I've tried with rudder tiller both on and off but same result. In external view the wheel turns but nothing is happening...

I'm having the same problem, no steering control as soon as Iland. 

Suffering from the same. 

When steering, the NWS moves according to the tiller inputs, but airplane remains on it's initial heading.

On 3/22/2025 at 7:53 PM, sk0941 said:

I've tried with rudder tiller both on and off but same result. In external view the wheel turns but nothing is happening...

Are you still experiencing this problem?

Same problem in 1.0.6.

Checked all settings like Auto Tiller Disconnect etc. 

Tryed to chagne ruder controls tilller. same error....

I use a seperate tiller, this is working fine on all other planes.

Hi sorry we're not able to reproduce the issue currently internally or amongst any of our testers.

Having both tiller and rudder axis assigned to different hardware, and trying both to link them via the RUDDER CONTROLS TILLER option or not. Not seeing the issue across any phase of flight (pre or post).

In case you're having this issue consistently,  I'd recommend trying with an empty community folder (only A350 installed) to rule out any sort of addon conflicts.

To run with a blank community folder without losing your addons:

1. Rename your existing community folder to ``_Community``
2. Create a new ``Community`` folder in its place.
3. Copy only the ``inibuilds-aircraft-a350`` folder inside it.
4. Run the sim and see if same problem persists.

After finished testing, you can close the sim, and restore your original folder as follows:

1. Delete the new ``Community`` folder you made
2. Rename the ``_Community`` folder back to ``Community``

Thanks!

Experienced the same issue today using 1.0.7. - Issue after push back, with or without GSX. Cleared the WASIM, same issue. I gave up and went back to the Fenix for the afternoon which works fine.

For those of you experiencing this issue, can you please create a custom save when your tiller is unresponsive, and share the save ".bin" file with us here? This may help to reproduce the issue.

For instructions on how to create custom autosaves and where to find the save files see:

Thanks!