Support
96 topics in this forum
-
first I can't go out of the helicopter second there is no init button on the screen third the master arm won't arm when i press it
-
- 5 replies
- 0 views
- 1 follower
-
-
Whilst I feel largely brushed off by customer service and am not impressed with the responses allegedly coming from the Kwikflight Team, I'm deciding to post it publicly. Because the response "Well the Testers didn't experience it" does not fly. I am also not the only one experiencing it, and ignoring it will not make it go away. Whilst I know different helicopters handle differently, the simple controlability and control usage are stark in contrast. For example I would expect 50% throttle to be that hover point, but anything less than about 80-90 results in sharp altitude loss depending on the stage of flight. Video #1: Comparison between Hunter and S…
-
-
- 3 replies
- 1.4k views
- 2 followers
-
-
Bug 1: Glass in cockpit doesn't show rain drops at all. Screen grab below. Unless I've turned off a setting somewhere. It shows on other aircraft. Bug 2: When first going to the MFD Map (Say at an airport) It shows a really zoomed in view of the map. Showing taxi lanes, buildings etc. Also the Zoom amount on the left says 4. But if you then go to Zoom the map in and out, the closest you can get is 2 then 4 then 8 etc...you can never get it back to the close in View you started with. 2 zoom is still far out. Questions; Just wondered if some odd things are how they should be, like: 1: To fly in a straight line I need a constant boot full of Right ru…
-
-
- 4 replies
- 2.1k views
- 1 follower
-
-
Okay just noticed that ALL the Maints stencils/Decals /rivets etc have a white stroke or something in sim ... i have been looking for the source for a few days and have found nothing... really would be nice to hear from the Kwik Flight staff on this , i also asked when the AH1Z paint kit would be aval back in Feb and have yet to get an answer for that as well , so i am not very optimistic i will receive one regarding this either
-
- 0 replies
- 60 views
- 1 follower
-
-
Hello Kwikflight. I am dealing with some issues trying to fly the hunter. The helicopter tends to pull its nose up and down a lot and also has an almost constant tendency to roll left. It does not respond to the trim commands. Could you please enable the trim for this helicopter? It was close to impossible flying this with my old thrustmaster warthog stick, the stick is too stiff and hard to fly most helicopters. Now i upgraded to an orion2 F-16 ex stick and its better (with a very soft stick setting) but the inability to trim this is causing constant fatigue for my arm. Flying for over a few dozen minutes is causing strain and muscle pain for my arm. I un…
-
- 1 reply
- 116 views
-
-
Whenever I import a plan from the FS web planner since its the only reliable way to get user waypoints in, the FPS drops significantly and causes the MFD to lose all functionality. It drops it from my sim locked FPS of 55 down to 10-15.
-
- 0 replies
- 86 views
-
-
Just keen to know, appears that it was dumped soon after release in a half finished state, thanks.
-
- 3 replies
- 1.2k views
-
-
I purchased this superb plane yesterday and I am very disappointed. No buttons are clickable. I can't close the crew hatch, I can't start the engines, etc...nothing. Others have this problem?
-
- 4 replies
- 1.8k views
-
-
think the b1 has potential, please fix the basic issues with the initial (and v1.01) release: 1) panel/gauge emissive layer not showing, cockpit is totally dark at night. i see the _emit sheets in texture.internal but the panel integral lights are inop. 2) option to turn on/off asobo pilot/co-pilot avatar in vc by clicking on the seat 3) spoiler position gauge inop 4) cockpit spot/map lights are in the line of sight, please move them closer to window frame 5) there's a severe size mismatch between the b1 model and the asobo avatars when looking in using the drone cam: 6) for v1.0.1, the landing light seems inop.
-
-
- 11 replies
- 11.3k views
- 1 follower
-
-
Hi Team, I absolutely love this plane and use it almost everyday on VATSIM. I just have one thing I would appreciate so much if you can fix it. The Pitot Heat does not work and when flying in negative and humidit conditions it freezes and I lose tge speed. Can you please fix this issue that's the only thing I ask for this plane. Thanks, Hugo
-
- 2 replies
- 2k views
-
-
Hello, first of all ..thank you for this awesome Helicopter on Xbox. But i have some issues. 1. In the Cockpit View the camera is jumping/hopping around. Annoying. 2. When i start with a flightplan ( landing Destination) with engine running. The engine is shutting down. Thank you for everything. VID-20260318-WA0000.mp4
-
- 0 replies
- 566 views
-
-
Good Day Kwikflight Team, First let me just start with a compliment on the 3d modeling, she looks beautiful! In control bindings, Throttle and Condition levers, are coded to the collective. This should never be the case. Only one thing should be coded to collective, and that is collective. I am fortunate to have physical hardware with dual throttles and a full collective hardware kit. I would like to assign my controls properly. Any physical control including an xbox controller can have any axis assigned to collective on our end, it should not be hard coded to have all power levers assigned in duplicate on the developer side. Please fix this ASAP. Best …
-
- 1 reply
- 1.1k views
- 1 follower
-
-
Mostly well done but the afterburner visuauls are downright atrocious. Yellow and blueish purple??? Can we try to rectify this and make that appear more realistic?
