL</strong> and <strong>FULL</strong> markers.</p></li><li><p><strong>WATER TANK</strong>: Shows the potable water level in gallons (28.6 gal capacity), with an <strong>ALMOST EMPTY</strong> marker.</p></li><li><p><strong>VACUUM PUMP / FLUSH VALVE</strong>: Shows whether the vacuum pump is on or off and whether the flush valve is open or closed.</p></li><li><p><strong>Empty Waste Tank</strong>: Empties the waste tank.</p></li><li><p><strong>Refill Water Tank</strong>: Fills the water tank to capacity.</p></li></ul><h4><strong>General, Hours &amp; Cycles</strong></h4><ul><li><p><strong>ENGINE HOURS / ENGINE CYCLES</strong>: Shows the operating hours and cycles for <strong>ENG 1</strong> and <strong>ENG 2</strong>.</p></li><li><p><strong>APU HOURS / APU CYCLES</strong>: Shows the APU operating hours and cycles.</p></li><li><p><strong>AIRFRAME</strong>: Shows total airframe <strong>HOURS</strong>, <strong>TAKEOFFS</strong> and <strong>LANDINGS</strong>.</p></li></ul><h4><strong>Landings &amp; Crew Oxygen</strong></h4><ul><li><p><strong>LAST TOUCHDOWN</strong>: Shows the <strong>LOAD</strong> (g), <strong>SINK</strong> rate (fpm) and number of <strong>HARD LANDINGS</strong> for the last landing.</p></li><li><p><strong>SINCE LAST INSPECTION</strong>: Shows the landing status since the last inspection.</p></li><li><p><strong>CREW OXYGEN</strong>: Shows the crew oxygen quantity as a percentage, with the bottle pressure and temperature and a <strong>LO</strong> marker.</p></li><li><p><strong>Hard Landing Inspection</strong>: Runs an inspection after a hard landing.</p></li><li><p><strong>Recharge Crew Oxygen</strong>: Refills the crew oxygen to 100%.</p></li></ul><h4><strong>RESET / DEFAULT SETTINGS</strong></h4><p>The service history can be reset from the <strong>General, Hours &amp; Cycles</strong> panel:</p><ul><li><p><strong>Reset Hours &amp; Cycles</strong>: Resets the engine, APU and airframe hours and cycles to zero.</p></li><li><p><strong>Reset Hyd Brake Fluid</strong>: Resets the hydraulic brake fluid.</p></li></ul>]]></description><guid isPermaLink="false">42217</guid><pubDate>Thu, 19 Nov 2026 06:32:38 +0000</pubDate></item><item><title><![CDATA[How to - CPDLC/DATALINK - Setup & Operation]]></title><link>https://forum.inibuilds.com/topic/42216-how-to-cpdlcdatalink-setup-operation/</link><description><![CDATA[<p style="text-align:center;"><img class="ipsImage ipsRichText__align--block" data-fileid="30934" src="//cdn-forum.inibuilds.com/monthly_2026_11/HowTo_CPDLC.png.564f347ab491721a7b2887532e894a61.png" alt="HowTo_CPDLC.png" title="" width="1000" height="200" loading="lazy"></p><p>The <strong>iniBuilds Global Jet</strong> allows for in-sim CPDLC connections for use with online networks such as <strong>Vatsim/IVAO</strong> as well as popular 3rd-party ATC programs such as <strong>BATC </strong>and <strong>Say Intentions</strong>. These connections are seamlessly integrated into the Multi-Function Display (<strong>MFD</strong>) pages and function to allow users to communicate with <strong>ATC</strong> via <strong>CPDLC.</strong></p><p style="text-align:center;"><img class="ipsImage ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30786" src="//cdn-forum.inibuilds.com/monthly_2026_11/image.png.a00d25f073b3556bff7f68a2fd258649.png" alt="image.png" title="image.png" style="--i-media-width: 463px;" width="618" height="525" loading="lazy"></p><h4><strong>Setup - EFB</strong></h4><p>To set up your connection:</p><ol><li><p>Open the EFB and navigate to <strong>Settings &gt; 3rd Party</strong>.</p></li><li><p>Enter your<br>- <strong>Hoppie Callsign</strong> in the designated field (this is your Hoppie Logon Code) <strong>or</strong><br>- <strong>Say Intentions API code </strong>in the corresponding field.<br>These fields can be filled in manually using the on-screen keyboard, or you can paste your codes directly into the field.</p></li><li><p>Under <strong>CPDLC Source</strong>, select your preferred provider from the dropdown:</p><ul><li><p><strong>Hoppie</strong></p></li><li><p><strong>SayIntentions</strong></p></li><li><p><strong>BeyondATC</strong></p></li></ul></li></ol><p style="text-align:center;"><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30787" src="//cdn-forum.inibuilds.com/monthly_2026_11/image.thumb.png.bc5a872ebfa4fb4fc881651fb17e036e.png" alt="image.png" title="image.png" style="--i-media-width: 578px;" width="1000" height="648" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/image.png.2924a1cfc7c40212da1912081eb2abe5.png" loading="lazy"><br>(Click to enlarge image)</p><p><strong>NOTE</strong>: You can also select the provider via the CNS using Right Select Key 1 (This change will mirror on the EFB and vice versa)</p><h4><strong>CPDLC - CONTROLS AND INDICATORS</strong></h4><ol><li><p><strong>CPDLC Window</strong>: Shown on the MFD, with line select keys on each side.</p></li><li><p><strong>MKP Keyboard</strong>: Used to type entries into the scratchpad at the bottom of the window.</p></li></ol><p style="text-align:center;"><img class="ipsImage ipsRichText__align--block" data-fileid="30873" src="//cdn-forum.inibuilds.com/monthly_2026_11/image.png.c18349a051c02865ae1894c033160fd2.png" alt="image.png" title="" width="488" height="372" loading="lazy"></p><h4><strong>LOGGING ON - CPDLC LOGON/STATUS</strong></h4><ul><li><p><strong>PROVIDER</strong>: Shows the data link provider (HOPPIE/SAY INTENTIONS/BATC).</p></li><li><p><strong>FLT ID</strong>: Shows the aircraft flight ID - This is user configurable via the MKP keyboard</p></li><li><p><strong>LOGON TO</strong>: Type the ATC station code (for example, <strong>KUSA/LONS</strong>) on the MKP, then press the line select key next to <strong>LOG ON</strong></p></li><li><p><strong>SEND LOGON</strong>: Sends the logon request to ATC.</p></li><li><p><strong>CDA / NDA</strong>: Shows the Current and Next Data Authority once you are connected.</p></li></ul><p><strong>Note:</strong> <strong>LOGON REQUIRED</strong> and <strong>NO ATC COMM</strong> are shown until a logon is completed.</p><h4><strong>CPDLC MAIN MENU</strong></h4><ul><li><p><strong>LOGON/STATUS</strong>: Opens the logon page.</p></li><li><p><strong>REQUESTS</strong>: Opens the <strong>FANS REQUESTS</strong> page: <strong>ALTITUDE</strong>, <strong>OFFSET</strong>, <strong>SPEED</strong>, <strong>ROUTE</strong>, <strong>CLEARANCE</strong>, <strong>VMC DESCENT</strong>, <strong>WHEN CAN WE</strong> and <strong>VOICE REQ</strong>.</p></li><li><p><strong>POS REP</strong>: Sends a position report.</p></li><li><p><strong>FREE TEXT</strong>: Sends a free text message.</p></li><li><p><strong>MSG LOG</strong>: Shows the messages you have sent and received, with their time (for example, <strong>2346Z TO KUSA REQUEST</strong>).</p></li><li><p><strong>EMERGENCY</strong>: Opens the emergency message page.</p></li><li><p><strong>RETURN</strong>: Goes back to the previous page.<br></p></li></ul><p style="text-align:center;"><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30874" src="//cdn-forum.inibuilds.com/monthly_2026_11/CPDLCGIF.thumb.gif.95a9aded1409a9b7ce1fb5d79055d0de.gif" alt="CPDLC GIF.gif" title="" style="--i-media-width: 506px;" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/CPDLCGIF.gif.dd5c81f37f6eb96861c5c1206e54fb5b.gif" loading="lazy"></p><p style="text-align:center;"></p><h4><strong>DATALINK - CONTROLS AND INDICATORS</strong></h4><ol><li><p><strong>DATALINK Window</strong>: Shown on the MFD, with line select keys on each side.</p></li><li><p><strong>MKP Keyboard</strong>: Used to type entries into the scratchpad at the bottom of the window.