[ALS for runway 01L]

Thanks a lot - keen to see the update 🙂

Bert

[NZPM: Wrong plane on the passenger tarmac...]

Hi XWind!

Thanks for the improvemants on NZPM and the other updates for Rockford - most appreciated...

Have a good time!

Bert

[ALS for runway 01L]

Hello all at iniBuilds!

Thanks a whole lot for KMKE - a long awaited but not expected airport brillantly made as freeware...

May I kindly ask you to change the approach lights system (ALS) for runway 01L from an ALSF-I into an ALSF-II as well with sequenced flashing lights (SFL)? Jeppesen, LIDO and the FAA are reporting this type for this runway, not an ALSF-I.

Thanks again - have a good time!

Bert

[EGGW: ApporachLight Systems and LOC-antennas]

Hello Richboy2307!

I've just a look onto the new version: Thanks for the red side row lights at the CALVERT HIGHs and the LOCALIZER antennas.

Can you please deactivate/delete the Sequenced Flashing Lights (SFL) of the CALVERT HIGH and the Runway End Identifier Lights (REIL) both at runway 25? According to current charts (see my post above please) EGGW doesn't have got one.

Thanks so much for your time - cheers!

Bert

PS: Can the "Luton DART" train be animated please?

[[v1.0.0] Rain inside the easyJet hangar]

Maybe the drainage is damaged and must be fixed 😉 

I see the same - thanks!

Bert

[EGGW: ApporachLight Systems and LOC-antennas]

Hello dear iniBuilds-developers!

Thanks for making EGGW - a really fine piece of software... Even the difficult hill structures in the west are made very well: Congratulations!

May I kindly ask you to fix the following?

1. Both LOCALIZER antennas are missing as 3D models - please insert them.

2. Both Approach Light Systems are showing white side row lights - they should be lit in red instead as they are CALVERT HIGH aka HIALS-II. See the attached graphic please.

Thanks a lot for your time - kind regards!

Bert

[KRFD again...]

Hello all at XWind Studios!

I have to retrun to your well made KRFD as I've overseen a wrong build approach light system for runway 7: Please lower all the poles down all the way to the ground as they are now a real danger for incoming planes because they are way to high. On Google Earth is clearly to see that the lights are all on the ground.

Thanks a lot - kind regards!

Bert

[KRFD: Missing SFL at runway 7]

Hi all at XWind!

Thanks a lot for making the "new kid on the block" in the Chicago's airport's area: KFRD... A very, very well made airport scenery.

Please activate the Sequenced Flashing Lights (SFL) for the ALSF-II approach light system at runway 7 as this are missing actually.

Thanks so much - take care!

Bert

PS: Can you please get me bert.groner(at)fsmagazin.de your logo as big as possible (minimum width at 30 cm) and background transparent as AI, EPS, PNG. PSD, SVG or TIF? I want to recommend you sceneries to my readers and need the logo for that purpose.

[NZPM: Wrong plane on the passenger tarmac...]

Hello all at XWind!

Thanks for making Palmerston airport - it's a great scenery.

May you please check the following?

1. At the passenger tarmac I see a Diamond twin prop there beside (correct) Dash 8-Q400. It shouldn't be there.

While beeing at NZPM there have been a lot of parking spots for smal airplanees free.

2. May you place some static GA airplanes at the apron of the Massey University School of Aviation? Now it looks very empty...

3. What about creating the Palmerston North Regional Hospital with the helipad and hangar for virtual heli pilots?

Thanks a lot in advance - have a good time!

Bert

[NZDN]

Hello all at XWind!

I've had one CTD while trying to get from your NZDN scenery to NZPM via the airport menu. Once restarted MSFS and going directly to NZPM it works.

Just for your Information...

Take care!

Bert

PC: NZPM is a relly nice scenery...

[KJFK: LDIN for runways 13L/R]

Hi Nico-Gumby!

That was it - after switching from TAA to the other modes (Nvidia DLSS Superresolution, FXAA or DLAA) the LDIN are clealy visible again - even at daytime.

Thanks so much!

Bert

PS: By the way a big THANK YOU to the whole iniScenedev team for the important update on PHNL. Now this scenery is perfect - except the not animated tram 😉 

[Aberdeen/Dyce (EGPD)]

Will have - thanks - keen to get the update...

Take care!

Bert

[Aberdeen/Dyce (EGPD)]

Hello all at AuraScenery!

Thanks for making EGPD. Looks really nice.

I kindly ask you to fix the following:

1. Please remove the Touch Down Zone lighting (TDZ) at both ends of runway 16/34 - in real there are none.

2. Please remove the Runway End Identifier Lights (REIL) of runways 16/34 as there are none in real.

3. Please change the 3D models of the glidepath antennas with similar red/white ones plus two or three white cross bar antennas as this rendition will meet the real look of such antennas. Specimen attached.

