November 15, 20223 yr After landing and starting second leg with blank init page, the second page values are in negative. Negative takeoff weight and fuel. I cannot set V2 speed on MCP and activate it then set 250kts like normal either. The other parts of flight work OK when flying second leg but INIT B values do not calculate correct.
November 16, 20223 yr Heya, just quickly letting you know that I´ll test this tomorrow as I´m about to go to bed. I´ll let you know my findings then 🙂
November 16, 20223 yr Author 2 hours ago, gumbyger said: Heya, just quickly letting you know that I´ll test this tomorrow as I´m about to go to bed. I´ll let you know my findings then 🙂 Thank you! The flight went well but the FMC did not like doing a second leg. I checked the init b page after landing the second leg and the calculations were worse. after 1st leg: after 2nd leg: Edited November 16, 20223 yr by triplesevenbob
November 16, 20223 yr Can confirm this behavior with 2nd flight and even subsequent flights thereafter. ZFW value decreases during/after a flight? Even after entering in correct ZFW and BLOCK after flight 1 and before flight 2, the TOGW is incorrect.
November 16, 20223 yr Author 15 hours ago, gumbyger said: Heya, just quickly letting you know that I´ll test this tomorrow as I´m about to go to bed. I´ll let you know my findings then 🙂 After that happened last flight on my new flight this evening, I could not activate the V2 speed and then set 250. I push in speed dial and nothing lights up.
November 16, 20223 yr Author One more odd bug? found is no more minimum callouts on my flights. How can I reset everything?
November 17, 20223 yr Sorry for the long turnaround time for this! I just completed a flight and set up a new one directly afterwards and I can´t replicate this. I know this is a hassle, but could you please try with an empty community folder?
November 17, 20223 yr Author 14 minutes ago, gumbyger said: Sorry for the long turnaround time for this! I just completed a flight and set up a new one directly afterwards and I can´t replicate this. I know this is a hassle, but could you please try with an empty community folder? My weights were pounds not kgs if that helps. And panel state I loaded the on GPU. I may have time this weekend to try it again with a clean install. Edited November 17, 20223 yr by triplesevenbob
November 17, 20223 yr 6 minutes ago, triplesevenbob said: My weights were pounds not kgs if that helps. And panel state I loaded the on GPU. I may have time this weekend to try it again with a clean install. I did it with kg, so maybe there is the issue. I shall try again tomorrow with pounds 🙂
November 17, 20223 yr 24 minutes ago, gumbyger said: I did it with kg, so maybe there is the issue. I shall try again tomorrow with pounds 🙂 My flights are done in pounds as well so maybe there is a connection there... And fwiw, after loading into the plane I select "on apu" panel state. Additionally, after landing, I use APU not GPU or external ground power while at the gate setting up next flight.
November 17, 20223 yr Author 15 hours ago, gumbyger said: I did it with kg, so maybe there is the issue. I shall try again tomorrow with pounds 🙂 Uninstalled both A310s from content manager. Installed new. Still cannot set V2 speed and activate it on MCP.
November 18, 20223 yr On 11/17/2022 at 7:36 PM, triplesevenbob said: Uninstalled both A310s from content manager. Installed new. Still cannot set V2 speed and activate it on MCP. But I can see the V2 set in your FMC though?
November 19, 20223 yr Author 4 hours ago, gumbyger said: But I can see the V2 set in your FMC though? I updated to the MSFS Beta and now I can set V2 and then activate it and set 250kts after. I could not before.
Create an account or sign in to comment