</p></li><li><p><strong>PAGE</strong>: Moves through the pages of a multi-page message (for example, <strong>1/3</strong>).</p></li></ol><p style="text-align:center;"><img class="ipsImage ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30875" src="//cdn-forum.inibuilds.com/monthly_2026_11/image.png.759ea1852454d6ce88d569629246d4a7.png" alt="image.png" title="" style="--i-media-width: 384px;" width="476" height="375" loading="lazy"></p><h4><strong>DL - APPLICATION MENU</strong></h4><ul><li><p><strong>AOC CORP</strong>: Opens the <strong>DATALINK MENU</strong>.</p></li><li><p><strong>ATS</strong>: Opens the <strong>ATS MENU</strong>.</p></li></ul><p><strong>DL - DATALINK MENU</strong></p><ul><li><p><strong>RCVD MSGS / SEND MSGS</strong>: Shows the messages you have received or sent.</p></li><li><p><strong>WEATHER</strong>: Opens the <strong>REQ TERMINAL WX</strong> page.</p></li><li><p><strong>ATIS</strong>: Requests the ATIS.</p></li><li><p><strong>ATS LOG</strong>: Shows the ATS message history.</p></li><li><p><strong>DEPART CLX / OCEANIC CLX</strong>: Opens the departure or oceanic clearance request.</p></li><li><p><strong>RETURN</strong>: Goes back to the previous page.</p></li></ul><h4><strong>REQUESTING WEATHER - REQ TERMINAL WX</strong></h4><ul><li><p><strong>Enter Airports</strong>: Type an ICAO code (for example, <strong>PHLI</strong>, <strong>KVNY</strong> or <strong>KSNA</strong>) on the MKP, then press a line select key to enter it. Up to six airports can be entered.</p></li><li><p><strong>SEND</strong>: Sends the request. <strong>VHF IN PROGRESS</strong> is shown while it is being sent.</p></li><li><p><strong>DL MSG*</strong>: Opens the next weather report you have received (<strong>RCVD MESSAGE</strong>).</p></li></ul><p style="text-align:center;"><img class="ipsImage ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30877" src="//cdn-forum.inibuilds.com/monthly_2026_11/DLWX.gif.ceb151598163c0b8f3c642712f116e65.gif" alt="DL WX.gif" title="" style="--i-media-width: 479px;" width="690" height="522" loading="lazy"></p><h4><strong>REQUESTING ATIS AND CLEARANCES - ATS MENU</strong></h4><ul><li><p><strong>ATIS</strong>: Requests the departure airport ATIS. The reply is shown as a <strong>RCVD MESSAGE</strong>.</p></li><li><p><strong>DEPART CLX</strong>: Requests a departure clearance. <strong>ATS FLT ID</strong>, <strong>FACILITY</strong>, <strong>A/C TYPE</strong>, <strong>ATIS</strong>, <strong>ORIG STA</strong>, <strong>DEST STA</strong> and <strong>GATE</strong> are filled in automatically and can be edited. Select <strong>SEND*</strong> to send the request.</p></li><li><p><strong>OCEANIC CLX</strong>: Requests an oceanic clearance. Enter the <strong>FACILITY</strong>, <strong>ENTRY POINT</strong>, <strong>AT TIME</strong>, <strong>MACH</strong> and <strong>FLT LEVEL</strong>, then select <strong>SEND</strong>.</p></li><li><p><strong>ATS LOG</strong>: Shows the ATS message history.</p></li></ul><p><strong>Note:</strong> Datalink replies come in over VHF. <strong>VHF IN PROGRESS</strong> is shown in the scratchpad while a request is being sent.</p><p style="text-align:center;"><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30876" src="//cdn-forum.inibuilds.com/monthly_2026_11/DLATIS.thumb.gif.c49fc4da4248316201dba45cf1d99079.gif" alt="DL ATIS.gif" title="" style="--i-media-width: 487px;" width="648" height="871" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/DLATIS.gif.91876836ea4d68ead9995222de65243c.gif" loading="lazy"></p>]]></description><guid isPermaLink="false">42216</guid><pubDate>Thu, 19 Nov 2026 06:22:02 +0000</pubDate></item><item><title>How to - Change Display Refresh Rate</title><link>https://forum.inibuilds.com/topic/42215-how-to-change-display-refresh-rate/</link><description><![CDATA[<p style="text-align:center;"><img class="ipsImage ipsRichText__align--block" data-fileid="30935" src="//cdn-forum.inibuilds.com/monthly_2026_11/HowTo_DisplayRefreshRate.png.c650a59ff2f31f2a7be54839f15fbf37.png" alt="HowTo_DisplayRefreshRate.png" title="" width="1000" height="200" loading="lazy"></p><p></p><p>Changing the <strong>Display Refresh Rate</strong> on your <strong>iniBuilds Global Jet</strong> helps your simulator performance and stability by adjusting how frequently the aircraft's system displays and cursor update on CPU-limited systems.</p><p style="text-align:center;"><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30785" src="//cdn-forum.inibuilds.com/monthly_2026_11/RefreshGIF.thumb.gif.95491bf932318ba914242a084f605935.gif" alt="Refresh GIF.gif" title="Refresh GIF.gif" style="--i-media-width: 615px;" width="1425" height="971" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/RefreshGIF.gif.9745555dcbe63cb9f620fb0debe219ab.gif" loading="lazy"><br>(Click to enlarge image)</p><h4><strong>How to Change the Display Refresh Rate</strong></h4><ol><li><p><strong>Navigate to Settings:</strong> Select <strong>Settings</strong> from the home page</p></li><li><p><strong>Select the Simulation Page:</strong> From the left-hand sidebar, choose <strong>Simulation</strong>.</p></li><li><p><strong>Locate Display Refresh Rate:</strong> Find the <strong>Display Refresh Rate</strong> drop-down selector in the settings list.</p></li><li><p><strong>Choose Your Preferred Rate:</strong> Click the drop-down and select from the three available options:</p><ul><li><p><strong>20 FPS - </strong>CPU-limited systems experiencing stutters or frame drops, where maximizing performance is the priority.</p></li><li><p><strong>30 FPS - </strong>A balanced middle ground - moderate performance gains with minimal impact on display smoothness.</p></li><li><p><strong>60 FPS -</strong> Systems with strong single-core CPU performance, prioritizing the smoothest possible display updates.</p></li></ul></li></ol><p>Changes take effect immediately, no restart is required.</p>]]></description><guid isPermaLink="false">42215</guid><pubDate>Thu, 19 Nov 2026 06:04:08 +0000</pubDate></item><item><title>How to - Popout Displays</title><link>https://forum.inibuilds.com/topic/42214-how-to-popout-displays/</link><description><![CDATA[<p style="text-align:center;"><img class="ipsImage ipsRichText__align--block" data-fileid="30936" src="//cdn-forum.inibuilds.com/monthly_2026_11/HowTo_PopoutDisplays.png.c829647ec3d103d884a1b39d5c20feec.png" alt="HowTo_PopoutDisplays.png" title="" width="1000" height="200" loading="lazy"></p><p>By popular demand, the <strong>IniBuilds Global Jet</strong> supports individual pop-out displays for the all DU screens. Each popped-out display remains fully interactive, allowing you to click, scroll, and operate them just as you would in the main cockpit view - perfect for multi-monitor or home cockpit setups.</p><p style="text-align:center;"><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30814" src="//cdn-forum.inibuilds.com/monthly_2026_11/image.thumb.png.5284163e83811bc77dfae2affbc59c97.png" alt="image.png" title="" style="--i-media-width: 824px;" width="1000" height="422" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/image.png.d8d675363e1ead357be2031b9cfdd3c3.png" loading="lazy"><br>(Click to enlarge image)</p><h4>How to Pop-out a Screen?</h4><p>To pop out displays in MSFS 2024, hold the<strong> Right Alt</strong> key (or <strong>AltGr</strong>) and left-click directly on the center of any supported glass cockpit screen.