[Known Issue] T/D disappear in version 1.24

[91868]

I have updated to the latest 1.24 version, but the VNAV issue still persists. When I lowered the altitude to below 21,000 feet, the T/D indicator disappeared and the aircraft prematurely entered the DES mode.I conducted tests using the autosave file created in version 1.23. Subsequently, I will test with the file created under version 1.24. It can be said that this issue might still not have been resolved at present.

[Hannibal_3107]

Same issue confirmed on my side. Really annoying BTW.

[Aaron Anderson]

Wow, what's going on with iniBuilds lately?  Why are you guys not making the slightest effort to beta test new builds before releasing?  This kind of stuff is really making iniBuilds look bad.   

Edited Wednesday at 06:10 PM by Aaron Anderson

[LineDX]

Had the same issue in 1.2.3. Haven't tested 1.2.4 yet.

Did you guys try it clearing wasm folder and do a quick flight again to see if it presists after clearing the wasm. 

[iniSteven]

8 hours ago, 91868 said:

I have updated to the latest 1.24 version, but the VNAV issue still persists. When I lowered the altitude to below 21,000 feet, the T/D indicator disappeared and the aircraft prematurely entered the DES mode.I conducted tests using the autosave file created in version 1.23. Subsequently, I will test with the file created under version 1.24. It can be said that this issue might still not have been resolved at present.

Please don't report bugs that occur when loading an autosave from a previous version. As the previous version had an error causing DES mode to activate prematurely, it's likely the descent flag had already been triggered and this was baked into the save.

We did multiple full flights in 1.2.4 testing both the cruise step descent behavior and the final descent behavior.

[stephan79]

issue still persist with 1.2.4 (fresh install performed).

[91868]

9小时前，iniSteven说：

请不要报告从以前的版本加载自动保存时出现的错误。由于以前的版本存在导致DES模式过早激活的错误，因此可能已经触发了下降标志，这被烘烤到保存中。

我们在1.2.4中进行了多次全飞行，测试了巡航台阶下降行为和最终下降行为。

Even if you start a completely new flight, the problem still exists. So please double-check, especially in the situation where you are preparing for the descent. When the descent altitude is set below 21,000 feet, the TD will disappear and the aircraft will enter the DES mode earlier.

[RZ225]

Yes the issue is still there. @iniBuilds TeamJust had a flight to test. The TOD disappeared once the altitude was lowered. Please fix.

[LineDX]

The issue still exists. Please fix it. @iniSteven  @IniJamir

[yves3550]

Same here;
I will revert ti 1.2.1 until fixed

 

Yves

Edited yesterday at 04:42 PM by yves3550

[IniJamir]

Hello all, the issues have been noted and passed along to the team, I'm going to lock this thread now and any and all question/comments and concerns regarding this issue can be directed to here until the next update, thank you.