Nopatio Posted April 16 Share Posted April 16 Hello, it look like I have got a problem! When I load the A-310 from cold and dark, I can´t get any light in the glareshield. But if I load it as ready for takeof, it is there. I can't find the contact that do the trick. It should be under the glareshield, but if that the one, it is not working. And I can't fly without knowing the speed, height etc. Link to comment Share on other sites More sharing options...
gumbyger Posted April 16 Share Posted April 16 Heya! You can change the brightness with this turning knob here 🙂 Link to comment Share on other sites More sharing options...
Nopatio Posted April 16 Author Share Posted April 16 Yes, I can turn the knob, but it have no effect at all.🤥 It is like there are no electric connection. When I am loading the aircraft, and the yellow bar saying ready to fly, the light is on, but as soon I press the sign, the light dissapear! But if I choose the "ready to takeoff" button on the EFB, the light is ON, so somewhere in between, from cold and dark, and to takeoff, there must be somewhere to turn the glareshield ON and OF, but where? Ready for takeoff The light is ON at "Ready to fly"; Link to comment Share on other sites More sharing options...
gumbyger Posted April 16 Share Posted April 16 Ah.. well.. It might be good for you to watch our tutorial series or follow the insim checklists 🙂 It's not quite as easy as an A320 😄 You'll need to flip the pitch trim switches in the overhead panel for the FCU to light up. Here is the tutorial series: Link to comment Share on other sites More sharing options...
Nopatio Posted April 17 Author Share Posted April 17 I am humble and a little ashame, so thank you so much😳 Link to comment Share on other sites More sharing options...
Recommended Posts