</p><p style="text-align:center;"><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="29029" src="//cdn-forum.inibuilds.com/monthly_2026_09/image.thumb.png.b1abdf56548579a280e4390dc409949f.png" alt="image.png" title="image.png" style="--i-media-width: 550px;" width="1000" height="381" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_09/image.png.3c466286130b90a2f88142cc00f4f24c.png" loading="lazy"><br>(Click to enlarge image)</p><p style="text-align:center;"><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30784" src="//cdn-forum.inibuilds.com/monthly_2026_11/wXC5EYJm6O.thumb.jpg.7a608d4b83de4d718f97110927600e95.jpg" alt="wXC5EYJm6O.jpg" title="wXC5EYJm6O.jpg" style="--i-media-width: 633px;" width="1000" height="619" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/wXC5EYJm6O.jpg.555e3e3d40230572742e01238d873534.jpg" loading="lazy"></p><p style="text-align:center;">(Click to enlarge image)</p><p>The instrument opens in a separate, movable window that you can drag to a second monitor or resize.</p><p style="text-align:center;"><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30812" src="//cdn-forum.inibuilds.com/monthly_2026_11/PopOutGIF.thumb.gif.9f6b6890333efeff1f4693bdd06e52f0.gif" alt="Pop Out GIF.gif" title="" style="--i-media-width: 848px;" width="3440" height="1440" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/PopOutGIF.gif.d864cd81cf060d71aa72ee5851eaf784.gif" loading="lazy"></p><p style="text-align:center;">(Click to enlarge image)</p><p></p>]]></description><guid isPermaLink="false">42214</guid><pubDate>Thu, 19 Nov 2026 05:55:23 +0000</pubDate></item><item><title>How to - Change Weight Units (KG/LBS)</title><link>https://forum.inibuilds.com/topic/42213-how-to-change-weight-units-kglbs/</link><description><![CDATA[<p style="text-align:center;"><img class="ipsImage ipsRichText__align--block" data-fileid="30937" src="//cdn-forum.inibuilds.com/monthly_2026_11/HowTo_ChangeWeightUnits.png.94a55cc84dde8375e98bed2e20857bf8.png" alt="HowTo_ChangeWeightUnits.png" title="" width="1000" height="200" loading="lazy"></p><p></p><p>Changing weight units in the Inibuilds Global Jet is possible by navigating to the EBF "Settings&gt;EFB" page. <br>The first option will contain a drop down toggle to allow switching between KG and Imperial units. <br></p><p><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block" data-fileid="30783" src="//cdn-forum.inibuilds.com/monthly_2026_11/image.thumb.png.ccef54fa1ff993c69fde07af01121dc0.png" alt="image.png" title="image.png" width="1000" height="605" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/image.png.d17912d0cc64a7659b5d36ddc7f25560.png" loading="lazy"></p>]]></description><guid isPermaLink="false">42213</guid><pubDate>Thu, 19 Nov 2026 05:48:37 +0000</pubDate></item><item><title>How to - External Fuel Panel Management</title><link>https://forum.inibuilds.com/topic/42212-how-to-external-fuel-panel-management/</link><description><![CDATA[<p style="text-align:center;"><img class="ipsImage ipsRichText__align--block" data-fileid="30916" src="//cdn-forum.inibuilds.com/monthly_2026_11/HowTo_ExternalFuelPanel.png.3666493d4256ec9c57b7e4d95414d4ac.png" alt="HowTo_ExternalFuelPanel.png" title="" width="1000" height="200" loading="lazy"></p><h4 style="text-align:left;"><br><strong>Panel Location and Initialization</strong></h4><p><strong>Where is the external fuel panel located?</strong></p><ul><li><p>The refuel/defuel door is situated on the leading edge of the right side of the wing-to-fuselage fairing.</p></li><li><p>Opening this door gives you access to both the pressure refueling adapter and the fuel/defuel control panel.<br></p></li></ul><p style="text-align:center;"><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30824" src="//cdn-forum.inibuilds.com/monthly_2026_11/20261119-1911-50.8662659.thumb.gif.06d47a0ca3de2840f2a5225b9f868aba.gif" alt="20261119-1911-50.8662659.gif" title="20261119-1911-50.8662659.gif" style="--i-media-width: 450px;" width="1640" height="1230" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/20261119-1911-50.8662659.gif.bb9c3af3fc3f3204d678da2cb8324483.gif" loading="lazy"><br>(Click to enlarge image)<br></p><h4><strong><span data-ips-font-size="125">Common Issues</span></strong></h4><p><strong>Why isn't refueling starting immediately when I power the panel?</strong></p><ul><li><p><strong>Issue:</strong> You must wait a few seconds after powering up the panel before fueling can begin.</p></li><li><p>At panel power-up, the Fuel Management Quantity Gauging Computer (FMQGC) automatically initiates a momentary built-in test.</p></li><li><p>This test occurs regardless of the fueling mode you plan to use.</p></li><li><p>You will know the test is successful—and the panel is ready—when the individual tank and total fuel quantities appear on the panel display.</p></li></ul><p><strong>Does the panel drain the aircraft battery?</strong></p><ul><li><p>Yes, the panel draws power directly from the APU battery direct bus.</p></li><li><p><strong>Issue:</strong> You must manually turn the panel off after use to prevent APU battery drain when the aircraft is unpowered.</p></li></ul><p></p><h4><strong>Automatic Refuelling Mode</strong></h4><p><strong>How do I use Automatic Mode?</strong></p><ul><li><p style="text-align:left;">Turn the Panel Switch to Refuel Auto and wait for the display to initialize. It will take a few seconds before current fuel displays and the inhibit is removed.</p><p style="text-align:center;"><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30825" src="//cdn-forum.inibuilds.com/monthly_2026_11/image.thumb.png.436e7cd2659e0c049169cb6271aa8b17.png" alt="image.png" title="image.png" style="--i-media-width: 450px;" width="723" height="750" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/image.png.c8927e21298027f162b8bc1b13bbf680.png" loading="lazy"><br>(Click to enlarge image)</p></li></ul><p><strong>How do I set my desired fuel amount?</strong></p><ul><li><p>Use the INCR/DECR (Increase/Decrease) switch on the panel to input your target quantity.</p></li><li><p>This entered value will display above the "PRESEL" (Preselect) text on the screen.</p></li><li><p><strong>Common Issue:</strong> The preselect quantity represents the <strong>final total fuel quantity</strong> desired in the tanks, <em>not</em> the amount of fuel you are uploading.</p></li></ul><p style="text-align:center;"><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30826" src="//cdn-forum.inibuilds.com/monthly_2026_11/image.thumb.png.068ceb2045b0940cc024e74a52e7e15d.png" alt="image.png" title="image.png" style="--i-media-width: 450px;" width="837" height="750" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/image.png.85269d4559ec74f31fd13a6d18182b27.png" loading="lazy"><br>(Click to enlarge image)</p><p><strong>How does the Automatic transfer work once started?</strong></p><ul><li><p>Move the START - STOP/SOV TEST switch to the START position. Note this will flash START for ~10 seconds before fueling begins.</p></li><li><p>The FMQGC uses an internal load schedule to automatically distribute the fuel between tanks.</p></li><li><p>The system ensures the wing tanks are filled first, followed by the aft and center tanks.</p></li><li><p>The fueling operation will stop automatically once your preselected total is reached.</p></li></ul><p></p><h4><strong>Manual Refueling/Defueling Mode</strong></h4><p style="text-align:center;"><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30829" src="//cdn-forum.inibuilds.com/monthly_2026_11/image.thumb.png.f1126c96b1fcac30bc8a3ae2dd19ff31.png" alt="image.png" title="image.png" style="--i-media-width: 450px;" width="752" height="750" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/image.png.36654657d77df3e99e321eecfcff495b.png" loading="lazy"><br>(Click to enlarge image)</p><p><strong>When should I use Manual Mode?