Mariotm24

Hello, It might be, but it's a bit weird to get a flap 3 TO with almost 4km of rwy, I haven't been able to replicate it. I have attached the TO data from today's flight so it may help. Kind regards, Mario Tena.

Good day! After the updates it looks like the performance calculator still aims for the config 3 take off. Kind regards, Mario Tena.

Good day Kyle, Thank you for your answer, I decided to report because the landing didn't seem to be a hard one and specially because the temperature raises quite a lot when braking during the taxi-in even though I didn't need to brake that much and I always try to brake as soft a possible. Kind regards, Mario Tena.

Good day, Whenever I land the brakes temperature increases abnormally and it's difficult to cool them even using the brake fans. It has been happening in other versions too. Kind regards, Mario Tena.

Good day! Whenever I land at LEMD RWY32L I get the max braking max reverse warning even though I have plenty of runway left. I've been getting this in other versions. Find the evidence attached below. Kind regards, Mario Tena.

Hi Kyle, Thanks again for your quick answer, here is the link with access, sorry about that. https://drive.google.com/file/d/1jenJmgLh4BTAEBAZsV2tqSW9Aj649vMU/view?usp=sharing Kind regards, Mario Tena.

Hi Kyle, Thank you for your quick answer, it's indeed a solution, however is company policy to arrive at the destination with 9.0T or more and I also didn't have this issue in the previous versions. Hope the fuel burn calculations are resolved. Kind regards, Mario Tena.

Yes I think it needs a review, I got the following calculations today and they surprised me, specially the flaps 3 config. It was on msfs2020. Cheers!

Good day! Currently on a flight and I'm getting DEST EFOB on the ECAM, I'm flying at OPT FL, departed with plenty of fuel (57.6T) block fuel was 57.7T. I find it weird because on the past versions sometimes I got that message but it was erased when the reffuelling was completed and now it doesn't dissapear. I've inserted the step climbs and the winds, simbrief says I should arrive with 10.8T and the FMS is currently indicating 7.7T. Evidence below. Kind regards, Mario Tena. LEMDMDPC_PDF_1793019408.17d20674.pdf

Good day! I've been encountering this issue since the very beginning, when I click the buttons they work but nothing appears on the ECAM. I can't upload the video due to its size so here is the link. https://drive.google.com/file/d/1jenJmgLh4BTAEBAZsV2tqSW9Aj649vMU/view?usp=sharing Kind regards, Mario Tena.

Good day! I've noticed that whenever I refill the engine oil it goes up to 23 and the value doesn't seem to be accurate compared to the real aircraft, I'll attached the evidence below. I know it might not be a major issue but it will be nice to adress it. Kind regards, Mario Tena.

Hello guys, Try using the towbar push, I always select that option before every flight and I don't have the issue anymore.

It won´t let me put a ZFW of 133.4T for a POS flight eventhough it's a figure from a real loadsheet and A350 aircraft

Works now, thank you very much for your help!

Gday! That’s exactly what I see but whenever I click on the A350 airliner msfs2020 on the left nothing changes, I still see the TriStar liveries.

Whenever I open the inimanager and I go to the liveries page when I want to change to the A350 liveries it wont work, it only appears the Tristar liveries which is the latest released aircraft. So basically I can´t download any livery.

Gday, After following the above mentioned steps, I still don't receive the ATIS nor METAR. Kind regards.

Sorry about that, it’s now changed, let me know if there is other issue.

There was no station online, however when that happens the aircraft shows the METAR which is not happening in this case

Gday, Sorry for the late reply, here is the link. https://drive.google.com/file/d/1BBTkhnCQ06mK6F8e95Y-kMCnKeYMl7QV/view?usp=drive_link Kind regards.

I'm requesting it with VATSIM.

I don't know why but in all my latest flights the ATIS/METAR wouldn't load for some airports.

Good day, I can't attach the recording because it says it's too big (eventhough it's a 15sec video Xd), but basically during the initial climb and in the ground I can select between both options, but when I reach CRZ lvl I can't anymore.

Whenever I perform an S/C during cruise the aircraft automatically engages the AUTO-DERATE option and it doesn't allow to change it into CLIMB mode.

The following screenshot was taken just before take off, I've noticed that instead of NAV in blue it's RWY NAV, idk if it should be like that