felipeturbay Posted January 15 Posted January 15 Dear Inibuilds, its been a while since this the "brakes hot" warning is there and so far is still not solved. I am getting this warning in almost every flight even though i am barely pressing the brakes.. many thanks! 1
iniSteven Posted January 15 Posted January 15 5 hours ago, felipeturbay said: Dear Inibuilds, its been a while since this the "brakes hot" warning is there and so far is still not solved. I am getting this warning in almost every flight even though i am barely pressing the brakes.. many thanks! Well, what's the temperature of your brakes when the warning comes up? AMD 7800x3d - 64gb RAM - nVidia RTX 5080
felipeturbay Posted January 16 Author Posted January 16 Hi, 300C roughly, but as I said I don’t now how this temperature is reached since I am set low autobrakes and the manual braking barely pressing the brakes since I had enough runway. It is not the first time that this happens to me…
iniSteven Posted January 16 Posted January 16 2 hours ago, felipeturbay said: Hi, 300C roughly, but as I said I don’t now how this temperature is reached since I am set low autobrakes and the manual braking barely pressing the brakes since I had enough runway. It is not the first time that this happens to me… Well the BRAKES HOT message comes on when the brakes go above 300c. How heavy is the plane? Depending on the weight it can be very easy to end up with hot brakes after landing. AMD 7800x3d - 64gb RAM - nVidia RTX 5080
dectenor2 Posted January 16 Posted January 16 (edited) I’ve also noticed getting this even with a light aircraft and using BTV with a far away exit, well over 3000m away. If I recall correctly, the A300 also went through a phase of excessive brake temperatures despite minimal brake usage, that again, if I recall correctly, was fixed in an update. Edited January 16 by dectenor2
iniSteven Posted January 16 Posted January 16 1 hour ago, dectenor2 said: I’ve also noticed getting this even with a light aircraft and using BTV with a far away exit, well over 3000m away. If I recall correctly, the A300 also went through a phase of excessive brake temperatures despite minimal brake usage, that again, if I recall correctly, was fixed in an update. I've been flying quite a bit and have not had a BRAKES HOT ecam on any landings recently - are you having it on every flight? AMD 7800x3d - 64gb RAM - nVidia RTX 5080
dectenor2 Posted January 17 Posted January 17 5 hours ago, iniSteven said: I've been flying quite a bit and have not had a BRAKES HOT ecam on any landings recently - are you having it on every flight? I have yes. I haven't done many flights as still waiting/hoping for lots of bugs to be fixed, but I saw it on both flights I did yesterday. It was quite a short turnaround and not the longest of flights so it is possible there was some residual heat on the second flight which was into a long runway and shouldn't have heated the brakes that much. I will do another flight tomorrow and make sure I fly to a long runway and select a BTV exit right at the end and see what happens.
Tilo Wilfert Posted January 17 Posted January 17 Same issue on my side. Interesting though that this has become an issue just recently although I cannot remember a specific version when it started. 1
JetVectr Posted 2 hours ago Posted 2 hours ago Hello, I wanted to bump this thread. I experience the same issue now, and I am pretty sure it did not occur before. I've landed with low braking just like dectenor2 said BTV far at the end of the runway. I exited the runway with about 80C and when I taxi to the gate the temperature goes up really quickly and goes beyond 300C without any manual braking. And I did check my brakes, they were fully released. Hopefully you'll be able to fix this little bug.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now