</strong></p><ul><li><p>The manual mode is used when you need a maximum upload (completely filling the tanks).</p></li><li><p>It also serves as a backup, allowing you to continue refueling if an error message inhibits the automatic mode.</p></li></ul><p><strong>How to Defuel or fuel a selected tank?</strong></p><ul><li><p>Move the Main Panel switch to Refuel/Defuel Manual and wait for the panel to initialize (~5 seconds)</p></li><li><p>Open the switch to the tank(s) you wish to refuel/defuel.</p></li><li><p>They will begin refueling/defueling after a few seconds</p></li><li><p>Return the respective tank to CLOSED once desired level is met and set main panel switch to OFF. Close Fairing Access Door.</p></li></ul><p></p><h4><strong>Common Messages and Post-Refueling Procedures</strong></h4><p><strong>What does the "INHIB" message mean?</strong></p><ul><li><p>"INHIB" means refueling is currently inhibited by the system.</p></li><li><p>This can occur due to an improper switch selection, a failed refueling shutoff valve (SOV), or if you preselected a fuel quantity that is lower than the actual fuel currently in the tanks.</p></li></ul><p><strong>What does the "FULL" message mean?</strong></p><ul><li><p>This message indicates that the high-level sensor has detected that the associated tank is full.</p></li></ul><p><strong>Is there anything I need to do after refueling is complete?</strong></p><ul><li><p>Turn off the main panel switch and close the fairing panel.</p></li></ul>]]></description><guid isPermaLink="false">42212</guid><pubDate>Thu, 19 Nov 2026 05:44:31 +0000</pubDate></item><item><title><![CDATA[How to - Import flightplan & winds from SimBrief?]]></title><link>https://forum.inibuilds.com/topic/42210-how-to-import-flightplan-winds-from-simbrief/</link><description><![CDATA[<p style="text-align:center;"><img class="ipsImage ipsRichText__align--block" data-fileid="30938" src="//cdn-forum.inibuilds.com/monthly_2026_11/HowTo_ImportFlightplanSimbrief.png.3c92167f1bc8d4c6fce4c8b40ef847cc.png" alt="HowTo_ImportFlightplanSimbrief.png" title="" width="1000" height="200" loading="lazy"></p><p>You can import a flight plan created in SimBrief straight into the FMS from the INIT page. This guide covers setting up your SimBrief Pilot ID and importing your route into the FMS.</p><p><strong>Setting Up SimBrief Import</strong></p><ul><li><p>Check that your SimBrief Pilot ID (numbers only) is entered on the <strong>EFB&gt;SETTINGS&gt;3RD PARTY</strong> page.</p></li><li><p>Click the <strong>SIMBRIEF USER ID</strong> text field, then type the ID with the On-Screen Keyboard.</p></li></ul><p style="text-align:center;"><img class="ipsImage ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30834" src="//cdn-forum.inibuilds.com/monthly_2026_11/image.png.258eb40311750ed0c098cae9464fe02b.png" alt="image.png" title="" style="--i-media-width: 627px;" width="995" height="386" loading="lazy"></p><p style="text-align:center;">(click to enlarge)</p><p><strong>Note:</strong> Your SimBrief Pilot ID is on the <strong>Account Settings</strong> page of the <a rel="external nofollow" href="https://SimBrief.com">SimBrief.com</a> website.</p><p><strong>IMPORTING ROUTE INTO EFB</strong></p><ul><li><p>In the EFB homepage, navigate to the <strong>FLIGHT INFO</strong> tab and click the <code>SimBrief</code> button.</p></li><li><p>Observe the current plan has loaded</p><p style="text-align:center;"><br><br><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30835" src="//cdn-forum.inibuilds.com/monthly_2026_11/ImportsimbriefGIF.thumb.gif.a770a477c29a04d0c3c57de768a9f22e.gif" alt="Import simbrief GIF.gif" title="" style="--i-media-width: 785px;" width="1758" height="1285" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/ImportsimbriefGIF.gif.76d63425396e6f1ece34a2be3a24d6fd.gif" loading="lazy"></p><p style="text-align:center;">(click to enlarge)</p><p style="text-align:left;"><br><br><strong>IMPORTING ROUTE INTO FMS - INIT PAGE</strong></p><p></p></li><li><p><strong>FPLN UPLINK REQUEST</strong>: Requests your SimBrief route for the FMS.<br><strong>NOTE: </strong>The imported flight plan will loads into the <strong>SEC</strong> page. You must activate it using the <code>ACTIVATE SEC</code> and <code>EXEC</code> buttons to have it show as the active (<strong>ACT</strong>) flight plan.</p></li></ul><p style="text-align:center;"><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30836" src="//cdn-forum.inibuilds.com/monthly_2026_11/InsertSBPlan_FMSGIF.thumb.gif.46ad927c7b156900a0169f77a0677952.gif" alt="Insert SB Plan_FMS GIF.gif" title="" style="--i-media-width: 807px;" width="1758" height="1285" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/InsertSBPlan_FMSGIF.gif.026351e15beccad58764bc049257383e.gif" loading="lazy"></p><p style="text-align:center;">(click to enlarge)</p><p style="text-align:left;">Once the plan is imported, you may request winds using the <code>FPLN WIND REQ</code> Button. <br></p><p style="text-align:center;"><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block" data-fileid="30838" src="//cdn-forum.inibuilds.com/monthly_2026_11/FlightSimulator2024_PI5BmKFwBD.thumb.png.bb0b9460924aa07494405e12608f4c34.png" alt="FlightSimulator2024_PI5BmKFwBD.png" title="" width="518" height="750" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/FlightSimulator2024_PI5BmKFwBD.png.9ad4d3423841fd751d9b0990d73c25cc.png" loading="lazy"><br><br></p><p style="text-align:left;">The winds will populate on the <code>RTE</code> page in the active plan</p><p style="text-align:center;"><br><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block" data-fileid="30839" src="//cdn-forum.inibuilds.com/monthly_2026_11/image.thumb.png.8e8f2e0b6191a8ec1a89bba3341b28a9.png" alt="image.png" title="" width="542" height="750" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/image.png.c6bbf99cd826d1bda8afdfd53045f602.png" loading="lazy"></p><p></p>]]></description><guid isPermaLink="false">42210</guid><pubDate>Thu, 19 Nov 2026 04:16:13 +0000</pubDate></item><item><title>How to - Create Simbrief Flightplans on the EFB Flight Planner</title><link>https://forum.inibuilds.com/topic/42209-how-to-create-simbrief-flightplans-on-the-efb-flight-planner/</link><description><![CDATA[<p><img class="ipsImage ipsRichText__align--block" data-fileid="30939" src="//cdn-forum.inibuilds.com/monthly_2026_11/HowTo_CreateFlightplans.png.3721d6399240b9d16b1ac99251f5d4cd.png" alt="HowTo_CreateFlightplans.png" title="" width="1000" height="200" loading="lazy"></p><p>The <strong>iniBuilds Global Jet</strong> EFB allows you to plan your entire flight, from departure to arrival, right from the cockpit using the <strong>EFB Flight Planner</strong> page.</p><h4><strong>Accessing the Flight Planner</strong></h4><p>The new planner has its own dedicated page which can be found on the EFB <strong>Flight Info</strong> section.</p><p style="text-align:center;"><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30781" src="//cdn-forum.inibuilds.com/monthly_2026_11/FlightPLannerGIF.thumb.gif.fc4d34d16aa67c3e0d4b65aa0df5bba2.gif" alt="Flight PLanner GIF.gif" title="Flight PLanner GIF.gif" width="1525" height="1087" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/FlightPLannerGIF.gif.1c50bfd04f336550ad85b168e1480706.gif" style="--i-media-width: 450px;" loading="lazy"><br>(Click to enlarge image)</p><details class="ipsRichTextBox ipsRichTextBox--expandable ipsRichText__no-index"><summary class="ipsRichTextBox__title"><p><strong><span data-i-color="red">Note: </span></strong>You <strong>must connect to your Navigraph account</strong> &amp;<strong> enter your Simbrief User ID (numbers only)</strong> on the EFB 3rd Party Settings page in order to use this functionality.