Total freeze after last update

[Swisspilot1986]

during taxiing with all systems set for TO my entire sim freezed so I had to leave MSFS by leaving Windows. Please confirm I'm the only one in this case!

[richboy2307]

Hi @Swisspilot1986

Can you confirm if you cleared your WASM folder after updating?

While the sim should handle this for you automatically on first launch after an update/reinstall, we have seen it not happening for some users so you should also try to manually clear your WASM folders.

Clearing WASM Folders
- Delete all contents on the file paths (Work folder and all .dlls)
- FS20: https://forum.inibuilds.com/topic/24996-how-to-clear-the-wasm-folder/
- FS24: https://forum.inibuilds.com/topic/24917-how-to-clear-the-wasm-folder/

If you still have the crash, please don't close the sim. Use the below guide to verify and report the WASM crash with all the requested information, especially reproduction steps. 

Thanks!

[Swisspilot1986]

yes WASM was cleared before installing the update in MSFS2024

[LH4371]

not fully my topic, updated and cleared the WASM cache but during cockpit prep the MCDU reaction got worse, quite laggy actual. cursor not very reactive, clicking often only accepted after second click. again, it worked but became laggy. this was not from the very beginning, though. it started during cockpit prep after I loaded SB flightplan and configured the MCDU fully. enroute now all semmingly fine again, maybe just a hickup. FWIW

[MPO910]

1 hour ago, Swisspilot1986 said:

yes WASM was cleared before installing the update in MSFS2024

Did you use Injected AI Traffic and had turned the TCAS on? Or did you leave TCAS on standby?

TCAS ON had several Freezes for me in follow.....leaving it on standby during my flights all went well. I did not try it after the 1.0.3 update though. IniBuilds stated it should be fixed now with 1.0.3

Edited March 12 by MPO910

[Swisspilot1986]

I use traffic from FlyByWire and I only turn on TCAS on TA/RA during line-up, so it's on standby during taxi where the freeze arised. I've remade my entire flight and now I'm still flying in cruise. Cross fingers!

[MPO910]

41 minutes ago, Swisspilot1986 said:

I use traffic from FlyByWire and I only turn on TCAS on TA/RA during line-up, so it's on standby during taxi where the freeze arised. I've remade my entire flight and now I'm still flying in cruise. Cross fingers!

Be aware, the TCAS freeze with 1.0.2 occured also after hours in flight, but most often during Taxi, LineUp and as I experienced also while on TakeOff roll and shortly after Lift Off.

Report how it goes for you, that would be nice and much appreciated. I keep my fingers crossed for you!

[DroneSim]

v1.0.3 - FS24 - A359 (No Cabin)

I just completed a flight from Colombo (VCBI) to Malé (VRMM). Turned on TCAS while taxiing. Did not encounter any crashes. Seems to be fixed with 1.0.3.

Edited March 12 by DroneSim

[Swisspilot1986]

ok we hope so, so the team can care other items we pointed out while we can at least fly. 

[MPO910]

I am almost 5 hours in from LFMN to FMEE.....and no issues BUT TCAS is off, I don´t want to risk it today... 😉 

[DroneSim]

v1.0.3 - FS2020 - A359 (No Cabin)

Again, I just completed the exact same flight from Colombo (VCBI) to Malé (VRMM). This time in MSFS 2020. Turned on TCAS while taxiing. Did not encounter any crashes. Seems to be fixed with 1.0.3.

Edited March 12 by DroneSim