I saw that the recent 1.0.6 update addressed a bug I reported regarding the reverse animation not happening when activating reverse using the joystick method that uses the HOLD THROTTLE REVERSE THRUST button.

Reverse thrust animation not working - Systems - iniBuilds Forum

It turns out the update '''solved'' this bug by creating another one. Now, when I activate the button assigned for HOLD THROTTLE REVERSE THRUST on the joystick, instead of simply making the throttles to enter reverse mode so I can control the reverse power via the throttle axis, it activates full reverse instead, and I can't control the power via axis, which is totally counterintuitive.

This is the 3rd different bug I've encountered regarding reverse in iniBuilds L1011. I hope I don't have to come back here again to report the 4th.

Edited 8 hours ago8 hr by edu2703
Small change for better clarity

I have this behaviour too.

9 hours ago, edu2703 said:

It turns out the update '''solved'' this bug by creating another one. Now, when I activate the button assigned for HOLD THROTTLE REVERSE THRUST on the joystick, instead of simply making the throttles to enter reverse mode so I can control the reverse power via the throttle axis, it activates full reverse instead, and I can't control the power via axis, which is totally counterintuitive.

Can I suggest setting it to TOGGLE THROTTLE REVERSE THRUST instead for this function? If its a button you intend to use while its held, set it to toggle both ON PRESS and ON RELEASE.

2 hours ago, richboy2307 said:

Can I suggest setting it to TOGGLE THROTTLE REVERSE THRUST instead for this function? If its a button you intend to use while its held, set it to toggle both ON PRESS and ON RELEASE.

That basically works BUT

Owners of throttle quadrants (HC Bravo etc) probably like to have toggles for each engine and applying (reverse-) thrust with each lever separately.
Should not be a biggy, since the commands are already there ...