</p></summary><p style="text-align:center;"><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30779" src="//cdn-forum.inibuilds.com/monthly_2026_11/image.thumb.png.c724c2b544404706dea29b2f7fdaee68.png" alt="image.png" title="image.png" width="1000" height="703" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/image.png.f8bd1cfdd61904e1ad6334d1b41252e9.png" style="--i-media-width: 450px;" loading="lazy"></p></details><h4><strong>Creating a SimBrief Flightplan via the Planner</strong></h4><p>In order to create your flight plan, <strong>only</strong> the following fields are <strong>mandatory</strong></p><ul><li><p><strong>FROM*</strong> - Input your Departure airport's 4-letter ICAO code here (e.g. LPFR)</p></li><li><p><strong>TO*</strong> - Input your Arrival airport's 4-letter ICAO code here (e.g. EGLL)</p></li></ul><p>Then, press the <strong>GENERATE PLAN</strong> button to create a SimBrief Flightplan using the default "<strong>AUTO</strong>" values. </p><p style="text-align:center;"><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30805" src="//cdn-forum.inibuilds.com/monthly_2026_11/Global_Flight_Planner.thumb.gif.a9553d1867e7ddd8678a8e4aa57270e5.gif" alt="Global_Flight_Planner.gif" title="" width="1470" height="1038" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/Global_Flight_Planner.gif.9ebdb762f1b2165f7ca71c71994e03f6.gif" style="--i-media-width: 450px;" loading="lazy"><br>(Click to enlarge image)</p><p>For additional customization, you can also tweak the below fields which are optional</p><ul><li><p><strong>ALTN</strong> -Set your alternates plan here or input their ICAO codes manually. Default value is AUTO.</p></li><li><p><strong>AIRLINE</strong> - Input any 3-letter ICAO airline code (e.g. EJA)</p></li><li><p><strong>FLT #</strong> - Input any alpha-numeric flight numer (e.g. 25A)</p></li><li><p><strong>DEPARTURE RWY </strong>- Select your Departure airport's desired runway. Default value is AUTO.</p></li><li><p><strong>ARRIVAL RWY</strong> - Select your Arrival airport's desired runway. Default value is AUTO.</p></li><li><p><strong>PAX</strong> - Input the number of desired passengers. Values exceeding the MAX will use MAX instead. Default value is AUTO.</p></li><li><p><strong>CARGO</strong> - Input the desired weight (KG/LBS) of cargo. Values exceeding the MAX will use MAX instead. Default value is AUTO.</p></li><li><p><strong>CRUISE ALT</strong> - Enter your desired Cruise altitude in 3-digit flight levels (e.g. 380 for 38,000ft). Default value is AUTO.</p></li><li><p><strong>REG</strong> - Enter your desired aircraft registration.</p></li><li><p><strong>CPT NAME</strong> - Input custom Captain's Name on the OFP. Default value is AUTO.</p></li><li><p><strong>FO NAME</strong> - Input custom First Officer's Name on the OFP. Default value is AUTO.</p></li><li><p><strong>FORMAT</strong> - Choose the desired OFP format from the list that shows on screen. Default value is LIDO.</p></li><li><p><strong>FUELING section</strong> -  Choose between Weight (<strong>WGT)</strong> or Minute(<strong>MIN)</strong> units and enter the desired numeric value for that particular fuel section on your OFP. Default value is AUTO. </p></li></ul><p>To reset the page back to its default state, click the <strong>CLEAR</strong> button.</p><p style="text-align:center;"><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30782" src="//cdn-forum.inibuilds.com/monthly_2026_11/image.thumb.png.5e62e0e4b7914fb3177dfdd1ff7ac359.png" alt="image.png" title="image.png" width="1000" height="678" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/image.png.07a9196140d4f46c38019a387fe91fde.png" style="--i-media-width: 450px;" loading="lazy"><br>(Click to enlarge image)</p><p>To change the planning units between <strong>KG/LBS</strong>, change the Aircraft Weight Units from the Settings EFB page.</p><p style="text-align:center;"><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30778" src="//cdn-forum.inibuilds.com/monthly_2026_11/image.thumb.png.bc57a760b68542c1d7ef4431c33f2edf.png" alt="image.png" title="image.png" width="1000" height="696" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/image.png.006997409b65e109b23afccc838853c3.png" style="--i-media-width: 450px;" loading="lazy"><br>(Click to enlarge image)</p><h4><strong>Using your New Flightplan - OFP</strong></h4><p>Once you have successfully generated a flight plan, the EFB will automatically go to the OFP page and give you a '<strong>PLAN GENERATED SUCCESSFULLY</strong>' notification at the top of the screen. That's it! Your new flightplan is now active on SimBrief, same as if you had generated via their Dispatcher Tool or Website.</p><p>Now you may use this new plan on the <strong>FLIGHT INFO and WEIGHT &amp; BALANCE</strong> pages of the EFB by Importing or syncing with Simbrief as usual. You may also request your new flightplan on the FMS via the <strong>FLT PLAN UPLINK</strong> button on the<strong> FMS INIT </strong>Page.</p><p style="text-align:center;"><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30780" src="//cdn-forum.inibuilds.com/monthly_2026_11/image.thumb.png.96868fbb3ab4c951fa8cd4921113e941.png" alt="image.png" title="image.png" width="1000" height="703" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/image.png.0c752ada7d536b3952663785bf5a1c0f.png" style="--i-media-width: 450px;" loading="lazy"><br>(Click to enlarge image)</p>]]></description><guid isPermaLink="false">42209</guid><pubDate>Thu, 19 Nov 2026 03:05:06 +0000</pubDate></item><item><title>How to - Electronic Checklists Operation (ECL Dropdown)</title><link>https://forum.inibuilds.com/topic/42208-how-to-electronic-checklists-operation-ecl-dropdown/</link><description><![CDATA[<p><img class="ipsImage ipsRichText__align--block" data-fileid="30932" src="//cdn-forum.inibuilds.com/monthly_2026_11/HowTo_ElectronicChecklists.png.c5b30be9fe06a7275134982e1d931e65.png" alt="HowTo_ElectronicChecklists.png" title="" width="1000" height="200" loading="lazy"></p><h4><strong>SYSTEM OVERVIEW</strong></h4><p>The <strong>Electronic Checklist (ECL) </strong>is shown on the MFDs and accessed via the menu drop down. It displays Normal, Non-normal and Emergency checklists, and it automatically queues the checklists that match active CAS messages.<br></p><div class="ipsRichTextBox ipsRichTextBox--alwaysopen"><div class="ipsRichTextBox__title"><p><strong><span data-i-color="red">Note:</span></strong><code>USER-DEFINED</code> checklists functionality is not yet available on launch</p></div><p>The feature is under active development for a future update. Thanks for your patience.</p></div><h4><strong>ECL - CONTROLS AND INDICATORS</strong></h4><ol><li><p><strong>INDEX</strong>: Opens the checklist categories: <strong>NORMAL</strong>, <strong>NON-NORMAL</strong>, <strong>EMERGENCY</strong> and <strong>USER-DEFINED</strong>.</p></li><li><p><strong>QUEUE</strong>: Lists the checklists for active CAS messages (for example, <strong>PASSENGER DOOR</strong>, <strong>OUTBD BRAKE LO PRESS</strong> and <strong>FDR FAIL</strong>).</p></li><li><p><strong>Page Counter</strong>: Shows the current page of the checklist (for example, <strong>4/17</strong>).</p></li><li><p><strong>Back Arrow</strong>: Goes back to the previous page.</p></li></ol><p style="text-align:center;"><img class="ipsImage ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30872" src="//cdn-forum.inibuilds.com/monthly_2026_11/ECLGIF.gif.0b0384984aa1b4b36704e67ad4152bf1.gif" alt="ECL GIF.gif" title="ECL GIF.gif" width="778" height="722" style="--i-media-width: 474px;" loading="lazy"></p><h4><strong>COMPLETING A CHECKLIST</strong></h4><ul><li><p><strong>Select Item</strong>: The current item is shown in a box.