berkkp Posted July 19 Posted July 19 When in the A300, in v1.1.2, regardless of variant, ATC voices, except the own Pilot's voice are not audible, regardless of how the volume knobs are set.
S.Sabel Posted July 19 Posted July 19 Hello, I can confirm the problem. I also had some luck with the Morse codes from VORs, for example. These could only be heard very (very) quietly. Turning and switching the volume controls and buttons on the radio console brought no improvement (in both cases).
Flugkapitan Posted July 20 Posted July 20 I can confirm this as well. There are not any MSFS 2020 ATC voices (including ATIS), however, I am hearing the voices from the FS ATC Chatter add-on.
richboy2307 Posted July 22 Posted July 22 Thanks everyone, logged. We'll look into it. 3 1 Vrishabh Sehgal ( @Richboy2307 ) Community Team Member & Tester IniBuilds Ltd. | inibuilds.com
dc10boy Posted July 22 Posted July 22 Dang it! Against my better judgement I updated the Airbus. Now all ATC voice including ATIS is gone.
dc10boy Posted July 23 Posted July 23 Doing some troubleshooting, it doesn't make any difference if you use Azure, or offline mode, and no changes in radio panel config have any effect.
Alexair Posted July 28 Posted July 28 and got same issue not only with the A300 but with all MSFS aircraft as well and VATSIM !
S.Sabel Posted July 29 Posted July 29 On 7/22/2024 at 2:21 PM, richboy2307 said: Thanks everyone, logged. We'll look into it. A quick hotfix would have been nice! Which airliner is allowed to fly without working radios? ;-) It's already July 29th... 1
dc10boy Posted July 30 Posted July 30 I have a couple of good friends from work that on my recommendation ordered the A300. Both of them had fresh installs, and both of them have no ATC voice with the A300 but works fine with other aircraft. This is widespread, being reported on Avsim, other forums, Discords, and FB groups. First reported on the 19th. The silence is deafening.
CutBait Posted August 3 Posted August 3 (edited) Same issue. Checked radio settings and volume, different frequencies and finally reinstalled. Tested multiple liveries (incl iniBuilds default) and airports. A310 works fine. Edited August 3 by CutBait
Flugkapitan Posted August 3 Posted August 3 Just tried out the A320Neov2 from Inibuilds. No default ATC in that aircraft as well.
dc10boy Posted August 3 Posted August 3 More troubleshooting, emptied community folder, no toolbar pushback, no addons at all. No change, no sound.
richboy2307 Posted August 7 Posted August 7 On 8/3/2024 at 10:25 AM, Flugkapitan said: Just tried out the A320Neov2 from Inibuilds. No default ATC in that aircraft as well. Not an issue on the A320neo V2. This issue is specific to the A300, due to the XML rewrite of all the switches in that plane as part of the performance optimization. For the A20N, please ensure you have configured the ACP properly: Thanks! Vrishabh Sehgal ( @Richboy2307 ) Community Team Member & Tester IniBuilds Ltd. | inibuilds.com
Flugkapitan Posted August 7 Posted August 7 Thanks for the response! Operator error on my part. Default ATC works just fine.
richboy2307 Posted August 13 Posted August 13 As advised, we're aware of the issue and are working on it. The fix will be included in the next update whenever its ready, no ETAs. Thanks! 1 1 Vrishabh Sehgal ( @Richboy2307 ) Community Team Member & Tester IniBuilds Ltd. | inibuilds.com
JKelly Posted August 16 Posted August 16 Same problem here with the A300-600F, I can hear my atc transmissions and see the return atc transcripts but I can't hear them or other aircrafts atc sound. I have the latest updates installed.
S.Sabel Posted August 22 Posted August 22 Come on guys, the planes have been grounded for 30 days now because of the faulty radio. Why can't this problem be fixed with a small patch? Do we really have to wait for the next big update?
Recommended Posts