Wing modeling as a whole

[C. Schaffhausen]

After looking at this comparison video, you can see a few issues with the Inibuild A350's wing

• Flap Track fairing - incorrect shape.
• Sharklet - incorrect shape.
• Wing - looks like the chord is too long, which also resulted in a bigger sharklet in sim
• At 2:50, after second engine start, you can see the spoilers raised a tiny bit. I believe the same feature existed on the FBW A380, and was done IRL so the spoilers and the flaps don't scrape with each other during extension/retraction.
• Flap position and geometry: after flap extension, you can see a gap exist between the flaps and the spoiler on the real thing; while the Inibuilds one just doesn't have it
• From another post: Gap between inboard and outboard flap is missing; related the flap position and geometry
• Speedbrake extension: extends/retracts too quickly

There is still a long way ahead for the A350, but I remain hopeful as Inibuild brought us a relatively good product in a short time. Hopefully the devs can look at the above issues. Cheers

Video link: 

 

Edited March 12 by C. Schaffhausen
Missing video link

[Tripdog87]

Darialove had a good point on this with regards to the outboard spoiler and landing gear animation. If I had to guess I would say the developers are/were trying to figure out this wasm crap first as it was probably more immediate. I agree with you though, there is definitely some TLC needed with those wings and flaps.

[C. Schaffhausen]

Tried my best to capture the same angle in the sim, the first one is taken by myself. The more I look at the inibuilds, the more it looks like an A330 wing.

 

There seems to be some issue with the flap modelling/spoiler position, on the real plane the blue line intersects the orange line dividing the orange line roughly in half

 

Where as on the inibuilds model, the ratio is quite different.

[haza2]

I will send your feedback to the team for review. Thank you.

[C. Schaffhausen]

Thank you! A fair comparison here from a Finnair A359.

 

Edited March 12 by C. Schaffhausen

[darialove]

12 hours ago, C. Schaffhausen said:

Tried my best to capture the same angle in the sim, the first one is taken by myself. The more I look at the inibuilds, the more it looks like an A330 wing.

 

There seems to be some issue with the flap modelling/spoiler position, on the real plane the blue line intersects the orange line dividing the orange line roughly in half

 

Where as on the inibuilds model, the ratio is quite different.

😉I think the real flap track fairing looks larger than the one in the sim.

[C. Schaffhausen]

I think they might have used the same flaps and models for both variants. The -1000 has slightly larger wings where the trailing edge is extended slightly, which is similar to the Inibuilds model. Here's a -1000 wing for reference.

[ykeyre]

This bit here needs some adjusting.

[Swisspilot1986]

Is this add-on not licensed by Airbus? Can't Airbus give real technical plans to help Inibuilds?

[C. Schaffhausen]

I'm sure something here has mentioned already, but I'll mention here as well. The shape of the flaps, and lines along the trailing edge, is quite inaccurate.

*Original screenshot

*Non-edited shot for reference 

The pictures should explain why I think the current A350 wing looks like an A330 port. Not only the A350's system has its issues, the model also desperately need a v2 upgrade. I hope the team can take some time to reflect how to capture the essence of the modelled aircraft; while the current model looks ok, I don't think it captured the aerodynamic shape that makes the aircraft so efficient, which is a big deal for the A350. Otherwise, the A380 project would likely suffer from the same problem. Thank you team, for your effort!

Edited April 24 by C. Schaffhausen

[Eddie]

Hello,

This is feedback that we have received and already with very very detailed references and information. We are discussing it internally on how to proceed. I don't have any updated information regarding this. 

I do want to clear up the fact that this was NOT an A330 port. It was created with whatever technical data we had at hand. We do note certain inaccuracies and we'll see what we can do, but this is not a promise of a change, but a promise that we have indeed discussed this internally.

Thank you for the effort nonetheless!