Please could somebody tell me how to turn the fuel valves on (the ENG1 and ENG2 switches just below the throttles).
I've tried setting the following LVars to 1 but they don't work:

A310_ENG1_MIXTURE_COMMAND
A310_ENG2_MIXTURE_COMMAND

I've tried lots of other LVars as well but can't seem to find the right ones.

Thanks

Hey Scott - this is what I have configured direct in MS configs - not certain they are all required but it works for me 🙂

I'll have a look a bit later for the matching lvars but about the only thing I fly with the TCA quadrant atm is the 310 so an occasional swap for the Fenix isn't the end of the world for me

Edited November 24, 20223 yr by b3lt3r

In addition - via Spad I configured the 2 black buttons using A310_ENGx_STARTER => 1 to start it turning

OK - here's what I found in the mobiflight lists - suspect what you need is somewhere here 

 

Thanks @b3lt3r, you've solved the mystery. They've used the wrong controls for the A310.
Instead of using SET ENGINE 1 & 2 FUEL VALVES they've used SET ENGINE MASTER 1 & 2.

Working perfectly now, thanks.