udidwht Posted January 30 Posted January 30 My inimanager for KLAX Enhanced... MSI Codex Series R2 B14NUC7-095US Windows 11 Home 25H2 26200.7628 i7 14700F MSI Pro B760 VC Wifi II (AMI BIOS 7D98vBG 2025-09-04) RTX 5060ti OC (591.86) 32GB DDR5 5600mhz 2TB MSI M482 nVME (C:) Neo Forza NFS011SA31T-60 SCSI Disk Device (E:) Kingspec SATA SSD 4TB (I:) 4TB SPCC SSD 4TB (D:) 4TB Crucial CT4000P3PSSD8 nVME (F:) Seagate Backup+ Drive (G:) 650w Gold PSU
mmcmah Posted January 30 Posted January 30 I have no configuration options for YBBN, even though I have them for other IiniBuilds airports. This is with iniManager 2.50 installed, as I purchased the airport at the KDFW launch sale.
IniJamir Posted January 31 Posted January 31 Hi, Sorry you are having this issue, please try clearing your cache folders found in %appdata% > Local and Roaming. You can also try uninstalling and reinstalling the scenery. Hopefully this helps.
mmcmah Posted January 31 Posted January 31 13 minutes ago, IniJamir said: Hi, Sorry you are having this issue, please try clearing your cache folders found in %appdata% > Local and Roaming. You can also try uninstalling and reinstalling the scenery. Hopefully this helps. Thank you for the suggestions. I deleted the contents of the "Cache" folder in the iniManager folder in Roaming (there wasn't one in Local) and then relaunched iniManager, which resulted in no change. Then I deleted those same contents again and uninstalled and then reinstalled the scenery and then relaunched iniManager... No change - there are still no configuration options in the scenery page. Any other suggestions?
mmcmah Posted January 31 Posted January 31 (edited) I even uninstalled and then reinstalled iniManager. No change - still no configuration options. Edited January 31 by mmcmah
IniJamir Posted January 31 Posted January 31 4 minutes ago, mmcmah said: I even uninstalled and then reinstalled iniManager. No change - still no configuration options. Darn, I will push this issue to the team, I am sorry for the inconvenience at this time. If it is any consolation, YBBN is one of the less intensive sceneries as all of the configuration options are low impact, but I do understand the frustration of not being able to fully control the product you paid for.
mmcmah Posted January 31 Posted January 31 7 minutes ago, IniJamir said: Darn, I will push this issue to the team, I am sorry for the inconvenience at this time. If it is any consolation, YBBN is one of the less intensive sceneries as all of the configuration options are low impact, but I do understand the frustration of not being able to fully control the product you paid for. Many thanks. Yes, it's more about the quirks of iniManager more than needing to disable certain features. Thanks again.
IniJamir Posted January 31 Posted January 31 Hello all, I have moved this issue into the IniManager Section and re-labeled it as both of you have encountered the issue of scenery configuration options disappearing and it is no longer contained to one scenery.
IniJamir Posted February 1 Posted February 1 Hello, It has come to my attention that shutting down the IniManager completely via Task Manager and then re-opening the Manger has apparently worked in resolving this issue of configuration options not appearing. @mmcmah @udidwht Let me know if this helps.
Roders Posted Monday at 02:26 PM Posted Monday at 02:26 PM On 2/1/2026 at 1:51 AM, IniJamir said: Hello, It has come to my attention that shutting down the IniManager completely via Task Manager and then re-opening the Manger has apparently worked in resolving this issue of configuration options not appearing. @mmcmah @udidwht Let me know if this helps. Hi there, I can confirm this does not work on my end. Still no configuration options for any airports after trying all the suggested fixes. Best, Roderick.
Roders Posted Monday at 02:40 PM Posted Monday at 02:40 PM (edited) @IniJamir For me this is only affecting airports installed after the iniManager 2.5.0 update - airports I had installed prior to the update still have config options available to choose from. Edited Monday at 02:41 PM by Roders 1
IniSteve Posted Monday at 02:52 PM Posted Monday at 02:52 PM Hi. We have resolved a server-side error that was causing this to happen and will push a client update shortly. Thanks for your patience.
Solution IniSteve Posted Monday at 05:00 PM Solution Posted Monday at 05:00 PM All - Please refresh the manager client. It should force update to version 2.5.1 which will resolve the issue of missing config files. Alternatively, you can manually download the client here - IniManager V2 – iniBuilds StoreNOTE: You must reinstall any affected airports to get the config options to show. Thanks!
Roders Posted Monday at 05:35 PM Posted Monday at 05:35 PM 34 minutes ago, IniSteve said: All - Please refresh the manager client. It should force update to version 2.5.1 which will resolve the issue of missing config files. Alternatively, you can manually download the client here - IniManager V2 – iniBuilds Store Thanks! Thanks - might be worth mentioning that you have to reinstall the affected airports and then quit iniManager via the control panel. I now have my config options! Appreciate the help! 2
Recommended Posts