</p></li><li><p><strong>Check Item</strong>: Click the item to check it off. Completed items turn green with a tick.</p></li><li><p><strong>Status</strong>: <strong>STARTED</strong> is shown at the bottom of the page while a checklist is in progress.</p></li><li><p><strong>Next Page</strong>: Use the page counter to move through the checklist.<br></p></li></ul><details class="ipsRichTextBox ipsRichTextBox--expandable ipsRichText__no-index"><summary class="ipsRichTextBox__title"><p><strong><span data-i-color="red">Note:</span></strong> Once a queued non-normal checklist is completed, it is removed from the <strong>QUEUE</strong>.</p></summary><p></p></details>]]></description><guid isPermaLink="false">42208</guid><pubDate>Thu, 19 Nov 2026 02:36:55 +0000</pubDate></item><item><title>How to - Keyboard Entry Mode</title><link>https://forum.inibuilds.com/topic/42207-how-to-keyboard-entry-mode/</link><description><![CDATA[<p><img class="ipsImage ipsRichText__align--block" data-fileid="30930" src="//cdn-forum.inibuilds.com/monthly_2026_11/HowTo_KeyboardEntry.png.bb4bfb1dedb28396bda873ba1347f95b.png" alt="HowTo_KeyboardEntry.png" title="" width="1000" height="200" loading="lazy"><br><br>The<strong> Multi-function Key Pad (MKP)</strong> is part of the Control and Display System. They are directly connected to all the display units for normal operations and for reconfiguration purposes. </p><p>There are two identical Keyboard and MKP on the pedestal:</p><ul><li><p>One MKP for the Captain (CAPT) side FMS/ND</p></li><li><p>One MKP for the First Officer (F/O) side FMS/ND</p></li></ul><p>You can use the MKP to:</p><ul><li><p>Display the various FMS pages on the MFD</p></li><li><p>Enter and modify data on the MFD FMS pages</p></li><li><p>Perform some flight plan revisions on the ND.<br></p></li></ul><div class="ipsRichTextBox ipsRichTextBox--alwaysopen"><div class="ipsRichTextBox__title"><p><strong><span data-i-color="red">Note: </span></strong>The MKP is assigned priority based on the defined seat position (CA/FO) in the EFB.</p></div><p>The opposite one will serve as a display side only</p><p style="text-align:center;"><img class="ipsImage ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30889" src="//cdn-forum.inibuilds.com/monthly_2026_11/image.png.8a6dc356c14704b9695920c8d960f4da.png" alt="image.png" title="image.png" width="985" height="449" style="--i-media-width: 450px;" loading="lazy"></p></div><h4 style="text-align:left;"><strong>MKP Key Functions — MFD Operations</strong></h4><p><strong>(A) ESC</strong><br>Cancels the current field entry, reverting to the last valid value. Also closes pop-up windows and menus.</p><p><strong>(B) CLR INFO</strong><br>Clears the message currently displayed in the FMS, ATC COM, or SURV message area.</p><p><strong>(C) Direction Arrow Keys (UP/DOWN)</strong><br>Scroll through pages or change the selected item in an option list — functionally identical to the scroll wheel.</p><ul><li><p>On the F-PLN page: moves between waypoints line by line, and steps between waypoints in ND PLAN mode for flight plan preview.</p></li><li><p>On DEPARTURE/ARRIVAL pages: scrolls through dropdown option lists to select runways, SIDs, STARs, approaches, and transitions.</p></li></ul><p><strong>(D) FMS Shortcut Keys</strong><br>Provide direct access to MFD pages and return the cursor to the MFD if it was previously active on another display such as the ND or MAILBOX.</p><div class="ipsRichText__table-wrapper"><table style="width: 561px;"><colgroup><col style="width:102px;"><col style="width:459px;"></colgroup><tbody><tr><th colspan="1" rowspan="1"><p>Key</p></th><th colspan="1" rowspan="1"><p>Page Displayed</p></th></tr><tr><td colspan="1" rowspan="1"><p>DIR</p></td><td colspan="1" rowspan="1"><p>FMS DIRECT TO</p></td></tr><tr><td colspan="1" rowspan="1"><p>PERF</p></td><td colspan="1" rowspan="1"><p>FMS ACTIVE/PERF (active flight phase)</p></td></tr><tr><td colspan="1" rowspan="1"><p>INIT</p></td><td colspan="1" rowspan="1"><p>FMS ACTIVE/INIT</p></td></tr><tr><td colspan="1" rowspan="1"><p>NAV AID</p></td><td colspan="1" rowspan="1"><p>FMS POSITION/NAVAIDS</p></td></tr><tr><td colspan="1" rowspan="1"><p>F-PLN</p></td><td colspan="1" rowspan="1"><p>Top of the FMS ACTIVE/F-PLN page</p></td></tr><tr><td colspan="1" rowspan="1"><p>DEST</p></td><td colspan="1" rowspan="1"><p>Bottom of the FMS ACTIVE/F-PLN page (destination)</p></td></tr><tr><td colspan="1" rowspan="1"><p>SEC INDEX</p></td><td colspan="1" rowspan="1"><p>FMS SEC INDEX</p></td></tr><tr><td colspan="1" rowspan="1"><p>SURV</p></td><td colspan="1" rowspan="1"><p>SURV CONTROLS</p></td></tr><tr><td colspan="1" rowspan="1"><p>ATC COM</p></td><td colspan="1" rowspan="1"><p>ATC COM REQUEST</p></td></tr></tbody></table></div><p><strong>(E) ND / MAILBOX Keys</strong></p><ul><li><p><strong>ND:</strong> Moves the cursor to the onside ND.</p></li><li><p><strong>MAILBOX:</strong> Moves the cursor to the Mailbox.</p></li></ul><p><strong>(F) ENT</strong><br>Behaviour varies by context:</p><ul><li><p><em>Entry field:</em> First press positions the cursor and readies the field for input. Second press validates the entry and advances the cursor to the next likely field.</p></li><li><p><em>Option list:</em> First press opens the list and selects the first option. Use the scroll wheel or arrow keys to change selection, then press again to confirm. Cursor advances to the next likely field.</p></li><li><p><em>Button:</em> Activates the highlighted button.</p></li></ul><p><strong>(G) Scroll Wheel</strong><br>Functionally identical to the UP/DOWN arrow keys. Changes the selected option in a list or scrolls through pages such as F-PLN or message lists.</p><p><strong>(H) KBD Power Switch</strong><br>Master ON/OFF toggle for the keyboard letters and numpad. Leave in the ON position during normal operations.</p><p></p><h4><strong>Cursor Operation — Moving Between Displays</strong></h4><p>Each MKP maintains its own independent cursor. In the real aircraft, each cursor is controlled by its dedicated Cursor Control Panel (CCP) trackball. In the simulation, each cursor follows the mouse within the active boundaries of the respective Captain or First Officer display.<br></p><div class="ipsRichTextBox ipsRichTextBox--alwaysopen"><div class="ipsRichTextBox__title"><p><strong>Note: </strong>Due to limitations of the sim environment, the function of this unit's cursor is controlled by the mouse.</p></div><p></p></div>]]></description><guid isPermaLink="false">42207</guid><pubDate>Thu, 19 Nov 2026 02:28:37 +0000</pubDate></item><item><title>How to - Switch between Navigraph, FAA, or LIDO Charts</title><link>https://forum.inibuilds.com/topic/42206-how-to-switch-between-navigraph-faa-or-lido-charts/</link><description><![CDATA[<p><img class="ipsImage ipsRichText__align--block" data-fileid="30926" src="//cdn-forum.inibuilds.com/monthly_2026_11/HowTo_SwitchCharts.png.bf6d1c82420337df1a54f224707757ae.png" alt="HowTo_SwitchCharts.png" title="HowTo_SwitchCharts.png" width="1000" height="200" loading="lazy"></p><p>Charts are switched on the EFB &gt; Settings &gt; 3rd Party page</p><ul><li><p>Use the MSFS CHARTS dropdown to select between LIDO or FAA charts.</p><p></p></li><li><p>Toggle the USE NAVIGRAPH CHARTS button to ON once logged on to your navigraph account.