azm30

Thank you for your help

OK - So I need a flight plan - and then - set a DIR TO waypoint? I hope I have understood

Hello all I have read the topic : "https://forum.inibuilds.com/topic/24979-how-to-direct-to-dir-to-a-waypoint-via-the-mfd-fms-or-nd/" But it does not work. What I do : I am ready to fly on a runway I have not set any FPLN I just want to set an AIRPORT as a DIR TO Waypoint I click on the DIR knob - set my airport name - Insert it as TMPy .. But when I go to the FPLN I stay on PPOS .. Thank you for your help and ...advices

Hello all I am using this great AIRCRAFT starting in FS2020. Now in FS2024 and before SU5 all was running fine. But now I have these problems 1 - If I start a flight and choose a runway (so not in Cold and Dark), the aircraft crashes but the sim set it "in the right way" .. 2 - I have got a WASM pronlem (orange screen) and had to restart the sim 3 - There is a problem with the data SIMBRIEF send - they are not well received by the Aircraft - For exemple the ZFWG was wrong and the P-FPLN is not received (the Recieve F-plana button is not active) Thank you for your help

I got it yesterday during a flight between LFMN and LFPG I got other strange things like the emergency slides appearing while I just wanted to open the doors for the jetways Last but not least, the SIMBRIEF informations for the fuel (so the weight) were not good I am in FS2024 SU5 ...

Hello I have done a lot of flights in Europe with A350 on FS2020. For example a LFBO - EDDM without problem. but yesterday I wanted to fly from KLAX to KSFO …. And it was a nightmare… Why ?

The support says : You can not get the F-PLN when not Darck and Cold

According to the support : "You can't request simbrief with the engines running is what I mean to say. The FCOM says the "CPNY F-Plan request" button should removed when engines are running."

Okay - are you running FS2020 ?

Same here even after 1.0.2 update - in FS2020 - the F-PLN appears after some manipulation (I insert FROM/TO - Flight number - PAX ) and so on But It would be better to have it directly in the INIT page