-
- 1 reply
- 1.1k views
-
-
I have noticed several bugs and issues while using the KwikFlight Striker: Cockpit behavior: Opening the cockpit automatically switches to walking mode, which breaks immersion. In real life, the cockpit door starts open at startup and closes only when the engines are started, but in this aircraft, it is already closed on boarding and cannot be opened. Flight model: When pitching up sharply and lowering the collective, the nose should descend smoothly, but the movement is jerky. Critical bug: Loading the aircraft more than once consecutively in a single game session always crashes the game. This does not occur with other aircraft and s…
-
-
- 8 replies
- 5.4k views
- 2 followers
-
-
1: When clicking on the cockpit handle outside, you should spawn into the cockpit. Position is wrong. As I always find myself sat in the front window looking over the nose. This then has to be corrected by selecting Pilot in the camera settings in the EFB. see jpg below. 2:When in the correct cockpit position it's quite far back. Especially in VR. 3: As nobody has mentioned this, it might be something I'm doing wrong. But I can't turn on any MFDs or DFD screens. It says in the startup info to turn the the two knobs on the top left of each screen. They glow blue. They do nothing. Even if I start with Ctrl-E they don't come on. What am I missing. Just t…
-
-
- 5 replies
- 3.4k views
- 1 follower
-
-
When will a paint kit be avaliable
-
- 0 replies
- 641 views
- 1 follower
-
-
Good start. Just bought the Kwikflight Striker. got the emails, confirmed the payment....There's no sign of it in iniManager. How long until it appears?
-
-
- 2 replies
- 217 views
-
-
Anybody else getting serious collective/power issues in FS2024? I can be on the ground with full collective and it won't lift unless I switch the 'autopilot' on. Likewise, in the air, I can lower the collective to the floor and I'm still up in the sky, unable to get down...? I'm assuming this is because I'm using SPAD to map my bindings rather than natively through FS and probably missing some data values but, without support feedback, I'm still a bit in the dark as to what vars and events to use with this aircraft. Not getting this in FS2020.
-
- 10 replies
- 8.2k views
- 1 follower
-
-
Downloaded the latest update, hoping it would fix my FS2024 issues. No different. Full power, full collective and I'm still sitting on the ground. Hit the "auto pilot" switch and it automatically takes off. Once airborne I can shut the engines off and lower collective to zero and I'm still flying, unable to land. Very disappointed.
-
-
- 9 replies
- 5.5k views
- 1 follower
-
-
Is there no ability to trim the aircraft? Or is this something that I am missing with poor keybinds. I find in straight and level flight the bird wants to roll to the left, I could easily trim this out.
-
-
- 7 replies
- 5.2k views
- 1 follower
-
-
Hi, the legacy mod is very annoyng, i have tryed to shut off the engines with not the requested result, i hope in a easyer sistem like a grab one
-
- 0 replies
- 674 views
-
-
Hey guys, quick question about the Archangel: The in-game checklist seems to be bugged. When I try to find the Canopy switch using the checklist, it highlights the taxi light instead. Does anyone know where the correct switch is?
-
-
- 1 reply
- 1.2k views
-
-
Hello all, I want to ask if and when the KIWIFLIGHT ARCHANGEL will realease on Xbox thanks in advance Mr flight sim
-
- 0 replies
- 653 views
-
-
Hey! in MSFS24 you have the ability to change pilots, there are no military options for the co pilot, can make screenshots a little bit.. yucky! As you can see, any chance of a default pilot with Apache gear on or the option to at least have it?
-
- 0 replies
- 768 views
-
-
Nothing happens after it reaches 100 percent. Weapons still empty, mission manager just stuck unless I cancel the mission or resupply. If I start the request again, when it reaches 100 percent it gets stuck again. This is the 2nd issue ive posted here.... no response for the first one. Does anyone read these?
-
- 8 replies
- 1.1k views
- 1 follower
-