Airplane does not follow the FP when INS Mode is activated (1.03)

[Norwenkel]

Strange things happens when updating the plane and starting direct on the runway:

IRS is aligned and switched to nav mode automatically. The FP is imported into the INS and shown on the screen. WP 0 to 9 are set. But now, after engaging the AP and INS mode in flight the plane does not follow the FP. Changing waypoint tracks 2- 3 or 2- 5 as a "direct to" has no effect. The plane keeps it initial heading. Using the GNS and setting Navigation to VOR FP will be followed as it should do.
I’m lost. May you have some hints.

[RyanAlmeida95]

Have you selected INS instead of RADIO (near the NAV tuning)

[Norwenkel]

Shure i did it even on both sides 

[MrGarak]

Same issue here with 1.0.3, I usually use the "Ready for Takeoff" panel state. I tried a cold and dark and didn't seem to have the issue. 

[Norwenkel]

49 minutes ago, MrGarak said:

Same issue here with 1.0.3, I usually use the "Ready for Takeoff" panel state. I tried a cold and dark and didn't seem to have the issue. 

Therefore it seems to be bug to be logged and solved.

[Nikita2024]

Read elsewhere that some of the Panel States are buggy and that this is known