mseder

I can offer a MSFS2020 profile, it that would help!

"D:\inibuilds-aircraft-a350\Resources\Documentation" No, that's not the latest. v1.0.7 functionality is missing

One more agree

A320Neo FBW, iniBuilds and LVFR 330 all supports the TO CONFIG functionality which I think is a pretty basic functionality. If they can handle BTV they should be able to handle more basic functionality. Pressing the TO Config button should turn the TO Config line in the display to green in order to confirm all tests are ok.

Where can I find an updated A350 manual?

Hi V1.0.7 I still haven't found out what is the best sequence of boarding and refueling the A350 using the build in GSX and GSX Load. I usually try it this way 1 First enabling GSX in the OIS GROUND tab 2 GROUND GSX Refuel request 3 LOADSHEET Load with GSX By doing the above refueling is not performed. Suggestions? Mats

Considered fixed as tab (show toolbar) key no longer triggers text input and blocks rudders

Somebody who knows how to turn on a overhead light

Hi Haven't seen TO Config button had any effect. Usually clicking on it turns the message green or display what is not configured for TO MSFS2020

This topic is placed in the MS2024 category, but this is discovered in MSFS2020, admin?

Updating maintenance seem to be the solution. And one may wonder, where are the warning signs?

"Whenever I import any long-haul route from SimBrief, the flight management computer freezes." Sounds like another topic. This thread is about engines won't start.

Such basic things MUST be tested before shipping out a new version. I'm happy I always save the current version. The new GSX integration seemed promising though.

Nothing happens when turning on nr 1 fuel. Just as simple as that. See images Restarted MSFS, did not help Went back to v1.0.4, all good MSFS2020

see

Hi and thanks for getting back on this. I understand your need for as much info as possible, been a developer my whole life. And my analytic mind has really been searching for patterns, user (me) interactions etc. It's really been hard to find something except for today actually. First, I usually fly in VR, but the issue also has happen when not. So, taxing to my gate the joystick and thrustmaster thottle looses control. Today I really watched every single interaction from my side and when hitting the TAB key, to open the toolbar in VR, the EFB reacts and that pink line informing me of lost control shows up. I then hit the TAB ley again and it disapperas. OR if i watch the EFB (OIS window) the keyboard-image popup is there waitng for me to input something I then close it (down arrow), the pink info line dissapears and everything works. This only happens if I have any of the "user input" pages currently open in the EFB like LOADSHEET, TO PERF or TERML CHART This is at least one user story, maybe this IS the whole issue, I'll continue watching while flying this wonderful aircraft. MSFS2020 A350 v 1.0.4 GEForce 4090 32 GB mem CPU 12800 Add ons - GSX Pro - Navigraph charts

Same here with version 1.0.4 Was lucky to save the previous version 1.0.3. Had it restored and everything was back to normal.

Problems remains now with version 1.0.4

Same here

For A350 and A320 V2 seating position section is missing from the cameras.cfg file. I had to add the "Title="PilotVR"" section myself in order to position the pilot correct in the cockpit. Below section works if added to cameras.cfg [CAMERADEFINITION.40] Title="PilotVR" Guid="{2EF77F56-4CDD-4E3C-8C87-BE2A39E99C66}" UITitle="TT:GAME.PANEL_CAMERA_PILOT_VFR" Description="" Origin="Virtual Cockpit" Track="None" TargetCategory="None" ClipMode="Normal" SnapPbhAdjust="Swivel" PanPbhAdjust="Swivel" XyzAdjust=1 ShowAxis="YES" AllowZoom=1 InitialZoom=0.35 SmoothZoomTime=2 BoundingBoxRadius=0.1 ShowWeather=1 CycleHidden=0 CycleHideRadius=0 ShowPanel=0 MomentumEffect=1 ShowLensFlare=0 PanPbhReturn=0 SnapPbhReturn=0 InstancedBased=0 NoSortTitle=0 Transition=0 PitchPanRate=20 HeadingPanRate=60 PanAcceleratorTime=5 XYZRate=0.25 XYZAcceleratorTime=0 ZoomPanScalar=1 Category="Cockpit" SubCategory="Pilot" SubCategoryItem="PilotVR" :InitialXyz = -0.030188,0.544792,12.271154 InitialXyz = -0.030188,0.48,12.5 InitialPbh = -7.5, 0, 0 Mats

Have this as well (V 1.0.2), I use to disable and enable GSX integration, 2 quick clicks.

I end up in these situations as well. Everywhere there are references to clearing the WASM folder. Though googling a lot I still don't know where to find it, anyone? Mats

It's obvious that the GSX integration is a mess and doesn't seemed to be tested that much before the 72 Euro launch Here are the procedures I use that repeteadly takes me to a point where GSX do its job and the ZFW, ZFWCG and BLOCK values are set according to Simbrief Please let me know if things are working or not working or if there is another procedure that works better. - Ensure that in the GSX "customize aircraft" settings has "Show MSFS Fuel and Cargo...." checked - Start flight and restart GSX (restarting coautl is not enough) from outside like from the taskbar - Aircraft: Turn on PWR Bat + ext pwr - EFB "FLT OPS STS" click "Simbrief Import" - EFB "GROUND" Enable GSX - GSX Menu Request refueling and boarding - EFB "LOADSHEET" click Simbrief Import - SET ZFW & FUEL (Could be done before the GSX Request as well, as stated by ekosif above) - GSX Message: Refuel complete - GSX Message: Boarding started - GSX ask for an amount of fuel. Sometimes the simbrief choice is there, problem solved and sometimes not. Often it doesn't matter what amount of fuel to the aircraft that is chosen, it anyway will be what is set in the EFB LOADSHEET. Choose any but check out when doing the Fuel & Payload the amount and correct if neccessary - GSX Message: fueling starting (yeah and a moment ago it was complete?) - GSX now thinks refueling is complete with the Simbrief value - GSX opens cargo doors - Boarding starts and is increasing in the EFB loadsheet view... after a long while - GSX closing cargo doors - GSX Message: Boarding complete But TOW and CWCG is still empty in the FCU - FMS FUEL & Loading update the ZFW, ZFWCG and BLOCK (check that it's according to the SimBrief value and if not, correct it: EFB "LOADSHEET" )by just click and hit enter, now the values will be reflected in the FCU - DONE Some reflections ---------------------- - The GSX menu sometimes needs to be clicked on twice before current status is updated - GSX integration is that good? Well it's very easy to miss a message and then the loading process halts. You must have that GSX dropdown menu clicked/viewed all the time which consumes attention from working with checklist, navigation planning etc. IMO: If some systems wants to tell me something, put it in front of my face - Sometimes there are beeps, can't find any announcements, that just makes me nervous. What did I miss? - What about the iniBuild Manual and the above concerns? Zero info! Mats

Restarting the flight with saved FLT in the taxi situation puts me in the same locked situation Restarting the sim and then loading the saved FLT in the taxi situation resets the problem and I can control the throttle, joystick and camera again. Mats

Still suffer from the same problem running MSFS2020. Almost every time i land and start taxi, control is lost. I desperataly try to click somewhere in the EFB or anywhere. It doesn't seem that I'm stuck in a textbox as I can click myself atound. I restarted the GSX app (from outside) and then I couldn't even move my mouse or anything. Absolutely zero contact with the sim. I have to stop the MSFS. The problem remains for A350 and for no other aircraft Support please! Is there a log or something I can check? Mats