</p><p style="text-align:center;"><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30943" src="//cdn-forum.inibuilds.com/monthly_2026_11/NGCharts.thumb.gif.b56ad432735769f1c6023c9789221008.gif" alt="NG Charts.gif" title="" style="--i-media-width: 761px;" width="1851" height="1225" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/NGCharts.gif.ad4ca450097fa287b29bf479418cce54.gif" loading="lazy"></p><p><br><strong>Note:</strong> Requires an active Navigraph subscription.</p></li></ul>]]></description><guid isPermaLink="false">42206</guid><pubDate>Thu, 19 Nov 2026 02:26:46 +0000</pubDate></item><item><title><![CDATA[How to - Airport Moving Map on ND - Setup & Operation]]></title><link>https://forum.inibuilds.com/topic/42204-how-to-airport-moving-map-on-nd-setup-operation/</link><description><![CDATA[<p style="text-align:center;"><img class="ipsImage ipsRichText__align--block" data-fileid="30947" src="//cdn-forum.inibuilds.com/monthly_2026_11/HowTo_AirportMovingMap.png.9e1baa7ba4440f4b1da5e6908193d0b5.png" alt="HowTo_AirportMovingMap.png" title="" width="1000" height="200" loading="lazy"><br></p><h4 style="text-align:left;"><strong>SYSTEM OVERVIEW</strong></h4><p>The <strong>Airport Moving Map</strong> enhances crew situational awareness of the aircraft's position within the airport environment. The Navigation Display (ND) displays an airport moving map when the <strong>ND Range Selector knob</strong> is set to the <strong>ZOOM</strong> position on the EFIS Control Panel.</p><blockquote class="ipsQuote" cite="" data-ipsquote=""><div class="ipsQuote_contents" data-ipstruncate=""><p><strong>Note:</strong> The Airport Moving Map is compatible with both the <strong>default Microsoft Flight Simulator dataset</strong> and <strong>Navigraph</strong>. When using the default dataset, the map will display a raw airport layout only — <strong>runway and taxiway identifiers, labels and detailed map data will not be available</strong>. For full identifier and taxiway data, an active Navigraph subscription is required.</p></div></blockquote><p><strong>CONNECT TO NAVIGRAPH</strong></p><blockquote class="ipsQuote" cite="" data-ipsquote=""><div class="ipsQuote_contents" data-ipstruncate=""><p><strong>Note:</strong> An active Navigraph subscription is required for full map data including runway and taxiway identifiers.</p></div></blockquote><p>To connect your Navigraph account, navigate to the <strong>EFB Settings → 3rd Party Settings</strong> page and authenticate using either the displayed QR code or by visiting <a rel="external nofollow" href="https://navigraph.com/code">navigraph.com/code</a> and entering the code shown. Once authenticated, map data will update automatically.</p><p style="text-align:center;"></p><h4><strong>ACTIVATING THE AIRPORT MOVING MAP</strong></h4><p>Use the (+/-) buttons to zoom in on the ND and activate the map.</p><ul><li><p>The airport moving map will display on the ND centered on the aircraft's current position.</p></li><li><p>The knob provides four zoom levels: <strong>1000, 2000, 3000, and 6000 feet</strong>.</p></li></ul><p>The map can be displayed in the following modes selectable via the <strong>MAP Buttons on the CTP and MKP</strong>:</p><ul><li><p><strong>MAP</strong></p></li><li><p><strong>PLAN</strong></p></li></ul><p style="text-align:center;"><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30952" src="//cdn-forum.inibuilds.com/monthly_2026_11/AMM_NG.thumb.gif.8b81e1da5678914733720500953f778a.gif" alt="AMM_NG.gif" title="" style="--i-media-width: 450px;" width="1396" height="1244" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/AMM_NG.gif.08634a22e3018bba4a126c16d15ee0b3.gif" loading="lazy"> <img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30951" src="//cdn-forum.inibuilds.com/monthly_2026_11/AMM_DF.thumb.gif.18d46fa1f8541aca684fab9853085772.gif" alt="AMM_DF.gif" title="" style="--i-media-width: 364px;" width="1172" height="1288" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/AMM_DF.gif.3c2aea1454dd37c1d2e8e2c6353d6b31.gif" loading="lazy"></p><p></p><h4><strong>PANNING THE MAP</strong></h4><p>The map can be moved by <strong>left click-and-drag</strong> anywhere on the ND display. In PLAN mode, the map holds the dragged position. </p><p style="text-align:center;"><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30953" src="//cdn-forum.inibuilds.com/monthly_2026_11/AMM_PAN.thumb.gif.0a49cb87c34c56fbd4aab1dcfc366d49.gif" alt="AMM_PAN.gif" title="" style="--i-media-width: 450px;" width="1428" height="1306" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/AMM_PAN.gif.be03521315671c823342eb0fae7a1181.gif" loading="lazy"></p><p>To re-center on the aircraft, select the <code>CTR</code> button on the ND top bar</p><p style="text-align:center;"> <img class="ipsImage ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30957" src="//cdn-forum.inibuilds.com/monthly_2026_11/image.png.1f3fb9e8fee36ee96357871ddd710466.png" alt="image.png" title="" style="--i-media-width: 225px;" width="176" height="80" loading="lazy"></p><p style="text-align:center;"></p><p style="text-align:center;"></p>]]></description><guid isPermaLink="false">42204</guid><pubDate>Thu, 19 Nov 2026 01:52:36 +0000</pubDate></item><item><title>How to - Change Cabin Variants via the Aircraft Selection Menu</title><link>https://forum.inibuilds.com/topic/42203-how-to-change-cabin-variants-via-the-aircraft-selection-menu/</link><description><![CDATA[<p><img class="ipsImage ipsRichText__align--block" data-fileid="30917" src="//cdn-forum.inibuilds.com/monthly_2026_11/HowTo_CabinVariants.png.f16b23ac2d1aeb7eeab5a5a7ebabbee3.png" alt="HowTo_CabinVariants.png" title="" width="1000" height="200" loading="lazy"></p><p>The <strong>iniBuilds Global Jet</strong> for <strong>FS2024 </strong>features two highly interactive cabin variants - <strong>Classic</strong> and <strong>Futuristic</strong> - that are both fully walkable, with animated doors, seats and window shades. You can even use the flight attendant panel or cabin tablet to adjust individual reading lights, choose from nine mood-lighting colours or switch on the star constellation ceiling.<br><br>The cabin changes with the flight. Select <strong>Boarding</strong> and you’ll find refreshments and hot towels ready for your passengers. Switch to <strong>Rest &amp; Relax</strong> and the lights dim, the shades close and blankets and a chess set appear. The lighting follows the aircraft’s cabin power, and you’ll see rain on the windows in both interiors.</p><p>You can choose your preferred cabin configuration to use with any compatible livery of your choice via the <strong>Aircraft Selection Menu</strong>.</p><p style="text-align:center;"><img src="https://cdn-forum.inibuilds.com/monthly_2026_11/CCGlobal.thumb.png.a32892094fffb9d5cdbc6115fd801e17.png" alt="CCGlobal.png" class="ipsRichText__align--block ipsRichText__align--width-custom" width="1000" height="562" style="--i-media-width: 450px;" loading="lazy"> <img src="https://cdn-forum.inibuilds.com/monthly_2026_11/FCGlobal.thumb.png.4bf38411bbef3650ae091f04f591e2ea.png" alt="FCGlobal.png" class="ipsRichText__align--block ipsRichText__align--width-custom" width="1000" height="562" style="--i-media-width: 450px;" loading="lazy"><br>(Click to enlarge image)</p><h4><strong>Changing Cabin Variants </strong></h4><ol><li><p>Open the <strong>Aircraft Selection Menu</strong></p></li><li><p>Find from the list or Search for the '<strong>Global</strong>'</p></li><li><p>Choose the '<strong>iniBuilds Global Jet</strong>'</p></li><li><p>Select '<strong>Configure your aircraft</strong>' at the bottom left corner of your screen via your mouse or by pressing the shown keybind</p></li><li><p>Choose the '<strong>Variant</strong>' tab at the top</p></li><li><p>Select '<strong>Futuristic Cabin</strong>' or '<strong>Classic Cabin</strong>' variant</p></li><li><p>Switch to the '<strong>Livery</strong>' tab at the top</p></li><li><p>Choose your desired livery from the list</p></li><li><p>Select '<strong>Save and Back</strong>' at the bottom left corner of your screen via your mouse or by pressing the shown keybind</p></li><li><p>Now you can return to the Free Flight menu and select <strong>Start Flight</strong> to use the selected Livery and Cabin variant of the iniBuilds Global Jet.