4. Can you please ad a simple single antenna mast to the red/white DME/TACAN housing opposite the terminal?

Thanks so much in advanve - most appreciated - have a good time!

Bert

364429.pdf

[KJFK: LDIN for runways 13L/R]

Hello iniScene, good day!

I've just discused the LDIN approach for KJFK's runways 13L/R with other PC pilots which told me that the LDINs within your scenery are hard to see - even at night.

I was able to confirm this and remember that and remember from my review they have been brighter before. Maybe a simulator update has made them smaller or less brighter?

Will it be possible to make the rabbit lights more visible (again) e.g. by making them bigger or brighter?

Thanks so much - have a good day!s

Bert

 

[Minor things to fix please...]

Great news, thanks so much, Nico!

Bert

[Minor things to fix please...]

Sorry - I forgot to point out that the DME is located south of the terminal's apron. My post was about the NDB instead.

Thanks a lot!

Bert

[Minor things to fix please...]

Thanks a lot for your time, Nico...

According to the current airport ground chart of the british NATS the NDB should be slighty north of the radar - see the attachmet please. Of course the separtion could be done for graphical reason. So no problem to keep the way it is.

Have a good day!

Bert

[Minor things to fix please...]

Hello iniScene!

Thanks for making EGNM - a very good looking airport...

Pelase have a look at the items following:

1. NDB
...is the NDB standing west of taxiway N and north of taxiway D co-located with your present animated terminal radar or is there an antenna mast missing?

2. G/P antenna ILS Runway 32
Please have a look at the angle of this transmitter. It looks like it is slighty off 138 degrees.

Thanks a lot in advance!

Bert

[OMAA - some findings to be fixed please]

Hello iniScene!

Thanks a whole lot for making OMAA - the second important and nearly perfect in the UAE...

 I kindly ask to fix the following items:

Runway 13R
...the Approach Light System (ALS) should be a ALSF-I (with Sequenced Flashing Lights - SFL) instead of the present CALVERT - and please remove the Touch Down Zone ligthing (TDZ) here.

Runway 31L
...the ALS should be an ALSF-II with SFL instead of the present CALVERT HIGH - should look like the ALS for Runway 31R has been made correct including the TDZ.

VOR/DME ABU DHABI ADV 114,25 MHz
...please place a 3D model for this VOR/DME here. You may easily use the in stock model which you've used for your stunning KLAX. They are almost the same...

Thanks so much for your time - never stop designing!

Bert

 

[Rail Station Building Problem...]

Hi Nico!

That's a real pitty - may I encourgage you to build the tracks anyway? The rail belongs to this airport as well as the station at the Emirates administration building. And I don't think that the performance will be lost dramatically.

Thanks - have a  good time!

Bert

[CTD with Dubai Skydive Dubai]

Thanks Nico - hope you get this bridges lifted. There are some...

Have a good 2024!

Bert

[CTD with Dubai Skydive Dubai]

Hello everyone here!

Waiting for Christmas is a good time to test iniBuilds new OMDB. By the way thanks iniBuilds for making - as well for the accompaning freeware...

Frist impression was a CTD - at this moment had been installed:

iniBuilds OMDB
iniBuilds Skydive Dubai
Orbx' Dubai City Pack

I've deleted Asobo's OMDB from the OneStore folder but this was reinstalled immediately I fired up MSFS again. Then I've deinstalled the Dubai City Pack and it works.

Two questions to you and the dev's - and one inquires for them:

1. Is Dubai City Pack still nessessary with Dubai Skydive?
2. If nessessary can you ensure compatibility then (...after the holidays ;-)?
3. Can you take care of the sunken brigdes at Dubai and lift them out of the water please?

Thanks so much - have relaxing holidays and a happy, healthy 2024 - may it be much more peaceful than it's predecessors!

Bert

[Approach Lights at EGHI and missing Locator/NDB antenna]

Howdi Nico!

Really good news for another perfect scenery.

Another thing I've forgotten yesterday: On the charts form all three before named providers both the 02 and 20 have PAPI's only on the left side.

If this is correct please remove the right side PAPI's.

Thanks for that - have a good time!

Bert

[Approach Lights at EGHI and missing Locator/NDB antenna]

Hello everyone here and many thanks to iniScene for making EGHI - great stuff!

May I ask two questions please?

1. It's about the (correct) approach lighting types: Jeppesen shows currently a british CALVERT (HIALS) at both sides, LIDO (unnamed) short ones which iniScene is using and the british NATS a graphical type looking similar to a CALVERT: What is correct? Does anyone knows that from personal visits there?

2. I kindly ask the dev's to insert the Locator/NDB-antenna close to the glideslope antenna at runway 20. It is right now missing.

Thanks a lot - have a good day!

Bert