Dear Inibuilds,

its been a while since this the "brakes hot" warning is there and so far is still not solved. I am getting this warning in almost every flight even though i am barely pressing the brakes..

many thanks! 

5 hours ago, felipeturbay said:

Dear Inibuilds,

its been a while since this the "brakes hot" warning is there and so far is still not solved. I am getting this warning in almost every flight even though i am barely pressing the brakes..

many thanks! 

Well, what's the temperature of your brakes when the warning comes up?

Hi, 300C roughly, but as I said I don’t now how this temperature is reached since I am set low autobrakes and the manual braking barely pressing the brakes since I had enough runway. It is not the first time that this happens to me…

2 hours ago, felipeturbay said:

Hi, 300C roughly, but as I said I don’t now how this temperature is reached since I am set low autobrakes and the manual braking barely pressing the brakes since I had enough runway. It is not the first time that this happens to me…

Well the BRAKES HOT message comes on when the brakes go above 300c. How heavy is the plane? Depending on the weight it can be very easy to end up with hot brakes after landing.

I’ve also noticed getting this even with a light aircraft and using BTV with a far away exit, well over 3000m away.

If I recall correctly, the A300 also went through a phase of excessive brake temperatures despite minimal brake usage, that again, if I recall correctly, was fixed in an update.

Edited January 16Jan 16 by dectenor2

1 hour ago, dectenor2 said:

I’ve also noticed getting this even with a light aircraft and using BTV with a far away exit, well over 3000m away.

If I recall correctly, the A300 also went through a phase of excessive brake temperatures despite minimal brake usage, that again, if I recall correctly, was fixed in an update.

I've been flying quite a bit and have not had a BRAKES HOT ecam on any landings recently - are you having it on every flight?

5 hours ago, iniSteven said:

I've been flying quite a bit and have not had a BRAKES HOT ecam on any landings recently - are you having it on every flight?

I have yes.

I haven't done many flights as still waiting/hoping for lots of bugs to be fixed, but I saw it on both flights I did yesterday. It was quite a short turnaround and not the longest of flights so it is possible there was some residual heat on the second flight which was into a long runway and shouldn't have heated the brakes that much.

I will do another flight tomorrow and make sure I fly to a long runway and select a BTV exit right at the end and see what happens.

 

Same issue on my side. Interesting though that this has become an issue just recently although I cannot remember a specific version when it started. 

Hello,

I wanted to bump this thread. I experience the same issue now, and I am pretty sure it did not occur before. I've landed with low braking just like dectenor2 said BTV far at the end of the runway. I exited the runway with about 80C and when I taxi to the gate the temperature goes up really quickly and goes beyond 300C without any manual braking.

And I did check my brakes, they were fully released.

Hopefully you'll be able to fix this little bug.

On 2/20/2026 at 5:46 PM, JetVectr said:

Hello,

I wanted to bump this thread. I experience the same issue now, and I am pretty sure it did not occur before. I've landed with low braking just like dectenor2 said BTV far at the end of the runway. I exited the runway with about 80C and when I taxi to the gate the temperature goes up really quickly and goes beyond 300C without any manual braking.

And I did check my brakes, they were fully released.

Hopefully you'll be able to fix this little bug.

I am on version 1.2.6 and I am having exactly the same issue. After landing and at the end of the taxing breaks temp jumps to 300C. Something gets wrong since last update!