Sounds

Hi, I used the wiper knob above the Captain seat and after take off experienced a (very annoying) clicking/ticking sound, as if the knob was stuck. Every 15 seconds or so there is an electronic glitch sound. It appears to stop when I position the knob for the wiper to turn on, which obviously isn't ideal for flight. It also gets louder/quieter as I move around the cockpit. I've checked all of my control surface's bindings and there doesn't seem to be anything linked to the wipers, so I don't believe there's an axis causing an issue. Issue here: Inibuilds A350 ticking sound Josh

Using beyond ATC with the A350 and it’s really quiet, I can barely hear the controller, is there a volume control for ATC somewhere?

Ever since the latest update (V1.1.1) i am unable to hear ATC replies. I can hear the pilot's transmissions, but the ATC replies are not audible.

Hello, its nice that this is implemented to prevent long landings, but for some airports its simply a nuisance. Kai Tak for example, I believe lacks NavData, or due to the 50 degree IGS offset, as soon as you start that final turn it starts yelling runway too short, max braking, max reverse during a fairly normal landing. Any way to inhibit the system?

Aircraft: A350-900/-1000 Version: 1.2.1 Simulator: FS2020 Navdata Method: NAVIGRAPH OFP: Not related WASM Error: Not related Specs: 9800X3D, RX 9070 XT 16G, 64G RAM Autosave File: Not related The GPWS Altitude callout seems updated from 1.2.0 to 1.2.1, however the callout quality is obviously much lower than that of 1.2.0. Can the team take a look at what's going on? I'm lucky because I can roll back to 1.2.0 since I backup everything before updating. Thank you.

Since the latest update for MSFS2020 (1.2.1) I can hardly hear anymore flap sounds while this sound was very clear and accurate before. How can the correct sound be brought back? I did not change any sound settings.

Hi, Is there a sound difference between both simulators? It seems MSFS2024 is more accurate. Are there plans to make the MSFS2020 sounds the same?

I noticed that the GPWS sound in the 2024 version of the A350 seems to have been modified, with a more immersive and realistic tone that closely resembles the real A350. However, the 2020 version still retains the original GPWS sound. Can the 2020 version of the A350 be synchronized with this update?

Aircraft: A350-900/-1000 Version: 1.1.8 Simulator: FS2020 Navdata Method: NAVIGRAPH OFP: Not related WASM Error: Not related Specs: 9800X3D, RX 9070 XT 16G, 64G RAM Autosave File: Not related I don't use Navigraph, I enabled BTV by entering a stopping distance in the system. After touch down, BTV activated as normal, but as I apply manual braking and hence disabling the autobrake, the "Autobrake Off" callout was not heard. This had been an issue for me for a long time.

I don't have any sound in external view, I'm attaching a video link as recommended by Joshua. Currently running Version V1.0.12 in MSFS2020 inibuilds A350 No sound external view.mp4

Hello, just tested the new v.1.1.8. Unfortunately in the aft cabin you suddenly hear a very loud noise in idle, which fades away during spool up...

Bonjour, Depuis la dernière mise à jour, je n'entend plus les moteurs extérieur pourtant mes parametre son FS et du EFB son au maximum

I do not hear any cabin announcements in the cockpit. I have PA button turned on to full volume. What do you need to do to trigger them? This is in FS 2020. Thank you

From 3 separate flights i noticed missing several audios. Like landing gear retraction or extension sound. No touchdown sound. Basicaly no ground roll sound. And some badly mixed sounds. The engine start is in the begining good but then it suddenly kicks in and is basicaly an earrape. Outside its an earrape from the begining. Oh and messing with the audio settings in the EFB doesnt help much. I understand that the product will get updates but this badly done audio on release from a product that costs most people 80€+ is questionable. The latest updated didnt fixed any of my mentioned issues.

The reverser on 1.0.10 sounded very strange in FS2020, a bit loud and sounds like wind howling in a cave; it sounds a bit more normal when the aircraft is stationary but when you land and engage the reverser it sounded out of place. Any chance for some tweaks?

Hello inibuilds team, unfortunately the sound logic of the showcase views has still not been fixed despite the many updates. The problem was also explained quite well in this channel: https://discord.com/channels/535246634448191499/1369545529813635073 Specifically, you get the exterior soundscape in the showcase wingview or in the internal views. It would be great if you could fix that problem.

how to fix the no flap sound issue? there is a very soft sound coming out but the unique a350 flap whirl is not coming out.

Over the last two updates the flaps seem to be way too loud to the point where they are louder than the engines, is there anyway to make them quieter

Hello fellow A350 enthusiasts, an hour ago I have installed v1.0.9. The changelog states the the APU sound issue has been fixed. However, the APU still can be heard prominently inside the cockpit even with the cockpit door closed.

There is currently no Aural Alert heard when using the Time Marker function in 2020. I believe this was fixed in 2024 although not in 2020.

Microsoft Flight Simulator 2025.02.27 - 18.47.25.02.mp4 Sorry for the bad quality but I needed to get the file size under 7.81mb

I recently saw this video on tik tok of a SAS A350 and was wondering if the team can create the spool to sound similar to this? https://vm.tiktok.com/ZMS8WjUTW/

Gear stow sound and gear deployment sound are the same audio. The impact sound of the main gear landing is not played. Bump sound is played even though the nose gear has not landed. The impact sound of the nose gear landing is slightly delayed. 2025-05-10_13-55-03_2.mp4

This phenomenon disappears when the camera is moved outside the aircraft. Is this phenomenon a specification?

These 2 sounds are missing my last 2 flight at rotation i used to hear V1,and while landing and taking over the auto brakes to manual i would hear AUTO BRAKE OFF,not hearing all the sudden since new update.