</p></li></ol><p style="text-align:center;"><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30830" src="//cdn-forum.inibuilds.com/monthly_2026_11/image.thumb.png.8552130f1ba66567fee66fb468e43b09.png" alt="image.png" title="" width="1000" height="514" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/image.png.a410e06f92e39cf22b3d5ca85af8f899.png" style="--i-media-width: 650px;" loading="lazy"></p><p style="text-align:center;"><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30827" src="//cdn-forum.inibuilds.com/monthly_2026_11/image.thumb.png.fb8f26bb35024fe66cc2e5d351265d92.png" alt="image.png" title="" width="1000" height="541" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/image.png.0a789396526133749bbefc777dd091d3.png" style="--i-media-width: 650px;" loading="lazy"></p><p style="text-align:center;"><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block ipsRichText__align--width-custom" data-fileid="30828" src="//cdn-forum.inibuilds.com/monthly_2026_11/image.thumb.png.341146ecc1ceb4055ab6c92b41b57047.png" alt="image.png" title="" width="1000" height="541" data-full-image="//cdn-forum.inibuilds.com/monthly_2026_11/image.png.d079cfd367baea1dfc88a477f45b4977.png" style="--i-media-width: 650px;" loading="lazy"><br>(Click to enlarge image)</p><p></p>]]></description><guid isPermaLink="false">42203</guid><pubDate>Thu, 19 Nov 2026 01:43:56 +0000</pubDate></item><item><title>How to - Direct To (DIR TO) a waypoint via the RTE page or ND</title><link>https://forum.inibuilds.com/topic/42202-how-to-direct-to-dir-to-a-waypoint-via-the-rte-page-or-nd/</link><description><![CDATA[<p><img class="ipsImage ipsRichText__align--block" data-fileid="30945" src="//cdn-forum.inibuilds.com/monthly_2026_11/HowTo_DirectTo.png.8ca04cf4f435c0aa0a7a73471ca06143.png" alt="HowTo_DirectTo.png" title="" width="1000" height="200" loading="lazy"></p><p>On the <strong>iniBuilds Global Jet</strong> you can add a Direct-To on your planned route via the FMS ROUTE Page &amp; or the MFW MAP directly.</p><p></p><h3>Using the MFW MAP / PLAN Graphic Task Menu (Fastest Method)</h3><p style="text-align:center;"><video class="ipsEmbeddedVideo ipsRichText__align--block ipsRichText__align--width-custom" data-controller="core.global.core.embeddedvideo" controls="" title="" style="--i-media-width: 450px;" preload="metadata"><source src="https://cdn-forum.inibuilds.com/monthly_2026_11/20261120-1557-02.8246547.mp4.26062b09e65c70f0dfa7fa7eb2d3695d.mp4#t=0" type="video/mp4"><a href="https://forum.inibuilds.com/applications/core/interface/file/attachment.php?id=30941&amp;key=3f700e37bb8efec58f68a1fa3e03c6ea" class="ipsAttachLink" data-fileid="30941" data-fileext="mp4" rel="">20261120-1557-02.8246547.mp4</a></source></video></p><ol><li><p>Hover your cursor over your desired downstream waypoint, navaid, or airport directly on the MFW MAP or PLAN display.</p></li><li><p>Select the object by clicking it (or using the trackball on the Cursor Control Panel / pressing <strong>ENTER</strong> on the MKP).</p></li><li><p>Select <strong>DIRECT TO...</strong> (<code>D-&gt;...</code>) from the drop-down menu that appears on the pop-up graphic Task Menu for the Fix .</p></li><li><p>Confirm the new routing previewed on the map as a dashed line.</p></li><li><p>Finalize the route change by pressing the <strong>EXEC</strong> key on the MKP or click the <strong>EXEC</strong> soft key at the bottom of the display.</p><p></p></li></ol><div class="ipsRichTextBox ipsRichTextBox--alwaysopen"><div class="ipsRichTextBox__title"><p><strong><span data-i-color="red">Note:</span> </strong>You can Direct-To an arbitrary point in space</p></div><p>To do so</p><ul><li><p>Move the cursor over an empty area of the map and select it.</p></li><li><p>This opens the <strong>Latitude/Longitude Task Menu</strong> displaying those coordinates in the title bar.</p></li><li><p>Select <strong>DIRECT TO</strong> (<code>D-&gt;</code>) and press <strong>EXEC</strong> to fly direct to that custom lat/lon point.</p></li></ul></div><p></p><h3>Using the ROUTE / FPLN SETUP Window</h3><p style="text-align:center;"><video class="ipsEmbeddedVideo ipsRichText__align--block ipsRichText__align--width-custom" data-controller="core.global.core.embeddedvideo" controls="" title="" style="--i-media-width: 450px;" preload="metadata"><source src="https://cdn-forum.inibuilds.com/monthly_2026_11/20261120-1553-59.9409544.mp4.892a2529b459718b7c439ba5e3cd59d7.mp4#t=0" type="video/mp4"><a href="https://forum.inibuilds.com/applications/core/interface/file/attachment.php?id=30940&amp;key=2965088b7f160653e647615b936c3a6b" class="ipsAttachLink" data-fileid="30940" data-fileext="mp4" rel="">20261120-1553-59.9409544.mp4</a></source></video></p><ol><li><p>Open the <strong>M</strong> menu and select <strong>FMS</strong>, or press the <strong>ROUTE</strong> / <strong>FMS</strong> Quick Access Key on the MKP to open the <strong>FPLN SETUP</strong> or <strong>ROUTE</strong> page.</p></li><li><p>Copy the desired waypoint into your MKP scratchpad (or type the waypoint identifier manually into the scratchpad).</p></li><li><p>Place your cursor over the <strong>DIRECT TO</strong> field (on the <strong>FPLN SETUP</strong> page) and press <strong>ENTER</strong>.<br><em>OR</em><br>On the <strong>ROUTE - ACT LEGS</strong> page, click your desired downstream waypoint to open its task menu, then select <strong>DIRECT TO</strong>.</p></li><li><p>Press <strong>EXEC</strong> on the MKP or display to activate the change.<br></p></li></ol><div class="ipsRichTextBox ipsRichTextBox--alwaysopen"><div class="ipsRichTextBox__title"><p><strong><span data-i-color="red">Note:</span></strong> Flight plan re-sequencing works differently to the DIREC TO function.</p></div><p>If you try to paste a waypoint directly over an existing waypoint on a <code>TO</code> line, it will insert it before or after the fix rather than going direct. Always use the <strong>DIRECT TO</strong> field or the waypoint's task menu for that reason.</p></div><p></p><h3>Using the MKP Quick Access Key</h3><p style="text-align:center;"><video class="ipsEmbeddedVideo ipsRichText__align--block ipsRichText__align--width-custom" data-controller="core.global.core.embeddedvideo" controls="" title="" style="--i-media-width: 450px;" preload="metadata"><source src="https://cdn-forum.inibuilds.com/monthly_2026_11/20261120-1559-30.3238714.mp4.39699c04091f754526d8484ef8b275f0.mp4#t=0" type="video/mp4"><a href="https://forum.inibuilds.com/applications/core/interface/file/attachment.php?id=30942&amp;key=b5b6cc1b5b739bc8b38e5c9945f40f14" class="ipsAttachLink" data-fileid="30942" data-fileext="mp4" rel="">20261120-1559-30.3238714.mp4</a></source></video></p><ol><li><p>Press the <strong>Direct-To</strong> (<code>D-&gt;</code>) Quick Access Key located on the MKP, directly below the scratchpad.</p></li><li><p>This immediately opens a <strong>DIRECT TO</strong> dialog box on the MFW.</p></li><li><p>Type or select your target waypoint and press <strong>EXEC</strong> to confirm.</p></li></ol>]]></description><guid isPermaLink="false">42202</guid><pubDate>Thu, 19 Nov 2026 01:32:15 +0000</pubDate></item></channel></rss>
