Hi,

I would like to stress that I want to create a constructive discussion here, without throwing any insults, like I was able to see on the Synaptic Discord.

It is obvious from many Youtube videos, especially from Youtubers who are known for having a high end PC, that the Synaptic A220 is not very well optimized, and for example there is a visible significant stuttering, for example in A330Driver videos. I guess part of it stems from the A220 not having a native 2024 version.

Could you please elaborate on your plans regarding this issue? I don't believe that a "smaller" airliner, like this, has a right for being this performance heavy (when compared to the A380 for example).

Thank you!

i think it's tied to the amount of calculations that are done by the FMS. Seems that these type of FMS, like also A350 and A380, are terribly hungry on resources despite the size of the plane. Probably all the pages are working and calculating constantly compared to other FMS like A320 or Boeings.. just my two cents.

I'll pass this feedback along to our team. I can't say for sure why some streamers have performance issues and others aren't, but that goes for about half of the problems people have in simming in general. Thank you :)

I agree, something is really not optimized here. I can fly the A350 with 60FPS but with the A220 I barely get 19FPS inflight. Strangely enough on ground it was fine.
Apart from the performance, plane looks and feels amazing!

Edited 7 hours ago7 hr by flyaviation

I have the same issue as @flyaviation mentioned. The ground is great with little to no stutters even with intense scenery. However, as soon as I get airborne, the stutters hit hard and I drop to around 20 frames. PC Specs: 7800x3d, 32gbs ddr5, Zotac 5070

Same for me. On the ground the FPS was perfect at around 60. Once in the air, I barely get 20FPS.
Specs: Ryzen 7 5700X, 32GB DDR4 and RX9070
I've attached a screenshot of MSI Afterburner. CPU and GPU seem to be bored in flight, however FPS is really bad.

Yup, same here... the minute I get airborne, the FPS drops to almost zero with a terrible stutter.... However, I've got no issues with the A350. I've decided not to fly the A220 until something is done...

I have noticed, when I program the FMS frame rate drops significantly. It must be the calculations dropping the frames and not the model itself.

Intel I9 and 4090 here, INI please do something about the performance. I dont know how mid range systems can fly this at all!

I too got airborn and noticed a huge performance drop. I realized that for some reason, if you have the Route page open on any of your displays, it kills the frames and causes lots of stutters. As soon as I switched out of the Route page, the performance went back to normal. Kind of frustrating though anytime you have to do a DIR to or make changes to the flight plan, you have to fight through the lag. Not sure why this happens, but hopefully this helps you

7 minutes ago, MaxiMoose said:

I too got airborn and noticed a huge performance drop. I realized that for some reason, if you have the Route page open on any of your displays, it kills the frames and causes lots of stutters. As soon as I switched out of the Route page, the performance went back to normal. Kind of frustrating though anytime you have to do a DIR to or make changes to the flight plan, you have to fight through the lag. Not sure why this happens, but hopefully this helps you

Thanks for the tip 👍